IKEA STOREMOLLA Chest of Drawers

Step 1

Attach the anti-tip bracket assembly to the furniture frame. Use one screw (106989) and one wall anchor (100823). The bracket should be positioned as shown.

[Diagram shows attaching a bracket to the top rear of the furniture frame using a screw and anchor.]

Step 2

Insert three cam lock nuts (153552) into the pre-drilled holes on the top panel. Ensure they are oriented correctly.

[Diagram shows inserting cam lock nuts into holes on a panel.]

Step 3

Attach the side panels to the base frame. Use four cam bolts (107862) and tighten them into the side panels. Then, connect the side panels to the base, aligning the cam bolts with the cam lock nuts from Step 2.

[Diagram shows attaching side panels to a base using cam bolts and cam locks.]

Step 4

Attach the left side panel ('L') to the main structure. Use six screws (10101821) and six cam locks (100349). Insert the screws and then tighten the cam locks using a screwdriver [hand turning screw].

[Diagram shows attaching a side panel with screws and cam locks.]

Step 5

Attach the right side panel ('R') to the main structure. Use six screws (10101821) and six cam locks (100349). Insert the screws and then tighten the cam locks using a screwdriver [hand turning screw].

[Diagram shows attaching the other side panel with screws and cam locks.]

Step 6

Insert ten dowels (10047135) into the holes on the drawer slides. Ensure they are fully inserted.

[Diagram shows inserting dowels into drawer slide components. A crossed-out diagram indicates incorrect insertion.]

Step 7

Attach the horizontal support pieces to the side panels. Use six dowels (101345) for each support piece, inserting them into the pre-drilled holes.

[Diagram shows attaching horizontal bars to the side panels using dowels.]

Step 8

Connect the vertical side supports to the base structure. Align the holes and insert the dowels.

[Diagram shows inserting vertical supports into the base assembly.]

Step 9

Attach the back panels to the frame. Use three sets of cam locks (10071733) and cam bolts (119030) per panel. Insert the cam bolts and then tighten the cam locks [hand turning screw].

[Diagram shows attaching back panels using cam locks and bolts. A zoomed view shows the mechanism.]

Step 10

Attach the top panel to the assembled frame. Use eight dowels (101345) to secure the top panel in place.

[Diagram shows placing the top panel and securing it with dowels.]

Step 11

Slide the side panels into place. Ensure they are oriented correctly with the pre-drilled holes facing inwards.

[Diagram shows sliding large side panels into the frame.]

Step 12

Secure the side panels. Use two sets of cam locks (10071733) and cam bolts (119030) per side. Insert the cam bolts and tighten the cam locks [hand turning screw].

[Diagram shows securing side panels with cam locks and bolts.]

Step 13

Continue securing the side panels. Use five sets of cam locks (10071733) and cam bolts (119030) per side. Insert the cam bolts and tighten the cam locks [hand turning screw].

[Diagram shows further securing side panels with cam locks and bolts.]

Step 14

Slide the top drawer support panel into place, as indicated by the arrow.

[Diagram shows sliding a panel into the top section of the frame.]

Step 15

Attach the top surface. Use five sets of cam locks (10071733) and cam bolts (145718) to secure the top surface to the frame. Insert the cam bolts and tighten the cam locks [hand turning screw].

[Diagram shows attaching the top surface using cam locks and bolts.]

Step 16

Attach the front support piece. Use two screws (104257) and two cam locks (100001). Insert the screws and tighten the cam locks [hand turning screw].

[Diagram shows attaching a front support piece with screws and cam locks.]

Step 17

Install the drawer runners. Attach the runners to the inside of the frame. Use four dowels (101345) for each runner.

[Diagram shows attaching drawer runners to the side panels using dowels.]

Step 18

Install the drawer runners. Attach the runners to the inside of the frame. Use eight dowels (101345) for each runner.

[Diagram shows attaching drawer runners to the side panels using dowels.]

Step 19

Attach the drawer slides to the frame. Use six sets of cam locks (10071733) and cam bolts (119030) per side. Insert the cam bolts and tighten the cam locks [hand turning screw].

