Product Overview
The Stanley CH18 Chipping Hammer is a light yet powerful tool designed as an alternative to air-powered chipping hammers. It features a "D" handle for operator comfort, with both the handle and tool holder end being shock and heat insulated. The tool is compact, making it suitable for confined working conditions, and accepts standard 0.580-inch round collar steels.
Image Description: A side view of the Stanley CH18 Chipping Hammer, showing its "D" handle, the tool holder, and two flexible hoses connected to the top. The tool has a metallic finish with black insulated grips.
Specifications
| ITEM | U.S.A. | METRIC |
|---|---|---|
| Capacity | 2 1/2 in Shank x 0.580 in Hex | 63 mm Shank x 15 mm Hex |
| Weight | 24 lb | 11 kg |
| Length | 20 in | 51 cm |
| Width | 3 in | 8cm |
| Pressure | 1500-2000 psi | 105-140 bar |
| Flow Range | 7-9 gpm | 26-34 lpm |
| Optimum Flow | 8 gpm | 30 lpm |
| Porting | 6 SAE O-Ring | |
| Hose Whips | Yes | |
| Connect Size and Type | 3/8 in Male Pipe Hose End |
Features and Benefits
- Lightweight yet powerful alternative to air-powered tools.
- "D" handle design for operator comfort.
- Shock and heat insulated handle and tool holder end.
- Compact design for confined working conditions.
- Accepts standard 0.580-inch round collar steels.
Underwater models are available. Refer to ordering information.
Accessories
| PART NO. | DESCRIPTION |
|---|---|
| 02277 | Bushing Tool Bit 9-Tooth |
| 02278 | Flat Chisel Bit 1 x 18 in/2.5 x 45.7 cm |
| 02279 | Bull Point 1 x 18 in/2.5 x 47.5 cm |
| 03690 | Chisel Bit 1 x 9 in/2.5 x 22.9 cm |
| 03963 | Scaling Chisel 2 x 9 in/5 x 22.9 cm |
Ordering Information
| PART NO. | SYSTEM |
|---|---|
| CH18111 | Open Center |
| CH18311 | Open Center (Underwater Model) |
Warranty
Stanley Hydraulic Tools and their associated parts are warranted against defects in materials and workmanship for a period of twelve months from the date of purchase. Stanley Hydraulic Tools reserves the right to repair or replace only those parts which prove to have been defective at the time of purchase. This warranty becomes void if maximum flow and pressure ratings are exceeded.
All Stanley Hydraulic Tools, Parts, Accessories and allied equipment are subject to design improvements, specification and price changes at any time without notice and with no obligation to units already sold. Weights, dimensions and operating specifications listed herein are subject to change without notice. Where specifications are critical to your application, please consult Stanley Hydraulic Tools.
Contact Information
Call the Stanley Hydraulic Tools dealer nearest you...
Stanley Hydraulic Tools
3810 SE Naef Road
Milwaukie, OR 97267-5698
Tel: 503-659-5660
Fax: 503-652-1780
