iTECH Jr Kids Smartwatch

Quick Start Guide

Quick 4 Steps

  1. Fully charge the iTECH Jr Smartwatch before using. A full charge takes 2 hours.
  2. Visit iTechwearables.com/setup for the full user guide on how to use and play instructions.
  3. Turn your iTECH Jr on to set date and time. Note: You can manually adjust the date and time under settings.
  4. You are ready to wear the watch and enjoy all the fun activities the iTECH Jr has to offer.

The iTECH Jr is a kids' smartwatch designed for fun and interactive play, requiring no smartphone or app. It is suitable for ages 3+ years.

Key Features:

Charging

When using your iTech Jr for the first time, fully charge the watch (2 hours). Note: Adult supervision/operation required.

Connect the watch to a computer or USB charger with the included Micro-USB Cable.

  1. Pull open the rubber cover of the watch's Micro-USB Port.
  2. Insert the small end Micro-USB cable into the watch's Micro-USB Port.
  3. Insert the large end of the cable into a powered USB port. A battery charging symbol will appear on the watch screen.

If the watch is not used for a while, the battery may go into protection mode and the charging symbol may not appear on the screen. Continue charging the watch for at least 30 minutes to activate the battery.

Power On/Off

To power on/off your iTech Jr, press and hold the [power icon] for a few seconds.

Clock Mode

When the screen is off, press the [home button] to wake up the watch and show the time.

Navigation

Features

Shutter Button

Press the [shutter button] to launch the camera and to take pictures.

Menu Screen 1

Menu Screen 2

Menu Screen 3

Menu Screen 4

Menu Screen 5

How to Download & Listen to Music

  1. Plug USB cable into smartwatch and power off.
  2. Plug other end into computer.
  3. Wait for the device to show up on screen, then open the music folder.
  4. Drag MP3 files into the folder.

A headphone jack is available on the watch [headphone jack].

Product Information & Support

For manual, support and product information scan or go to: support.itechwearables.com

Key Product Attributes:

Customer Service Email: support@itechwearables.com

FCC Compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Increase the separation between the equipment and receiver; Reorient or relocate the receiving antenna; Connect the equipment into an outlet on a circuit different from that to which the receiver is connected; Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be located or operated in conjunction with any other antenna or transmitter.

Safety & Skin Care

We want to make sure that your child is comfortable in their new iTECH Jr Smartwatch. Here are a few tips that should help:

iTECH Watch Care

Clean your band regularly, especially after strenuous exercise. It is recommended to rinse your band with water or wipe it with an alcohol wipe. Do NOT use any kind of soap, hand sanitizers, or household cleaners, which could get trapped beneath the band and irritate your skin.

It is a good idea to set your watch aside for 10-15 minutes after cleaning to ensure that the device is fully free of any potential irritants and completely dry.

For stains or buildup on your band, watch screen or casing, wipe the affected area with an alcohol wipe. Be sure to wipe gently. If affected area is on the band, you can use warm water and a soft bristle brush to remove the dirt, stain or build up.

To keep your device looking new, it is recommended to use a microfiber cloth to wipe off any smudges or finger prints from the casing, screen and band.

Watch Instructions

Adjusting Watch Bands for Leather, Silicone & Plastic Bands

Use the prong and notch system to move the prong up or down a notch to tighten or loosen and adjust to the appropriate fit for your wrist.

Changing / Replacing / Adding / Removing the Band from Your Watch

  1. Carefully place your watch face down on a folded cloth to avoid damaging the lens.
  2. Carefully insert the round end of the watch tool into the hole, toward the center of the strap. The spring bar should come free of its location hole.
  3. Lift out the band and spring bar.

A spring bar tool is used for this process.

Limited Warranty

This limited warranty gives you, the consumer, specific legal rights. You may also be entitled to certain rights, which vary from state to state. The limited warranty can also be found online at itechwearables.com/warranty or in the documentation provided with the product. iTech warrants that during the warranty period, this product will be free from defects in materials and workmanship. The duration and remedies of all implied warranties, including warranties of merchantability and fitness for a particular purpose, are limited to the duration of this express limited warranty. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. iTech's responsibility for defective goods is limited to repair, replacement, or refund as described below.

What is the period of coverage?

This limited warranty starts on the date of your purchase and lasts for one year (the "warranty period"). The warranty period is not extended if iTech repairs or replaces the product. iTech may change the availability of this limited warranty at its discretion, but any changes will not be retroactive.

Who may use this warranty?

iTech ("we") extend this limited warranty only to the consumer who originally purchased the product ("you"). It does not extend to any subsequent owner or other transferee of the product.

