Jabra BT2045 User Manual

Thank You

Thank you for purchasing the Jabra BT2045 headset. We hope you enjoy it! This instruction manual will get you started and ready to make the most of your headset.

About Your Jabra BT2045

A line drawing of the Jabra BT2045 headset. Part A is labeled as the Answer/end button, on/off button. Part B is labeled as the LED light. Part C is labeled as the Charging socket. Part D is labeled as the Earhook.

• A Answer/end button, on/off button
• B LED light
• C Charging socket
• D Earhook

What Your Headset Can Do

Your Jabra BT2045 lets you do all this:

• Answer calls
• End calls
• Reject calls*
• Voice dialing*
• Last number redialing*
• Call waiting*
• Place call on hold*

* Phone dependent

Specifications

• Talk time up to 8 hours / standby time up to 10 days
• Rechargeable battery with charging option from AC power supply, USB cable or car charger (USB cable and car charger not included)
• Weight 10 grams
• Operating range up to 10 meters (approx. 33 feet)
• Headset and hands-free profiles (see glossary)
• [Bluetooth logo] version 2.1 + eSCO & EDR

Getting Started

You should follow three steps before using your headset:

1. Charge your headset
2. Activate [Bluetooth logo] on your mobile phone (refer to the manual for your Mobile phone)
3. Pair your headset to your mobile phone

The Jabra BT2045 is easy to operate. The answer/end button on the headset performs different functions depending on how long you press it.

Charge Your Headset

Make sure that your headset is fully charged for 2 hours before you start using it. Use the AC power supply to charge from a power socket. When the light indicator (LED) has a solid LED light, your headset is charging. When the solid LED light turns off, it is fully charged.

Illustration showing the Jabra BT2045 headset connected to a power source via its charging socket, with text indicating a 2-hour charging time.

Use only the charger provided in the box - do not use chargers from any other devices as this may damage your headset.

Please note: The lifetime of the battery will be significantly reduced if your device is left uncharged for a long period. We therefore recommend that you recharge your device at least once a month.

Turning Your Headset On and Off

Two illustrations of the Jabra BT2045 headset. The first indicates turning the headset ON by pressing the answer/end button for approximately 2 seconds ('2 Sec-On'). The second indicates turning the headset OFF by pressing the answer/end button for approximately 5 seconds ('5 Sec-Off').

• Press the answer/end button until you see a burst of flashes on the indicator light (LED) to turn on your headset.
• Long press the answer/end button until you see a burst of flashes on the indicator light (LED) to turn the headset off.

Pairing It With Your Phone

Headsets are connected to phones using a procedure called 'pairing'. By following a few simple steps, a phone can be paired with a headset in a matter of minutes.

1. Put the headset in pairing mode

When you turn on your Jabra BT2045 for the first time, the headset will automatically start up in pairing mode – i.e. it is discoverable for your phone. When the headset is in pairing mode the LED is constantly lit.

2. Set your phone to 'discover' the Jabra BT2045

Follow your phone's instruction guide. First make sure that [Bluetooth logo] is activated on your mobile phone. Then set your phone to discover the headset. This usually involves going to a 'setup', 'connect' or '[Bluetooth logo]' menu on your phone and selecting the option to 'discover' or 'add' a device.*

3. Your phone will find the Jabra BT2045

Your phone will find the headset under name "BT2045". Your phone then asks if you want to pair with the headset. Accept by pressing 'Yes' or 'OK' on the phone and confirm with the passkey or PIN = 0000 (4 zeros) if asked. Your phone will confirm when pairing is complete.

Simulated mobile phone screens illustrating the pairing process: 1. A 'CONNECTIVITY' screen showing Bluetooth options. 2. A 'DEVICES FOUND' screen listing 'Bluetooth Headset'. 3. A screen prompting for 'Passkey: ****'. 4. A final 'HANDSFREE' screen confirming 'Bluetooth Headset is now ready for use'.

Note: Please note that the LED indicator light turns off after 1 minute to save battery. Headset is still active, and light will flash again after tap on the Answer/End button or any call activity. To check if the headset is on, tap the answer/end button once – the LED indicator light will flash, if the headset is on.

Manual Pairing

In case of unsuccessful pairing, put the Jabra BT2045 into pairing mode manually. Make sure the headset is off. Press and hold the answer/end button for approximately 5 seconds until the LED has a constant light. The LED will flash before the light is constant – keep holding down the button until light is constant. Then follow steps 2 and 3 above.

Wear It How You Like It

The Jabra BT2045 is designed to wear with an earhook but it can also be worn without the earhook by simply inserting it in your right or left ear. If you prefer to use the earhook, click it on as shown on the illustration.

Illustrations demonstrating how to attach the earhook to the Jabra BT2045 headset, showing it can be fitted for either the right or left ear.

For optimal performance, wear the Jabra BT2045 and your mobile phone on the same side of your body or within line of sight. In general, you will get better performance when there are no obstructions between your headset and your mobile phone.

How To

Answer a call

Tap the answer/end button on your headset to answer a call.

End a call

Tap the answer/end button to end an active call.

Make a call

When you make a call from your mobile phone, the call will (subject to phone settings) automatically transfer to your headset. If your phone does not support this function, tap on the answer/end button on the Jabra BT2045 to receive the call in the headset.

Reject a call*

Press the answer/end button when the phone rings to reject an in-coming call. Depending on your phone settings, the person who called you will either be forwarded to your voice mail or hear a busy signal.

Activate voice dialing*

Press the answer/end button. For best results, record the voice-dialing tag through your headset if your phone allows you to do so. Please consult your phone's user manual for more information about using this feature.

