Dewenwils Outdoor Digital Timer

Product Layout

The outdoor digital timer features the following components:

• 1. Light Sensor: This sensor turns the timer on at dusk and off at dawn.
• 2. Display: Indicates the current operating mode.
• 3. Select Button: Used to select and switch between operating modes.

The timer unit has a digital display and several buttons for operation. It is connected via a cord to an outdoor-rated receptacle.

Operation Instructions

To operate the timer, plug it into a standard outlet and press the SELECT button to choose a setting:

* Cycle repeats every 24 hours.

* Once activated at dusk in the specific mode, the program cycle will be completed. Any light sources won't interfere with the program cycle.

Helpful Tips

• When set to "ON", the timer provides continuous power until switched to "OFF" or another mode.
• In sensor mode, temporary light sources will not interfere with the photocell function unless they are on for more than 15 minutes. In such cases, the timer will shut off until darkness is restored, preventing flickering.
• Once programmed in the 1-9 hr mode at dusk, the cycle completes before resetting. External lighting sources will not interfere with the active timer program.

Electrical Ratings

• Input Voltage: 125V, 60Hz.
• Max Power Rating: 125V, 60Hz, 1625W, 13A Resistance, 13A General Use, 1000W Tungsten, 500VA Electronic Ballast, 120Vac, 60Hz, 8.3A Ballast, 1/2HP.
• Cord: SJTW 16/3 AWG.

Safety Information

Federal Communications Commission Interference Statement

This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception. If interference occurs, users are encouraged to try to correct it by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.

One Year Limited Warranty

DEWENWILS warrants this product to be free from defects in material and workmanship for a period of one year from the date of purchase. Warranty is void if damage is caused by misuse or improper installation. Email: support@dewenwils.com. Our dedicated customer service team will get back to you within 24 hours.

The product is UL Listed and Made in China.

Important Warnings

TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK OR PERSONAL INJURY, PLEASE STRICTLY FOLLOW THE INSTRUCTIONS:

• Suitable for use with outdoor appliances – raintight when mounted vertically with the receptacle facing downward. Not for water immersion. Store indoors when not in use.
• Install the cord and unit above ground level at least 1.4 m with the receptacle facing downward.
• Do not connect any devices which exceed the maximum ratings of the timer.
• Do not immerse in water.
• Children are not allowed to use the timer without supervision.
• Do not disassemble or repair the product, but only by authorized service personnel.
• Always unplug and store indoors when not in use.