BTicino Smarther Smart Thermostat

Installation

⚠️ Caution: Keep the unique Apple HomeKit installation code safe. It will be required during the iOS mobile app installation.

Recommended Installation Height: 160 cm (unless different regulations are specified).

Installation with Different Boxes

• With 503E boxes
• With 500 boxes
• With 502PB boxes

Caution: Avoid overtightening screws to prevent base distortion that could compromise correct device installation. The front must securely attach to the base, and the fastening clip should lock into place. After installation, wait 2 hours before checking the read temperature.

Device Overview and Features

Interface Description

The device features a touch screen display showing temperature and humidity. Indicators include:

• 3. "Boost" mode indicator
• 4. Wi-Fi connection key
• 5. Keys for temperature setting
• 6. Boost mode activation
• 7. Reset key (keep pressed for 10", restores factory settings)
• 8. Manual mode indicator
• 9. ON heating indicator
• 10. ON cooling indicator
• 11. "OFF thermostat" indicator; displays temperature (frost guard) in heating function, or OFF in cooling function.
• 12. Wi-Fi connection indicator
• 13. Connection clamps (see diagrams)

The device has a touch screen display (1) for temperature/humidity (2). It includes indicators for Boost mode (3), Wi-Fi connection (12), manual mode (8), heating status (9), cooling status (10), and thermostat off status (11). Buttons are available for Wi-Fi connection (4), temperature setting (5), and Boost mode activation (6). A reset key (7) is also present.

Available Features

• Management via Home + Control App
• Display and change temperature
• Boost mode
• Room humidity display
• Compatibility with Netatmo Additional Smart Radiator Valve
• Compatibility with Google Assistant
• Compatibility with Alexa
• Compatibility with HomeKit

Wiring Diagrams

⚠️ Warning: During power shortage, the device is not working and not reachable, and any collection of personal data is stopped.

System Configurations:

• Heating Only with Clean Contact: For systems requiring a clean contact signal (e.g., boiler agreement).
• Heating Only with Mains Voltage Load: For systems controlling a load at mains voltage (e.g., 230Vac solenoid valve).
• Heating and Cooling with Floor System: For integrated floor heating and cooling systems.
• Heating and Cooling with Different Systems: For controlling separate heating and cooling systems.

Important: An external changeover switch must be correctly activated when the system function switches between heating and cooling.

Technical Data

Wireless Device: Complies with standard 802.11b/g/n, frequency 2.4-2.4835 GHz, transmission power < 20 dBm. Security protocols: WEP/WPA/WPA2. Protocol: IPv4.

Radio Link: Short-range communication, frequency 868MHz/915MHz, transmission power < 25mW e.r.p.

Warnings and Consumer Rights

Read carefully before use and keep for future reference.

General Prohibitions:

• Do not touch units with wet hands.
• Do not use liquid cleaners or aerosols.
• Do not block ventilation openings.
• Do not modify devices.
• Do not remove protective parts.
• Do not expose the unit to dripping or splashing water.
• Do not install near heat/cold sources or air emission points.
• Do not install near harmful gases and powders.
• Do not fasten units on unsuitable surfaces.

Electrical Safety:

• ⚠️ Danger of electrical shock.
• ⚠️ Risk of devices falling because the surface on which they are installed collapses or inappropriate installation.
• Switch off power supply before any system work.
• Remote operation may cause damage to people or property.

Installation and Maintenance:

• Installation, configuration, start-up, and maintenance must be performed exclusively by qualified personnel.
• Check that the wall installation has been carried out correctly according to the installation instructions.
• Check that the unit installation complies with the standards in force.
• Connect the power supply wires as indicated.
• Use only the items indicated in the technical specifications for any system expansions.

For device configuration, installation, and further information, refer to documentation downloadable from the website.

App Integration:

Download the "Home + Control" application from the Apple Store or Google Play.

System Requirements:

• Android: Requires Android 5.0 or later with Google Play access.
• iOS: Requires iPhone, iPad, or iPod touch with iOS 12.0 or later.

This device includes Open Source software; consult the technical sheet for license information.

HomeKit Compatibility:

To control this HomeKit-enabled accessory automatically and remotely, a HomePod, Apple TV, or iPad set up as a home hub is required. Ensure software and operating systems are updated.

Apple HomeKit technology provides an easy and secure way to control your home's thermostats from your iPhone, iPad, Apple Watch, HomePod, or Mac using the Apple Home app. Control your HomeKit-enabled accessories with your voice by asking Siri directly from your iPhone, iPad, Apple Watch, HomePod, or Mac.

Use of the "Works with Apple" badge means that an accessory has been designed to work specifically with the technology identified in the badge and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.

Compliance and Legal Notices

EU Declaration of Conformity: BTicino S.p.A. declares that the radio equipment type Smarther with Netatmo (art. SXG8002/SXM8002/SXW8002) is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.bticino.it/red

Trademarks:

• ©2019 Apple Inc. Apple, the Apple logo, Apple TV, Apple Watch, HomeKit, iPad, iPhone, Mac, and Siri are trademarks of Apple Inc., registered in the U.S. and other countries. HomePod, iPadOS, Multi-Touch, and tvOS are trademarks of Apple Inc. App Store, iCloud, and iTunes Store are service marks of Apple Inc., registered in the U.S. and other countries. iOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license.
• Android, Google, Google Play, and related marks and logos are trademarks of Google LLC.
• Other product and company names mentioned herein may be trademarks of their respective companies.