DiO 54736 On/Off Lighting Module and Wireless Switch Installation Guide

Product Overview

The DiO 54736 kit includes an On/Off lighting module (54855) and a wireless switch (54715). These devices allow you to remotely control your lighting, offering convenience and energy efficiency. They are compatible with the DiO 1.0 system and can be controlled via a smartphone when paired with a DiO hub.

Key Components:

• DiO 54855 On/Off Lighting Module
• DiO 54715 Wireless Switch
• 1x CR2032 3V Lithium Battery (included)
• 1x Manual

Warranty Registration

To register your warranty, please complete the online form at www.getDiO.com/warranty.

Video Tutorials

For easier understanding and installation, video tutorials are available. Watch them on the DiO YouTube channel (Youtube.com/c/dio-connected-home) or visit the support section on the DiO website (www.getDiO.com).

1. Installing the Lighting Module

!! Warning !! Disconnect the power supply before carrying out any work. If you have any doubts about your installation, please consult your electrician.

You can use non-dimmable incandescent, halogen, LED, or ECO bulbs with this module.

Connecting the Module to Your Lighting

This process involves wiring the module between your power source and the light fixture.

1. Switch off the power supply.
2. Remove the 230V AC live and neutral wires connected to your existing light.
3. Connect the module to the power supply: connect the 230V AC live wire (typically brown/red) to terminal 'L' on the module, and the neutral wire (typically blue) to terminal 'N' on the outside of the module.
4. Connect the module to the light fixture: connect the live wire going to the light (typically brown/red) to terminal 'Lâ' on the module, and the neutral wire (typically blue) to terminal 'N' on the inside of the module.
5. Tighten the screws for all 4 terminals securely.
6. Reconnect the power supply.

Installing the Wireless Switch

This section describes how to mount the wireless switch.

1. Remove the front panel of the switch to ensure the battery is correctly inserted and to access the wall-mounting screws.
2. Attach the base of the switch to the wall using the provided screws or double-sided stickers.
3. Attach the front panel to the base. Ensure the correct orientation, noting the "UP" indicator (marked as 'á' in diagrams).

2. Linking the Module with a DiO 1.0 Device

This product is compatible with all DiO 1.0 devices, including remote controls, wireless switches, detectors, and the DiO Smart Home hub for smartphone control.

Using the DiO hub, you can control your home from anywhere via your smartphone and make your DiO 1.0 module compatible with DiO 2.0 devices. For more information, visit www.getDiO.com.

2.1 Linking the Module with a Remote Control, Switch, or Detector

Follow these steps to pair your module with a DiO 1.0 control device.

1. Connect your lighting module to the power supply.
2. Bring the DiO 1.0 switch (or other control device) close to the module. Press the module's learning button once. The module's LED will begin to flash slowly.
3. Within 12 seconds, press the 'I' (ON) button on the wireless switch or remote control.
4. The module's LED will flash twice to confirm the successful link and then turn off.

Warning: If you do not press the 'ON' button of the device within 12 seconds, the module will exit learning mode. You must restart the procedure to link the device with the module.

The module can be linked with up to 32 different DiO devices. If the memory is full, adding the 33rd device will automatically delete the 1st device added.

2.2 Linking the Module to the DiO Hub

Link your lighting module to your DiO Smart Home hub unit to control your lighting with your smartphone. This allows you to create custom scenarios, such as turning lights on/off at specific times or simulating presence when you are away. Refer to your hub's manual for instructions on adding the module.

3. Deleting a DiO 1.0 Device

If you wish to remove a previously linked device:

1. Bring the device you want to delete close to the module. Press the module's learning button; the LED will begin to flash slowly.
2. Within 12 seconds, press the 'OFF' ('O') button on the device you wish to delete. The module's LED will flash twice to confirm the deletion.

4. Resetting the Module

To delete all registered devices and restore the module to its factory settings:

1. Press and hold the module's learning button for 6 seconds. The LED will start to flash continuously.
2. Release the button and then press it again briefly.

5. Usage

On/Off Function: Press the 'I' button once to turn the connected light on, or press the 'O' button once to turn it off.

The module can be controlled individually or in conjunction with other DiO receivers. For example, a DiO switch could close a shutter linked to a DiO module and simultaneously turn on a lamp connected to this lighting module. A DiO remote control can turn the lamp on and off individually.

6. Troubleshooting

The lighting does not come on when pressing the remote control or switch, or when the detector is activated:

• Check that the module has been installed correctly and is properly connected to the power supply.
• Verify the polarity of the battery(ies) in the control device and ensure they are not depleted.
• Make sure that the control device is successfully linked to the module.

Important Notes:

• A minimum distance of 1-2 meters is necessary between two DiO receivers (module, socket, and/or bulb) to ensure optimal performance.
• The transmission range between the module and the DiO control device may be reduced by the thickness of walls or the presence of existing wireless interference.

Warning: Do not use in a damp location.

8. Supplementing Your Installation

Expand your smart home system with DiO solutions to control heating, lighting, roller blinds, garden features, or monitor your home with video surveillance. DiO Connected Home solutions are user-friendly, high-quality, scalable, and economical. Discover the full range at www.getDiO.com.

Usage Note: For indoor use only (IP20). Do not use in a damp environment.

The module features an electronic on/off micro-switch.

Recycling and Conformity

Recycling: In accordance with European WEEE directives (2002/96/EC) and accumulator directives (2006/66/EC), electrical and electronic devices or accumulators must be collected separately by a specialized local waste collection system. Do not dispose of these products with ordinary household waste. Please consult the regulations in force. The crossed-out waste bin symbol indicates that this product must not be disposed of with household waste in any EU country. To prevent risks to the environment or human health from uncontrolled disposal, recycle the product responsibly to promote the sustainable use of material resources. To return your used device, use the return and collection systems or contact your original dealer for recycling in accordance with regulatory provisions.

Conformity: CHACON declares that devices 54855 and 54715 conform with the requirements and provisions of Directive RED 2014/53/EU. The complete text of the EU declaration of conformity is available at: www.chacon.be (Support section).