Stanley SRP 3860 Compaction Reversible Plate Parts Manual
Machine Information
This manual provides essential information for the Stanley SRP 3860 Compaction Reversible Plate. It includes safety regulations, operating instructions, and maintenance instructions. Following these instructions will help simplify operation, avoid malfunctions, increase reliability, and extend the service life of the machine, while also reducing repair costs and downtime.
Always keep these instructions at the place of use of the machine and operate it only as instructed.
Important Safety Note: Comply with all safety provisions, rules for safety and health protection at work, and applicable accident prevention regulations. Observe corresponding rules and regulations valid in your state or country.
Stanley is not liable for machine function when used improperly or for unintended purposes. Operating errors, improper maintenance, and the use of incorrect operating materials are not covered by the warranty.
Stanley reserves the right to make technical changes without announcement.
Please Enter (Data on Machine Type Plate):
- MACH.-TYPE: [Input Field]
- MACH.-NO.: [Input Field]
- ENGINE-TYPE: [Input Field]
- ENGINE-NO.: [Input Field]
Contact Information:
Stanley Hydraulic Tools
3810 SE Naef Rd
Milwaukie, OR 97267
Ph: 503-659-5660
Fax: 503-652-1780
Adhesives
The following table lists sealing and bonding adhesives recommended for use with the SRP 3860:
| Item | Part # | Quantity | Description | Size |
|---|---|---|---|---|
| A1 | 2-9L0 00 002 | 1 | Loctite 262 | 250 ml |
| A2 | 2-806 05 260 | 1 | Loctite 5205 | 300 ml |
| A3 | 2-806 02 010 | 1 | Shell Alvania R3 | 1.0 kg |
| A4 | 2-9IH 00 001 | 1 | Epple 22 | 250 ml |
| A5 | 2-9K0 00 020 | 1 | Klüber 46 MR401 | 0.75 kg |
| A6 | 2-806 05 060 | 1 | Atmosit Compact | 75 ml |
| A7 | 2-806 05 200 | 1 | Sico Met 50 | 20 g |
| A8 | 2-806 05 170 | 1 | Omni Visc 1002 | 600 g |
| A9 | 2-806 02 050 | 1 | Shell Alvania EP1 | |
| A10 | 2-806 05 310 | 1 | Beta Link K1 | |
| A11 | 2-806 03 017 | 1 | Metaflux | |
| A12 | 2-806 05 290 | 1 | Loctite 5910 | 300 ml |
| A13 | 2-9L0 00 001 | 1 | Loctite Cleaner 7063 | 450 ml |
| A14 | 2-9L0 00 006 | 1 | Loctite 221 | 50 ml |
| A15 | 2-806 05 090 | 1 | Omni Visc 1050 | 50 ml |
| 16 | 2-9L000005 | 1 | Loctite 638 | 250 ml |
Conversion: Newton-Meters to in. lb. and ft. lb.
| Nm | In. lb. | Ft. lb. |
|---|---|---|
| 5 | 44.2 | 3.6 |
| 10 | 88.5 | 7.3 |
| 15 | 132 | 11.0 |
| 20 | 177 | 14.7 |
| 25 | 221.2 | 18.4 |
| 30 | 265.5 | 22.1 |
| 35 | 309.7 | 25.8 |
| 40 | 354 | 29.5 |
| 45 | 398.2 | 33.1 |
| 50 | 442 | 36.8 |
| 55 | 486.7 | 40.5 |
| 60 | 531 | 44.2 |
Parts SRP 3860
The following sections detail the various parts of the Stanley SRP 3860 Compaction Reversible Plate, organized by component and including part numbers, quantities, and descriptions.