[Diagram shows attaching drawer slides to the frame using cam locks and bolts.]

Step 20

Assemble the drawer components. Insert six dowels (10047135) into the sides of the drawer base.

[Diagram shows assembling drawer sides using dowels.]

Step 21

Slide the top panel onto the assembled frame, aligning it with the pre-drilled holes.

[Diagram shows sliding the top panel onto the frame.]

Step 22

Secure the top panel. Use six cam locks (10071733) to fasten the top panel to the frame. Tighten the cam locks [hand turning screw].

[Diagram shows securing the top panel with cam locks.]

Step 23

Adjust the leveling feet. Rotate the feet at the bottom of the unit [hand turning dial] to ensure the furniture is stable and level on the floor. The arrows indicate adjustment direction.

[Diagram shows adjusting leveling feet at the base of the furniture.]

Step 24

Attach the anti-tip device to the wall. Follow the instructions provided with the anti-tip kit. Use appropriate wall fixings for your wall type. Visit www.IKEA.com/secure-it for more information on securing furniture.

[Diagram shows attaching the anti-tip bracket to the wall and then to the furniture. Includes a warning icon and reference to the website.]

Step 25

Secure the anti-tip strap. Use one screw (1x) and the provided mechanism to attach the strap to the furniture and the wall bracket. Follow the detailed steps shown in the magnified view.

[Diagram shows securing the anti-tip strap with a screw and mechanism.]

Step 26

Slide the furniture into its final position. The arrow indicates the direction of movement.

[Diagram shows sliding the assembled furniture into place.]

Steps 27-30: Wall Mounting and Drawer Assembly

These steps detail the process of attaching the furniture to the wall using the anti-tip device and assembling the drawers.

Step 27: Wall fixing options (A, B, C) are shown for different wall types. Use the supplied screws and plugs, or screws alone for solid wood. Consult a professional if unsure.

Step 28: Attach the wall bracket (10102070) to the furniture frame using the provided screw (1x).

Step 29: Secure the furniture to the wall bracket using screw (109048).

Step 30: Attach the drawer front to the drawer box using screws (109048) and (100823).

[Diagrams show wall mounting options, attaching brackets, and assembling drawer fronts.]

Steps 31-34: Drawer Assembly

Continue assembling the drawers.

Step 31: Insert four dowels (10047135) into the drawer sides.

Step 32: Attach drawer base panels using four dowels (101345) each.

Step 33: Connect the drawer sides to the drawer base.

Step 34: Secure the drawer sides using four sets of cam locks (10071733) and cam bolts (119030). Insert cam bolts and tighten cam locks [hand turning screw].

[Diagrams show detailed steps for assembling drawer boxes.]

Steps 35-38: Back Panel and Drawer Insertion

These steps involve attaching the back panel to the drawer and inserting the drawers into the unit.

Step 35: Slide the back panel into the groove on the drawer.

Step 36: Attach the drawer handle support using one hook (10040242) and a hammer ?.

Step 37: Place the drawer into the unit.

Step 38: Secure the drawer front. Use four sets of cam locks (131361) and cam bolts (145718). Insert cam bolts and tighten cam locks [hand turning screw].

[Diagrams show attaching drawer back panels, handles, and securing drawer fronts.]

Steps 39-41: Drawer Handles and Final Checks

Final steps for drawer assembly and unit completion.

Step 39: Attach the drawer knob. Use one screw (10091382) to attach the knob (10112730) to the drawer front.

Step 40: Slide the assembled drawers into the unit, aligning them with the runners.

Step 41: Ensure drawers slide smoothly. Check for any obstructions. The diagram shows correct drawer insertion and a warning about incorrect drawer stacking.

[Diagrams show attaching drawer knobs, inserting drawers, and final checks.]

Steps 42-43: Final Drawer Insertion and Adjustment

These steps show the final insertion of drawers and adjustments.

Step 42: Continue sliding all drawers into their respective positions.

Step 43: Ensure drawers open and close smoothly. The diagram shows how to adjust the drawer slides if needed.

[Diagrams show final drawer insertion and adjustment mechanisms.]