ICY DOCK ToughArmor MB833M2K-B / MB834M2K-B Series
Rugged Single/Dual M.2 NVMe SSD Mobile Rack for 3.5" Bay
Brand: ICY DOCK
Model Numbers: MB833M2K-B, MB833MK-B V2, MB834M2K-B, MB834MK-B V2
Package Contents
The package includes the following items:
- MB833M2K-B / MB833MK-B V2: 1 unit
- MB834M2K-B / MB834MK-B V2: 2 units
- User Manual: 2 copies
- Keys: 2
- Screws for Device: 4 x M3*4 Pan Head Screws
- Thermal Pads: 6
- Spare Screws: 2 x M3*4 Pan Head Screws
Note: Please use the included screws to secure the device.
Device Information
Front View
MB833M2K-B / MB833MK-B V2:
- 2-segment Keylock
- Drive Tray Ejection Button
- LED Indicator (Drive Power: Solid Green; Drive Access: Flashing Green)
MB834M2K-B / MB834MK-B V2:
- 2-segment Keylock
- Drive Tray Ejection Button
- LED Indicator (Drive Power: Solid Green; Drive Access: Flashing Green)
Rear View
MB833M2K-B / MB834M2K-B:
- 1 x Mini-SAS HD Connector
- 1 x 15 Pin Power Connector
MB833MK-B V2 / MB834MK-B V2:
- 1 x SlimSAS 4i Connector
- 1 x 15 Pin Power Connector
Tray Inner View
- 1 x Adjustable M.2 SSD Locker
- 2 x Heat Sink Secure Points
- 3 x M.2 SSD Lock Points (Supports 22110/2280/2260/2242/2230 form factors)
Installation Guide
Step 1: Prepare the Drive Tray
The metal heat sink needs to be removed before M.2 SSD installation. To remove, simply push the heat sink upward from the rear underside of the drive tray [Push Upward].
Step 2: Install M.2 SSD
With the M.2 SSD laying flat on the tray, align the gap on the connector of the M.2 SSD to the drive tray's slot divider to prevent incorrect insertion. Then, insert the M.2 SSD towards the connector slot. Slide the adjustable locker to secure the M.2 SSD.
Step 3: Apply Thermal Pads and Heat Sink
Optional: Remove the clear protective films from the small thermal pads and place them on lower flash memory chip(s) to fill the surface gap between the chips and the larger thermal pad for optimal heat transfer. Skip this step if memory chips are at the same height.
Remove the protective films from the larger thermal pad and place it onto the heat sink cover.
Place the removed heat sink cover back on the tray. Press down both sides of the heat sink cover to secure.
Step 4: Install Device into 3.5" Bay
For MB833M2K-B / MB834M2K-B models, use a small plier to remove the cover on the Mini-SAS HD ports.
Secure the device into the external 3.5" bay using the included M3*4 screws.
Connect the power cable and the Mini-SAS HD/SlimSAS cable(s). For dual bay devices, connect both ports. For single bay devices, only one port needs to be connected.
Important Notes
ICY DOCK reserves the right to change product specifications, components, or accessories without prior notice.
For warranty information, please visit www.icydock.com/warranty.php.
