Geberit AquaClean 4000 Installation Manual
This document provides instructions for the installation of the Geberit AquaClean 4000 shower toilet seat.
Before You Begin
Ensure you have the necessary tools and components. Refer to the compatibility checks and required clearances.
? The initial diagram shows a standard toilet, followed by an arrow pointing to a checkmark icon (✔️), indicating readiness or compatibility.
The following diagrams illustrate different plumbing connection kits required for installation, each associated with a specific part number:
- 115.438.00.1
- 240.396.00.1
- 131.100.TA.1
- 131.102.TA.1
Diagrams show installation requirements, including a minimum distance of 2 cm from the wall. Different mounting frame types are presented:
- Sigma/Omega, Height: 112 cm, with connection kit 249.801.00.1
- Omega/Kappa, Height: 82 cm / 98 cm, with connection kit 240.635.00.1
- Omega PEX, with connection kits 240.921.00.1 + 249.801.00.1
Technical drawings provide detailed dimensions for the Geberit AquaClean 4000 seat and its installation on a toilet. Dimensions include height, width, depth, and mounting hole spacing. A diagram shows the water inlet connection (R1/2) and electrical connection points.
The top section of the page displays side view dimensions of the seat (e.g., 55 cm, 15 cm, 3 cm, 4 cm, 17 cm, 40 cm). The bottom section shows top view dimensions of the toilet bowl and mounting points (e.g., 30 cm, 5-9 cm, 14 cm, 13-165 cm, 26 cm, 10 cm, 505 cm). The right side shows top view dimensions of the toilet bowl (e.g., 13-165 cm, >45 cm, 41-455 cm, 365-41 cm, 32-39 cm). Information icons (?) labeled 967.915 and 967.916 are present.
Installation Steps
Follow these steps carefully for proper installation. Ensure all connections are secure and torqued correctly.
Step 1: Water Supply Connection
Diagrams illustrate connecting the water supply hose. Measurements for pipe placement are indicated (e.g., ≥ 75 mm, ≥ 9 mm). A 24 mm wrench (? 24 mm) is shown for tightening connections.
Steps for flushing the water system (Section 2B) before final connection. Water is directed into a bucket for approximately 10 seconds (⏳ 10 s).
Step 2: Mounting the Seat
Illustrates attaching the seat to the mounting bracket. This involves aligning and securing the seat base with screws.
Shows the final attachment of the seat to the toilet bowl. A torque specification of 1.5-2.2 Nm is indicated for securing the mounting bolts.
Diagrams show the process of connecting the electrical cable to the seat unit.
Illustrates correct (✔️) and incorrect (❌) methods for attaching the seat to the toilet bowl.
Step 3: Electrical Connection
Diagrams show connecting the electrical cable to the seat unit. Ensure the power cord (?) is plugged into a suitable outlet. The 'ON' indicator light is shown.
The document indicates connecting the power cord according to the outlet's position.
Operation and Settings
Diagrams illustrate the adjustment of various functions via the control panel. This includes adjusting water temperature (?️), spray intensity (?), and other settings.
- User detection via a sensor is shown, with color indicators (blau, blue, bleu, blu) for different modes or settings.
- Icons on the control panel are depicted: ON/OFF (power symbol ?), temperature adjustment (thermometer ?️), spray intensity (water droplet ?), and a cross (❌) for cancelling or deactivating.
- Step 5 indicates a duration of > 180 seconds (⏳ > 180 s) for a specific function.
Step 6 shows how to lift the seat for cleaning. An informational section (?) demonstrates user detection with a timer (00:10:00) and shows control panel icons for settings like ON/OFF, temperature (?️), and spray patterns (?), with a crossed-out icon (❌) indicating a disabled function.
Technical Information & Contact
For further information, please refer to the contact details below.
Geberit International AG
Schachenstrasse 77, CH-8645 Jona
Email: documentation@geberit.com
Website: www.geberit.com
Spitzenleistungen in der Sanitärtechnik. Weltweit. | Geberit Gruppe
