Allen + Roth Loveseat & Coffee Table Set
Item #: 5998250 | Model #: LOS23006-LTR | Ref #: SG24876
Brand: allen + roth
Product Overview
Thank you for purchasing this allen + roth product. These instructions are designed to help you assemble and enjoy your new loveseat and coffee table set.
For more information, visit Lowes.com, search the item number, and refer to the Guides & Documents tab on the product's page.
Warranty Information
This warranty applies to defects in materials and workmanship for original purchasers of patio furniture used for personal, residential purposes. Frames and fabric are warranted for one (1) year.
Exclusions: This warranty does not cover items used for commercial purposes, display models, items purchased "as is," or damage caused by acts of nature, vandalism, misuse, or improper assembly. Fading, discoloration, tabletop breakage, corrosion of hardware, and damage to frames or welds due to improper assembly or natural causes are also excluded.
For warranty service, contact customer service at 866-439-9800 (8 a.m. - 8 p.m. EST, Monday - Sunday) or ascs@lowes.com.
Customer Support
Questions, problems, or missing parts? Before returning to the store, please contact us:
Phone: 866-439-9800 (Monday - Sunday, 8 a.m. - 8 p.m. EST)
Email: ascs@lowes.com
Care and Maintenance
- Immediately clean any spot or stain.
- To clean, wash with mild soap, rinse with water, and let air dry.
- Do not use strong solvents or bleach, as they may damage the surface.
- Use an outdoor cover (sold separately) to extend the product's life.
Safety Information
Please read and understand this entire manual before assembling, operating, or installing the product.
Weight Capacity: 450 lbs. (loveseat) [approx. 204.54 kg]
Caution: Assemble on a soft, non-abrasive surface.
Preparation
Before beginning assembly, ensure all parts are present. Compare parts with the package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 25 minutes
No additional tools required.
Assembly Instructions
General Warning: Do not tighten bolts until the product is completely assembled.
Package Contents
Part | Description | Quantity |
---|---|---|
A | Loveseat Frame Base | 1 |
B | Loveseat Seat/Back Frame | 1 |
C | Coffee Table Leg | 4 |
D | Coffee Table Top | 1 |
E | Armrest Frame (Left/Right) | 2 |
F | Back Support Bar | 1 |
G | Seat Support Bar | 1 |
H | Coffee Table Support | 2 |
Hardware Contents
Note: Hardware shown actual size.
Hardware ID | Description | Quantity |
---|---|---|
AA | M8 x 20mm Bolt | 12 |
BB | M6 x 20mm Bolt | 6 |
CC | M6 x 38mm Bolt | 3 |
DD | Washer | 12 |
EE | Washer | 12 |
FF | Allen Wrench | 1 |
GG | Nut | 9 |
HH | Nut | 9 |
II | Bolt | 12 |
JJ | Bolt | 9 |
Step 1: Assemble Loveseat Base
Attach the armrest frames (E) to the loveseat frame base (A) using M8 x 20mm bolts (AA) and washers (DD). Secure with nuts (GG). Refer to diagram 1.
Step 2: Attach Seat/Back Frame
Connect the loveseat seat/back frame (B) to the assembled base (A) and armrest frames (E). Use M6 x 20mm bolts (BB) and washers (EE) for the seat/back frame to base connection. Use M6 x 38mm bolts (CC) for the back support bar (F) and seat support bar (G) connections to the frame. Secure with nuts (HH). Refer to diagram 2.
Step 3: Assemble Coffee Table
Assemble the coffee table by attaching the legs (C) to the coffee table top (D) and connecting them with the support bars (H). Use the provided hardware, including bolts (AA, BB, CC, II, JJ), washers (DD, EE), and nuts (GG, HH), as indicated in diagram 3 to secure all components.
Step 4: Final Assembly and Tightening
Once all parts are assembled and the product is standing correctly, go back and fully tighten all bolts and nuts. Refer to diagram 4.