BTicino YW4575CWG/YD4575CWG/YG4575CWG: Wireless 4 Scenarios Control

Product Overview

This document provides information for the BTicino wireless 4 scenarios control devices, models YW4575CWG, YD4575CWG, and YG4575CWG. These devices are designed for smart home automation, allowing users to control various scenarios wirelessly.

Product Components

The device features several key components for installation and operation:

• 1. Fixing holes (centre distance 83.5 mm): Points for securing the device to a mounting surface.
• 2. Cut-out for frame transformation (3 to 2 modules): A pre-scored area allowing the frame to be adapted from a 3-module to a 2-module configuration.
• 3. Fixing holes (centre distance 60 mm): Additional points for securing the device, often used in specific configurations.
• 4. Control pushbutton: The primary button for interacting with the device or triggering scenarios.
• 5. Adhesive positioning area: A designated space for applying stickers or labels.
• 6. Factory reset pushbutton: A button to restore the device to its default factory settings. This requires pressing and holding for 7 seconds.

The device can be configured for both 3-module and 2-module setups, and supports both wall mounting and flush mounting installations. Removable adhesive stickers are also a feature for positioning.

Configuration and Installation

For detailed configuration and installation instructions, as well as any other information, users should refer to the dedicated mobile application or the documentation available for download from the website.

App Requirements:

• Android: Requires Android 5.0 or later with access to Google Play.
• iOS: Requires an iPhone with iOS 12.0 or later.

Website: www.homesystems-legrandgroup.com

Download the app from the Google Play store or the App Store.

Technical Features

Warnings and Consumer Rights

Please read the following warnings carefully before use and keep this document for future reference.

Safety Precautions:

• Do not touch the units with wet hands.
• Do not use liquid cleaners or aerosols.
• Do not block ventilation openings.
• Do not modify the devices.
• Do not remove protective parts from the devices.
• Do not expose the unit to water drops or splashes.
• Install the units away from heat/cold sources, harmful gases, and dust.
• Fasten the units on suitable surfaces only.

Electrical Hazards:

• Danger of electrical shock.
• Risk of devices falling due to surface collapse or inappropriate installation.
• Always switch off the power supply before performing any work on the system.
• Remote operation may cause damage to people or property.

Installation and Maintenance:

• Installation, configuration, starting-up, and maintenance must be performed exclusively by qualified personnel.
• Ensure wall installation is carried out correctly according to instructions.
• Verify that the unit installation complies with current standards.
• Connect power supply wires as indicated.
• Use only specified items for any system expansions.