What does this warranty cover?

This limited warranty covers defects in materials and workmanship of all iTech products (the "product") for the warranty period.

What does this warranty not cover?

This limited warranty does not cover any damage due to: (a) transportation; (b) storage; (c) improper use; (d) failure to follow the product instructions or to perform any preventive maintenance; (e) modifications; (f) unauthorized repair; (g) normal wear and tear; or (h) external causes such as accidents, abuse, water damage or other actions or events beyond iTech's reasonable control. Devices that are not IP68 should not be submerged or used in water under any circumstances as this could lead to irreparable damage.

What are your remedies under this warranty?

With respect to any defective product during the warranty period, iTech will, in its sole discretion, either: (a) repair or replace such product (or the defective part) free of charge; (b) replace the product with a same or similar product; or (c) refund the purchase price of such product. There may be a fee associated with the warranty return in order to ship back the device to you.

How do you obtain warranty service?

To obtain warranty service, you must submit your claim through iTech's warranty portal (itechwearables.com/warranty-claim) during the warranty period. iTech may charge a fee for shipping and handling to return the repaired or replacement product. Shortly after submitting a claim, you will receive a warranty confirmation email, which you will need to include with your return package product when returning it to iTech. No warranty service will be provided without the confirmation email included in the package.

Limitation of Liability

The remedies described above are your sole and exclusive remedies and iTech's entire liability for any breach of this limited warranty. iTech's liability shall under no circumstances exceed the actual amount paid by you for the defective product, nor shall iTech be liable for any consequential, incidental, special or punitive damages or losses, whether direct or indirect. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.

What can you do in case of a dispute?

The following informal dispute resolution procedure is available to you if you believe that iTech has not performed its obligations under this limited warranty: you can email iTech at support@itechwearables.com. From there iTech's customer service agents can assist with any warranty issues.

US Warranty Only

iTech only offers warranty services within the domestic U.S.

The battery for your device cannot be replaced under any circumstances. If you experience any issues with your watch, please contact iTech's customer service center.

DO NOT RETURN PRODUCT TO THE STORE FOR SERVICING

STOP

FOR TECHNICAL ASSISTANCE, WARRANTY AND CUSTOMER SERVICE, EMAIL: support@itechwearables.com

PLEASE VISIT US AT: support.itechwearables.com

Models: Jr Kids, Smart Watch, Jr Kids Smart Watch, Watch

PDF preview unavailable. Download the PDF instead.

iTech Jr Kid Watch Quick Start Guide Acrobat Distiller 22.0 (Windows)

Related Documents

Preview iTech Fusion Smartwatch User Manual and Setup Guide
Comprehensive guide for the iTech Fusion smartwatch, covering setup, features, activity tracking, sleep monitoring, heart rate monitoring, sports modes, and care instructions. Learn how to connect, sync, and utilize all functionalities with the iTech Wearables app.
Preview iTech Fusion 2 Smartwatch User Manual: Setup, Features, and Care
A comprehensive guide to the iTech Fusion 2 Smartwatch, detailing setup, navigation, features such as activity tracking, heart rate monitoring, notifications, and essential wear and care instructions. Includes regulatory information.
Preview iTech Fusion 2 Smartwatch Quick Start Guide and User Information
A comprehensive guide to setting up, charging, and maintaining your iTech Fusion 2 smartwatch, including band replacement instructions and important safety and FCC compliance information.
Preview iTECH Active 2 User Manual: Setup, Features, and Care Guide
A comprehensive user manual for the iTECH Active 2 fitness tracker, detailing setup procedures, core features like heart rate monitoring, sleep tracking, notifications, multi-sports modes, and essential wear and care instructions.
Preview iTech Active 3 Smartwatch: Features and Packaging Overview
Explore the iTech Active 3 smartwatch, detailing its smart and app-powered features, compatibility, and the components of its packaging, including the outer box, inner card, and acetate cover. Designed in New York.
Preview iTech Active 3 Fitness Tracker: Quick Start Guide and Setup
Get started with your iTech Active 3 Fitness Tracker. This guide covers unpacking, charging, app download, pairing, and regulatory information for the iTech Active 3 (Model IA3S01).
Preview iTech Fusion 2 Smartwatch User Manual
User manual for the iTech Fusion 2 Smartwatch, covering setup, features, navigation, and care.
Preview iTECH Sport Fitness Tracker User Manual
Comprehensive user manual for the iTECH Sport Fitness Tracker, covering setup, features, wear and care, and regulatory information.