DiO 1.0 Flush-Mount Switch Module
User and Installation Guide
Introduction
This document provides essential information for the installation and operation of the DiO 1.0 flush-mount switch module. It is designed to integrate seamlessly into home automation systems, offering reliable control for various electrical devices.
Module Overview and Wiring
The DiO 1.0 module is a compact unit designed for discreet installation. It features input terminals for power connection and output terminals to control a connected load.
Wiring Diagram Description
The module requires a power supply of 12-24V AC or DC. The diagram illustrates the following connections:
- Power Input (IN): Connect the positive (+) and negative (-) terminals of a 12-24V AC/DC adapter to the 'IN' terminals on the module.
- Load Output (OUT): Connect the wires of the device or load you wish to control to the 'OUT' terminals on the module. The module will switch power to this load based on control signals.
Installation and Usage
Installation Precautions
[Warning Symbol] Safety First: Always ensure that the main power supply is completely disconnected before commencing any wiring or installation work. Incorrect connections can lead to damage to the module, the connected equipment, or pose a safety hazard.
Follow the provided wiring diagram meticulously to ensure correct polarity and connections.
Initial Setup (Commissioning)
Once wiring is complete and verified, restore power to the module. The DiO 1.0 module will initialize and be ready for configuration or pairing with compatible DiO remote controls or smart home hubs.
General Usage Guidelines
The module is intended for controlling lights, motors, or other electrical loads within its specified power limits. Refer to the technical specifications for details.
Technical Specifications
The following table outlines the key technical specifications for the DiO 1.0 flush-mount switch module:
| Specification | Details |
|---|---|
| Input Voltage | 12-24V AC/DC |
| Output Control | Switched Load (AC/DC) |
| System Compatibility | DiO Wireless Protocol |
| Mounting Type | Flush-mount |
Troubleshooting
Should the module fail to operate as expected, please perform the following checks:
- Power Supply: Verify that the 12-24V AC/DC adapter is functioning correctly and providing stable power.
- Wiring: Double-check all connections to ensure they are secure and correctly placed according to the wiring diagram. Pay close attention to polarity for DC connections.
- Pairing: If the module is unresponsive to remote commands, ensure it has been successfully paired with the DiO control system. Consult the DiO system's manual for pairing procedures.
Warranty Information
For detailed information regarding the product warranty, including coverage periods and terms, please refer to the warranty documentation provided by DiO or consult the official DiO website.
