Dewenwils Outdoor Digital Stake Timer

Thank you for your purchase.

Please contact us if you have any problem. Email: support@dewenwils.com. Please attach your User Name or Order ID so that we can assist you better.

Warning: To reduce the risk of fire, electric shock or personal injury, please strictly follow the instructions.

• Do not connect any devices which may exceed the maximum ratings of this outlet.
• Do not immerse in water.
• Children are not allowed to use the timer outlet without supervision.
• Do not disassemble or repair the product, but only by authorized service personnel.
• Please always unplug and store indoors when not in use.

Installation

As shown in the figure, connect the three sections together. Be sure to firmly tighten the stake to the body before installing into the ground.

Tips: If the ground is too hard to insert the stake, digging a hole that matches the stake with a hard object will be perfect.

Press the switch to "I" position.

Button Layout

• 1. PROG: To review the timer events.
• 2.: Press to begin setting events or time.
• 3.: To clear setting.
• 4. MODE: Scroll between the timer status options.
• 5.: To increase time and day setting.
• 6.: To decrease time and day setting.
• 7.: Manual override the current programmed events
• 8. 2H: Instant On for 2hrs then off.
• 9. 8H: Instant On for 8hrs then off.
• 10. RESET: Reset hole - Reset all the functions
• 11. Photocell

Operating Instructions

Before initial use, plug the timer in for at least 30 minutes to charge the internal battery. After the screen displays, the unit is ready for programming.

1. Reset

Before programming, all settings should be reset. Please insert a non-conducting stick into the hole to reset the timer. As shown in Figure 1.

Figure 1: Shows a diagram of the timer with a stick being inserted into the reset hole.

Warm Tip: The reaction time is 15 seconds for every setting. It means that once longer than 15 seconds waited when you finished your current setting, the timer will save your setting and go back to normal current time display while if you want to continue the settings, you have to enter into the settings from the first step.

2. Current Time Setting

Example: If it is 6:10 pm Wednesday, please follow below steps to set the current day and time.

1. Press and hold the "+" button for 2 seconds to enter the current time settings.
2. Press "+" or "-" button to set the correct day until "WE" displays on the top of the screen, shown as Figure 2.
3. Figure 2: Shows the timer display with "WE" indicating Wednesday.
4. Press the "PROG" button to enter the hour setting. Press "+" or "-" button until "6:00pm" displays on the screen, shown as Figure 3.
5. Figure 3: Shows the timer display with the hour set to 6:00 PM.
6. Press the "PROG" button to enter the minute setting. Press "+" or "-" button until "6:10pm" displays on the screen, shown as Figure 4.
7. Figure 4: Shows the timer display with the time set to 6:10 PM.

During the setting, press the "PROG" button for 3 seconds or wait for 15 seconds to return to the current time display.

3. ON/OFF Program Setting

NOTE: While setting the programs, press the "X" button to clear the programmed time. Once complete the programs settings, press the "MODE" button, press the "PROG" button for 3 seconds, or wait for 15 seconds to restore your programs and return to the current time display.

Example: If now is 6:10 PM Wednesday, and you want it on at 7:30 PM / off at 9:00 PM everyday, please follow below steps to set the ON/OFF setting.

1. Press the "PROG" button and "1 ON" will appear on the display, shown as Figure 5.
2. Figure 5: Shows the timer display indicating "1 ON".
3. Press the "PROG" button to enter the setting program, the "MO" will blink, shown as Figure 6.
4. Figure 6: Shows the timer display with "MO" blinking, indicating Monday.
5. Press the "+" or "-" button to select the correct day such as: MO, TU, WE, TH, FR, SA, SU (everyday), shown as Figure 7. Other options include MO TU WE TH FR (workday) and SA SU (weekend).
6. Figure 7: Shows the timer display with "MO TU WE TH FR SA SU" indicating everyday.
7. Press the "PROG" button to enter the hour setting. Press "+" or "-" button to set the desired hours for your timer to turn on, shown as Figure 8. Be sure that AM or PM appears correctly.
8. Figure 8: Shows the timer display with the ON hour set.
9. Press the "PROG" button to enter the minute setting. Press "+" or "-" button to set the desired minutes for your timer to turn on, shown as Figure 9.
10. Figure 9: Shows the timer display with the ON minute set.
11. Press the "PROG" button to enter the first OFF setting, "1 OFF" will appear on the display. Repeat steps "a" to "d" to set your desired OFF time, up to 8 on/off program settings.

(There are total 8 ON/OFF settings. When you choose AUTO mode, you could set no more than 8 ON/OFF settings, every setting has its own DAY/HOUR/MINUTE procedure, while they are independent and do not interfere with each other.)

4. MODE Setting

Press the "MODE" button constantly to choose the desired mode. The mode will show on the left screen. Options include RDM, TIMER, PHOTOCELL.

Press the "+" or "-" button to manually override the on/off status.

Display Modes:

• Always off: The timer is always off.
• RDM: Security feature. Turns on at a random time and remains on for 15 minutes.
• RDM MO: Up to 5 on/off events every day. The on/off events are built into the timer, turn on at a random time and the on time is different each day, creating a more "lived-in" look.
• TIMER: On/Off at your exact programmed time.
• PHOTOCELL: Turn the power on at dusk, off at dawn.
• Always on: The timer is always on.

The timer only triggers the power on and off at the specified times. It will only power on when the timer reaches the scheduled "on" time. It should power on the next time that the timer reaches the "on" time. Make sure that you have chosen the right AM/PM setting on the timer as well.

5. Photocell Setting

Press the "MODE" button to select the photocell function. Turn on the power at Dusk and turn off the power at Dawn automatically.

6. Countdown 2H or 8H

Note: You should plug the timer into the outlet first to operate the countdown mode.

Press the "2H" or "8H" button to turn power on instantly for 2 hours or 8 hours. Once the power is turned off after 2 hours or 8 hours, the existing timer programs will resume to work according to the previous 8 programmed times.

Power Back-up Feature

In the event of a power failure, the timer will retain its settings for about 3 months, if the battery is fully charged. You do not need to worry about the loss of program.

Specifications

• Input Voltage: 125VAC, 60Hz
• Max Power Rating: 13A 1625W
• Cord: 6ft 16AWG SJTW

Safety Information

Risk of Fire. Not for permanent installation. Use only with outdoor equipment, Christmas-tree, or other seasonal decorative-lighting products having a total of 13 Ampere maximum. Do not install or use this product for more than a 90-day period.

If using Christmas tree or decorative - lighting products that are not marked with an ampere rating, connect no more than 140 screw-base lamps (C7 or C9) or 12 strings with midget (push-in) lamps to this cord set.

Cord sets shall be plugged into a GFCI - protected receptacle.

If using an outdoor-use cord set for an extended period of time (greater than 90 days) please consider hard wiring a permanent outdoor-use receptacle rated for year-round use in the area that power is needed. Please contact a Licensed electrician for proper installation of permanent wiring.

After completion of installation, the connector shall be maintained a minimum of 6 inches above ground.

SUITABLE FOR INDOOR/OUTDOOR USE - STORE INDOORS WHILE NOT IN USE.

CAUTION: PLUG INTO GROUND FAULT PROTECTED RECEPTACLE ONLY.

Federal Communications Commission Interference Statement

This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.

One-year Limited Warranty

Dewenwils warrants this product to be free from defects in material and workmanship for a period of one year from the date of purchase. Warranty will be void if damage is caused by misuse or improper installation. Please contact us if you have any questions. Email: support@dewenwils.com. Our dedicated customer service team will get back to you within 24 hours.

® UL LISTED