Base Plate Assembly
Diagram of the base plate assembly with numbered parts:
[Diagram of base plate assembly]
| Item # | Part # | Qty | Description |
|---|---|---|---|
| 1 | 75236 | 1 | Base Plate |
| 2 | 75701 | 2 | Socket Head Cap Screw |
| 3 | 75702 | 6 | Socket Head Cap Screw |
| 4 | 75525 | 8 | Lock Washer |
| 5 | 75211 | 1 | Oil Measuring Plug |
| 6 | 75453 | 1 | Joint Washer |
| 7 | 75671 | 1 | Locking Screw |
| 8 | 75456 | 1 | Joint Washer |
| 9 | 75441 | 1 | O-Ring |
| 10 | 75549 | 1 | Clip |
| 11 | 75550 | 1 | Plate |
| 12 | 75707 | 1 | Hexagon Head Cap Screw |
| 13 | 75466 | 4 | Rubber Buffer |
| 14 | 75755 | 4 | Hexagon Nut |
| 15 | 75528 | 8 | Conical Spring Washer |
| 16 | 75735 | 4 | Hexagon Head Cap Screw |
| 17 | 75264 | 1 | Vulkollan Plate |
| 18 | 75212 | 1 | Flat Steel |
| 19 | 75717 | 6 | Hexagon Head Cap Screw |
| 20 | 75528 | 6 | Conical Spring Washer |
| 21 | 75755 | 6 | Hexagon Nut |
| 22 | 75235 | 1 | Tightener Piece |
| 23 | 75739 | 2 | Hexagon Head Cap Screw |
| 24 | 75749 | 2 | Hexagon Nut |
| 25 | 75651 | 1 | Plug |
Complete Exciter Unit (P/N-75834)
Diagram of the complete exciter unit with numbered parts:
[Diagram of complete exciter unit]
| Item # | Part # | Qty | Description |
|---|---|---|---|
| 1 | 75237 | 1 | Exciter Housing |
| 2 | 75273 | 1 | Exciter Shaft |
| 3 | 75311 | 1 | Gear |
| 4 | 75272 | 1 | Adjusting Wheel |
| 5 | 75477 | 1 | Key, Hardened |
| 6 | 75506 | 1 | Retaining Ring |
| 7 | 75408 | 2 | Axial Bearing Washer |
| 8 | 75500 | 4 | Retaining Ring |
| 9 | 75538 | 1 | Cylindrical Pin |
| 10 | 75239 | 1 | Gear |
| 11 | 75478 | 1 | Key |
| 12 | 75430 | 3 | O-Ring |
| 13 | 75699 | 4 | Socket Head Cap Screw |
| 14 | 75523 | 4 | Lock Washer |
| 15 | 75753 | 1 | Hexagon Nut |
| 16 | 75398 | 2 | Groove Ball Bearing |
| 17 | 75491 | 1 | Retaining Ring |
| 18 | 75733 | 8 | Hexagon Head Cap Screw |
| 19 | 75522 | 8 | Lock Washer |
| 20 | 75309 | 1 | Bearing Cover |
| 21 | 75766 | 1 | Countersunk Screw |
| 22 | 75243 | 1 | Shift Cover, Assy. |
| 23 | 75244 | 1 | Shift Cover |
| 24 | 75561 | 1 | Sealing Plug |
| 25 | 75407 | 4 | Cylindrical Roller Bearing |
| 26 | 75487 | 1 | Retaining Ring |
| 27 | 75245 | 1 | Exciter Shaft |
| 28 | 75242 | 4 | Exciter Weight |
| 29 | 75241 | 1 | Piston |
| 30 | 75240 | 1 | Guide Piston |
| 31 | 75783 | 1 | Threaded Pin |
| 32 | 75431 | 1 | O-Ring |
| 33 | 75448 | 1 | Piston Packing |
| 34 | 75238 | 1 | Bearing Cover |
| 35 | 75418 | 1 | Shaft Sealing Ring |
| 36 | 75414 | 1 | Internal Ring |
| 37 | 75432 | 1 | O-Ring |
| 38 | 75444 | 1 | V-Ring |
| 39 | 75246 | 1 | V-Belt Pulley |
| 40 | 75480 | 1 | Key |
| 41 | 75497 | 1 | Retaining Ring |
| 42 | 75672 | 1 | Screw Plug |
| 43 | 75453 | 1 | Joint Washer |
Frame and Belt Guard Assembly
Diagram of the frame and belt guard assembly with numbered parts:
[Diagram of frame and belt guard assembly]
| Item # | Part # | Qty | Description |
|---|---|---|---|
| 1 | 75712 | 4 | Hexagonal Head Cap Screw |
| 2 | 75530 | 4 | Conical Spring Washer |
| 3 | 75631 | 1 | Petrol Engine |
| 4 | 75725 | 4 | Hexagonal Head Cap Screw |
| 5 | 75531 | 10 | Conical Spring Washer |
| 6 | 75254 | 1 | Panel |
| 7 | 75683 | 2 | Socket Head Cap Screw |
| 8 | 75219 | 1 | Fastener |
| 9 | 75247 | 1 | Upper Part |