Redial last number*

Double tap the answer/end button.

Call waiting and placing a call on hold*

This lets you put a call on hold during a conversation and answer a waiting call.

• Press the answer/end button once to put the active call on hold and answer the waiting call.
• Press the answer/end button to switch between the two calls.
• Tap the answer/end button once to end the first call and accept the new incoming call.

* Functions marked with * are dependent on your phone supporting these features. Check your phone's user manual for further information.

What The Lights Mean

* BT2045 is equipped with Jabra Discreet Light feature, meaning that light indicator (LED) turns off after 1 min of non-activity. Headset is still active, and light will flash again after a tap on the answer/end button or any call activity.

Using Jabra BT2045 With Two Mobile Phones

Jabra BT2045 is capable of having two mobile phones (or [Bluetooth logo] devices) connected to the headset at the same time. This will give you the freedom of having only one headset to operate both your mobile phones.

In order to use the headset with two mobile phones, please make sure you have "paired" the Jabra BT2045 with both phones. See the section "Pairing It With Your Phone" for instructions.

Once you have "paired" your headset with two phones, simply make sure your headset is on, and that [Bluetooth logo] is enabled on the phones, and the headset will then automatically connect to both phones.

Please note that Last Number Redial will dial the number from the last outgoing call, independent of the mobile phone, and the Voice Dialing function will only work on the last paired mobile phone.

Troubleshooting & FAQ

I hear crackling noises

For the best audio quality, always wear your headset on the same side of the body as your mobile phone.

I cannot hear anything in my headset

• Increase the volume on your phone.
• Ensure that the headset is paired with the phone.
• Make sure that the phone is connected to the headset – if it does not connect either from the phone's menu or by tapping the answer/end button, follow the pairing procedure (refer to pairing section in this user manual).
• You can determine whether your headset is connected to a device by looking at the flashes on the headset after tapping the answer/end button when the headset is on: very slow single flashes means that the headset is connected to a device, slow triple flashes means that the headset is currently not connected.

I have connection problems

• You may have deleted your headset pairing connection in your mobile phone. Follow the pairing instructions (refer to the section in this user manual).
• You can determine whether your headset is connected to a device by looking at the flashes on the headset after tapping the answer/end button when the headset is on: very slow single flashes means that the headset is connected to a device, slow triple flashes means that the headset is currently not connected.

Will the Jabra BT2045 work with other equipment?

The Jabra BT2045 is designed to work with mobile phones. It can also work with other devices that are compliant with [Bluetooth logo] version 1.1, 1.2, 2.0 or 2.1 and support a headset and/or hands-free profile.

I cannot use Reject call, Call on hold, Redial or Voice dialing

These functions are dependent on your phone supporting them. Please check your phone's manual for further details.

Need More Help?

1. Web: www.jabra.com (for the latest support info and online User Manuals)
2. E-mail:
   • Information: info@jabra.com
   • Deutsch: support.de@jabra.com
   • English: support.uk@jabra.com
   • Español: support.es@jabra.com
   • Français: support.fr@jabra.com
   • Italiano: support.it@jabra.com
   • Nederlands: support.nl@jabra.com
   • Polska: support.pl@jabra.com
   • Scandinavian: support.no@jabra.com
   • Россия: support.ru@jabra.com
3. Phone:
   • Belgique/Belgie: 00800 722 52272
   • Danmark: 70 25 22 72
   • Deutschland: 0800 1826756
   • Die Schweiz: 00800 722 52272
   • España: 900 984572
   • France: 0800 900325
   • Italia: 800 786532
   • Luxembourg: 00800 722 52272
   • Nederland: 0800 0223039
   • Norge: 800 61272
   • Österreich: 00800 722 52272
   • Polska: 0801 800 550
   • Portugal: 00800 722 52272
   • Suomi: 00800 722 52272
   • Sverige: 020792522
   • United Kingdom: 08000327026
   • Россия: +7 916 246 69 00
   • International: 00800 722 52272

Taking Care of Your Headset

• Always store the Jabra BT2045 with the power off and safely protected.
• Avoid storage at extreme temperatures (above 45°C/113°F – including direct sunlight – or below -10°C/14°F). This can shorten battery life and may affect operation. High temperatures may also degrade performance.
• Do not expose the Jabra BT2045 to rain or other liquids.

Glossary

1. [Bluetooth logo]: [Bluetooth logo] is a radio technology that connects devices, such as mobile phones and headsets, without wires or cords over a short distance (approx. 10 meters/33 feet). It is safe to use. It is secure too, so once a connection has been made no-one can listen in and there is no interference from other devices either. Get more information at www.bluetooth.com.
2. [Bluetooth logo] profiles: are the different ways that devices communicate with other devices. Phones support the headset profile, the hands-free profile or both. In order to support a certain profile, a phone manufacturer must implement certain mandatory features within the phone's software.
3. Pairing: creates a unique and encrypted link between two [Bluetooth logo] devices and lets them communicate with each other. [Bluetooth logo] devices will not work if the devices have not been paired.
4. Passkey or PIN: is a code that you enter on your [Bluetooth logo] enabled device (e.g. a mobile phone) to pair it with your Jabra BT2045. This makes your [Bluetooth logo] device and the Jabra BT2045 recognize each other and automatically work together.
5. Standby mode: is when the Jabra BT2045 is passively waiting for a call. When you 'end' a call on your mobile phone, the headset goes into standby mode.

[Disposal icon] Dispose of the product according to local standards and regulations.

www.jabra.com/weee