Geberit AquaClean Tuma Comfort/Classic

Overview of Required Parts

The following diagrams illustrate the necessary components for installation, depending on the specific toilet model and mounting system.

Scenario 1: Standard Toilet Installation

Components: Toilet, mounting hardware (Part No. 147.034.00.1).

Scenario 2: Water Supply Connection

Components: Toilet, water supply hoses and fittings (Part No. 147.034.00.1 + 115.438.00.1).

Scenario 3: Alternative Water Supply Connection

Components: Toilet, alternative water supply hoses and fittings (Part No. 147.034.00.1 + 240.396.00.1).

Scenario 4: Wall-Hung WC Frame Installation

Components: Wall-hung WC frame, mounting hardware (Part No. 131.100.TA.1 and 131.102.TA.1).

Mounting Frame Options and Water Connection

Detailed diagrams show water connection requirements, including pipe diameter (Ø 16 mm) and connection thread (R 1/2"). Required clearances are indicated (e.g., ≥ 2 cm).

Mounting Frame: Sigma/Omega, Height: 112 cm

Required Part: 147.035.00.1

Mounting Frame: Omega/Kappa, Height: 82 cm / 98 cm

Required Part: 147.036.00.1

Mounting Frame: Omega PEX

Required Parts: 240.921.00.1 + 147.035.00.1

Diagrams illustrate pipe routing and necessary clearances for installation.

Dimensional Specifications and Electrical Connections

Technical drawings provide precise dimensions for the AquaClean Tuma seat and the required mounting hole positions on the wall. Electrical connection points are labeled A and B.

Installation Steps

Step 1: Mounting the Fixing Bracket

Attach the mounting bracket to the wall using appropriate screws and wall plugs. Ensure it is securely fastened.

Step 2: Attaching the Seat to the Bracket

Secure the toilet seat to the previously mounted bracket.

Step 3: Securing the Seat to the Mounting Plate

Use a PH 2 screwdriver to attach the toilet seat to the mounting plate. Follow indicators for correct tightening (✔️) and avoid over-tightening (❌).

Step 4: Placing the Seat onto the Mounting

Carefully lower the toilet seat onto the installed mounting structure.

Water Supply and Electrical Connection

Step 5: Connecting Water and Electrical

Connect the water supply hose and the electrical cable to the designated ports on the toilet seat.

Step 6: Attaching Seat and Lid

Complete the installation by attaching the seat and lid securely.

Initial Setup and Checks

Step 4 (continued): Filling Cistern and Leak Check

Fill the toilet cistern and carefully inspect all water connections for any signs of leaks.

Step 1: Attaching the Flush Plate

Install the flush plate onto the cistern mechanism.

Remote Control Setup and Pairing

Remote Control Setup: Follow the on-screen prompts on the remote control or associated device.

Language Selection: Choose your preferred language from the available options: Deutsch, English, Français, Italiano, Nederlands, Dansk, Ελληνικά, Türkçe.

Pairing: Pair the remote control with the toilet seat by following the on-screen instructions. A 'Connection established' message will confirm successful pairing.

Indicator Lights: A blue light ? indicates normal operation. A red light ? indicates an error or fault condition.

AquaClean Tuma Comfort Features and Adjustments

The Geberit AquaClean Tuma Comfort offers various adjustable features controlled via the remote.

Spray Patterns and Temperature

Adjust spray patterns and water temperature to your preference.

Remote Control Functions

Use the remote control to fine-tune settings such as:

• Spray intensity
• Spray position
• Dryer function and temperature
• Oscillation
• User profiles

Follow the on-screen guides on the remote for specific adjustments.

Contact Information

For further assistance or information, please refer to Geberit International AG.

Address: Schachenstrasse 77, CH-8645 Jona

Email: documentation@geberit.com

Website: www.geberit.com