| 10 | 75220 | 1 | Belt Guard |
| 11 | 75731 | 4 | Hexagonal Head Cap Screw |
| 12 | 75580 | 1 | Centrifugal Clutch |
| 13 | 75253 | 1 | Bush |
| 14 | 75695 | 1 | Socket Head Cap Screw |
| 15 | 75463 | 1 | V-Belt |
| 16 | 75248 | 1 | Belt Guard |
| 17 | 75250 | 1 | Belt Guard |
| 18 | 75255 | 1 | Hoop Guard |
| 19 | 75528 | 4 | Conical Spring Washer |
| 20 | 75736 | 2 | Hexagonal Head Cap Screw |
| 21 | 75738 | 2 | Hexagonal Head Cap Screw |
| 23 | 75222 | 1 | Distance Plate |
| 24 | 75482 | 1 | Key |
| 25 | 75521 | 10 | Lock Washer |
| 27 | 75681 | 4 | Socket Head Cap Screw |
| 28 | 75711 | 1 | Hexagonal Head Cap Screw |
| 29 | 75685 | 4 | Socket Head Cap Screw |
| 30 | 75634 | 1 | Fastener Bowden Control Cable |
| 31 | 75252 | 1 | Packing |
| 32 | 75728 | 4 | Hexagonal Head Cap Screw |
| 33 | 75433 | 7 | O-Ring |
Drive Assembly
Diagram of the drive assembly with numbered parts:
[Diagram of drive assembly]
| Item # | Part # | Qty | Description |
|---|---|---|---|
| 1 | 75704 | 3 | Threaded Pin |
| 2 | 75605 | 1 | V-Belt Pulley |
| 3 | 75607 | 1 | Housing |
| 4 | 75485 | 1 | Retaining Ring |
| 5 | 75497 | 1 | Retaining Ring |
| 6 | 75396 | 1 | Deep Groove Ball Bearing |
| 7 | 75501 | 1 | Retaining Ring |
| 8 | 75623 | 1 | Covering Disk |
| 9 | 75608 | 1 | Hub |
| 10 | 75624 | 1 | Covering Disk |
| 11 | 75504 | 1 | Retaining Ring |
| 12 | 75606 | 4 | Tension Spring |
| 13 | 75604 | 2 | Centrifugal Weight |
| 14 | 75609 | 2 | Lining Strap |
Control and Handle Assembly
Diagram of the control and handle assembly with numbered parts:
[Diagram of control and handle assembly]
| Item # | Part # | Qty | Description |
|---|---|---|---|
| 1 | 75734 | 2 | Hexagon Head Cap Screw |
| 2 | 75530 | 4 | Conical Spring Washer |
| 3 | 75251 | 2 | Drawbar Bearing |
| 4 | 75249 | 1 | Control Line, Cpl. |
| 5 | 75270 | 1 | Drawbar Profile |
| 7 | 75262 | 2 | Drawbar Grip |
| 8 | 75652 | 2 | Plug |
| 11 | 75715 | 2 | Hexagon Head Cap Screw |
| 12 | 75265 | 1 | Drawbar Support |
| 13 | 75234 | 1 | Control Valve, Assy. |
| 14 | 75726 | 8 | Hexagon Head Cap Screw |
| 15 | 75531 | 8 | Conical Spring Washer |
| 16 | 75422 | 2 | O-Ring |
| 17 | 75640 | 1 | Star Grip |
| 18 | 75223 | 1 | Threaded Bolt |
| 19 | 75645 | 1 | Speed Control, Cpl. |
| 20 | 75520 | 2 | Lock Washer |
| 21 | 75678 | 2 | Socket Head Cap Screw |
| 22 | 75473 | 1 | Rubber Buffer |
| 23 | 75740 | 2 | Hexagon Head Cap Screw |
| 24 | 75529 | 2 | Conical Spring Washer |
| 25 | 75261 | 1 | Panel Sheet |
| 26 | 75779 | 8 | Socket Button Screw |
| 27 | 75266 | 2 | Pipe |
| 28 | 75770 | 1 | Wing Nut |
| 29 | 75260 | 1 | Drawbar Console |
| 30 | 75391 | 4 | Rubber Buffer |
| 31 | 75530 | 4 | Conical Spring Washer |
| 32 | 75754 | 4 | Hexagon Nut |
| 33 | 75562 | 1 | Hollow Screw |
| 34 | 75453 | 2 | Joint Washer |
| 35 | 75547 | 1 | Rubber Bushing |
| 36 | 75686 | 1 | Socket Head Cap Screw |
| 37 | 75522 | 1 | Lock Washer |
| 38 | 75641 | 1 | Locking Bolt |
| 39 | 75750 | 1 | Hexagon Nut |
| 40 | 75752 | 2 | Hexagon Nut |
| 41 | 75307 | 1 | Rubber Plate |
Drawbar Assembly
Diagram of the drawbar assembly with numbered parts:
[Diagram of drawbar assembly]
| Item # | Part # | Qty | Description |
|---|---|---|---|
| 1 | 75256 | 1 | Drawbar valve |
| 2 | 75258 | 1 | Piston rod |
| 3 | 75232 | 1 | Pipe spring |
| 4 | 75705 | 1 | Threaded pin |
| 5 | 75445 | 1 | Guide ring |
| 6 | 75449 | 1 | Piston packing |
| 7 | 75410 | 1 | Bush |
| 8 | 75263 | 1 | Pinion shaft |
| 9 | 75259 | 2 | Bush |
| 10 | 75428 | 2 | O-Ring |
| 11 | 75423 | 2 | O-Ring |
| 12 | 75495 | 2 | Retaining ring |
| 13 | 75671 | 1 | Screw plug |
| 14 | 75454 | 1 | Joint washer |
| 15 | 75257 | 1 | Valve cover |
| 16 | 75423 | 1 | O-Ring |
| 17 | 75557 | 1 | Male stud standpipe |
| 18 | 75483 | 1 | Retaining ring |
| 19 | 75569 | 1 | Oil level indicator |
| 20 | 75459 | 1 | Joint washer |
Decals
The following table lists the decals used on the Stanley SRP 3860:
[Diagram showing decal locations]
| Item # | Part # | Qty | Description |
|---|---|---|---|
| 1 | 75103 | 1 | Decal (Hearing Protection) |
| 2 | 75099 | 1 | Decal (Sound Level) |
| 3 | 76508 | 1 | Decal (Front Panel w/Stanley Logo) |
| 4 | 74909 | 2 | Stanley Logo 11 in. L |
| 5 | 75091 | 1 | Decal (Engine Oil Drain Plug) |
| 6 | 75092 | 1 | Decal (Gearing-Unit Oil Drain Plug) |
| 7 | 75098 | 1 | Decal (Do Not Lift) |
| 8 | 75093 | 1 | Decal (Throttle) |
| 9 | 74906 | 2 | Model Decal SRP3860 |
| 10 | 75094 | 1 | Decal (Belt Tension) |
| 11 | 75095 | 1 | Decal (Belt Cover) |
Maintenance Kit
The following table lists the components included in the Stanley SRP Maintenance Kit:
[Diagram of maintenance kit components]
| Item # | Part # | Qty | Description |
|---|---|---|---|
| 1 | 75829 | 1 | Maintenance Kit |
| 2 | 75874 | 1 | Washer |
| 3 | 75573 | 1 | Air Filter |
| 4 | 75876 | 1 | Spark Plug |
| 5 | 75861 | 1 | Valve Cover Gasket |
| 6 | 75868 | 1 | Starter Rope |
| 7 | 75464 | 1 | V-Belt |
| 8 | 75453 | 1 | Joint Washer |
| 9 | 75456 | 1 | Joint Washer |
Wear Parts Kit, Rubber Buffer
The following table lists the parts included in the Stanley SRP Wear Parts Kit for the Rubber Buffer:
[Diagram of rubber buffer wear parts]
| Item # | Part # | Qty | Description |
|---|---|---|---|
| 1 | 75847 | 1 | Wear Parts Kit Rubber Buffer |
| 2 | 75755 | 4 | Hexagon Nut |
| 3 | 75528 | 8 | Conical Spring Washer |
| 4 | 75466 | 4 | Rubber Buffer |
| 5 | 75735 | 4 | Hexagon Head Cap Screw |
| 6 | 75391 | 4 | Rubber Buffer |
| 7 | 75530 | 4 | Conical Spring Washer |
| 8 | 75754 | 4 | Hexagon Nut |
| 9 | 75473 | 1 | Rubber Buffer |
Wear Parts Kit, Base Plate
The following table lists the parts included in the Stanley SRP Wear Parts Kit for the Base Plate:
[Diagram of base plate wear parts]
| Item # | Part # | Qty | Description |
|---|---|---|---|
| 1 | 75850 | 1 | Wear Parts Kit Base Plate |
| 2 | 75236 | 1 | Base Plate |
| 3 | 75671 | 1 | Screw Plug |
| 4 | 75456 | 1 | Joint Washer |
| 5 | 75211 | 1 | Oil Measuring Rod |
| 6 | 75453 | 1 | Joint Washer |
Wear Parts Kit, Piston
The following table lists the parts included in the Stanley SRP Wear Parts Kit for the Piston:
[Diagram of piston wear parts]
| Item # | Part # | Qty | Description |
|---|---|---|---|
| 1 | 75849 | 1 | Wear Parts Kit Piston |
| 2 | 75430 | 1 | O-Ring |
| 3 | 75448 | 1 | Piston Packing |
| 4 | 75431 | 1 | O-Ring |
| 5 | 75398 | 2 | Groove Ball Bearing |
| 6 | 75771 | 1 | Hexagon Nut |
Wear Parts Kit, Control Block
The following table lists the parts included in the Stanley SRP Wear Parts Kit for the Control Block:
[Diagram of control block wear parts]
| Item # | Part # | Qty | Description |
|---|---|---|---|
| 1 | 75848 | 1 | Wear Parts Kit Control Block |
| 2 | 75445 | 1 | Guide Ring |
| 3 | 75449 | 1 | Piston Packing |
| 4 | 75410 | 1 | Bush |
| 5 | 75428 | 2 | O-Ring |
| 6 | 75423 | 2 | O-Ring |
| 7 | 75454 | 1 | Joint Washer |
| 8 | 75423 | 1 | O-Ring |
Repair Kit Exciter
The following table lists the parts included in the Stanley SRP Repair Kit for the Exciter:
[Diagram of exciter repair kit parts]
| Item # | Part # | Qty | Description |
|---|---|---|---|
| 1 | 75799 | 1 | Repair Kit Exciter |
| 2 | 75430 | 3 | O-Ring |
| 3 | 75444 | 1 | V-Ring |
| 4 | 75418 | 1 | Shaft Sealing Ring |
| 5 | 75407 | 4 | Cylindrical Roller Bearing |
| 6 | 75432 | 1 | O-Ring |
| 7 | 75414 | 1 | Internal Ring |
| 8 | 75453 | 1 | Joint Washer |
| 9 | 75441 | 1 | O-Ring |
Notes
This section is reserved for additional notes and observations.
Related Documents
 |
Stanley SRP 4960 Compaction Reversible Plate Parts Manual Comprehensive parts manual for the Stanley SRP 4960 Compaction Reversible Plate, detailing all components, part numbers, quantities, and assembly kits. Includes technical specifications, adhesive torque conversions, and maintenance information. |
 |
Stanley CH18 Hydraulic Chipping Hammer User Manual: Safety, Operation, Maintenance Comprehensive user manual for the Stanley CH18 Hydraulic Chipping Hammer. Covers detailed safety precautions, operating procedures, maintenance guidelines, troubleshooting, specifications, and parts lists. Essential guide for safe and effective use of this professional hydraulic tool. |
 |
Stanley CH18 Hydraulic Chipping Hammer User Manual: Safety, Operation, and Maintenance Comprehensive user manual for the Stanley CH18 Hydraulic Chipping Hammer, covering safety precautions, operating procedures, maintenance guidelines, troubleshooting, and specifications. Essential reading for safe and effective use. |
 |
Stanley CH18 Hydraulic Chipping Hammer User Manual: Safety, Operation, and Maintenance Comprehensive user manual for the Stanley CH18 Hydraulic Chipping Hammer, covering safety precautions, operating procedures, troubleshooting, tool protection, specifications, and parts lists. Includes guidance on hose types and underwater use. |
 |
Stanley CH18 Chipping Hammer: Specifications & Features | Hydraulic Tool Explore the Stanley CH18 Chipping Hammer, a powerful and compact hydraulic tool. View specifications, features, accessories, and warranty information for this industrial-grade chipping hammer. |
 |
Stanley RD12 Hydraulic Rail Drill User Manual Comprehensive user manual for the Stanley RD12 Hydraulic Rail Drill, covering safety, operation, maintenance, troubleshooting, and specifications. Includes detailed information on hose types, hydraulic system requirements, and a parts list. |
 |
Stanley CH18 Chipping Hammer Specifications and Features Detailed specifications, features, benefits, accessories, and warranty information for the Stanley CH18 Chipping Hammer. |
 |
Stanley CH18 Chipping Hammer - Specifications, Accessories, and Warranty Detailed specifications, available accessories, and warranty information for the Stanley CH18 hydraulic chipping hammer. Learn about its features, performance, and ordering options. |