SONGESAND Wardrobe
Assembly Instructions
Important Safety Information
WARNING: Serious or fatal crushing injuries can occur from furniture tip-over. ALWAYS secure this furniture to the wall using tip-over restraints.
To further reduce the risk of serious injury and death from tip-overs:
- Place heaviest items in the lower drawer.
- Do not set TVs or other heavy objects on top of this product.
- Never let children climb or hang on drawers, doors, or shelves.
? Always secure furniture to the wall.
Tools and Hardware Overview
The following tools are recommended for assembly:
- Screwdrivers (Phillips head) ?
- Hammer ?
- Ladder ?
- Drill (for wall mounting) ?
Hardware includes various screws, dowels, cam locks, and wall mounting accessories. Specific quantities are detailed in each step.
Drill bit sizes for wall mounting: Ø 8 mm (5/16") and Ø 3 mm (1/8").
Parts List
Side Panels (2x)
Base Panel (1x)
Top Panel (1x)
Back Panels (multiple)
Shelves (multiple)
Doors (3x)
Hanging Rail (1x)
Dowels (e.g., 101345, 100214)
Cam Lock Screws (e.g., 118331, 112996)
Cam Locks (e.g., 119250, 119252)
Various Screws (e.g., 109049, 105248, 100408)
Hinges (e.g., 109338)
Hinge Plates (e.g., 109221)
Handles (e.g., 157426)
Wall Mounting Brackets (e.g., 106989)
Wall Anchors/Plugs (e.g., 121714)
Shelf Supports (e.g., 158568, 153548)
Drawer Runners (e.g., 159995, 159996)
Assembly Steps
Step 1: Connect the base panel to the two side panels. Insert dowels (101345) into the side panels. Align the base panel and secure with cam locks (118331, 112996).
Diagram shows dowels inserted into side panels, base panel aligning, and cam locks being used.
Step 2: Insert cam lock screws (118331, 112996) into the pre-drilled holes on the side panels.
Diagram shows screws being inserted into holes on the side panels.
Step 3: Attach one side panel to the base panel.
Diagram shows a side panel being connected to the base panel.
Step 4: Secure the side panel to the base panel using cam locks (119250, 119252). Rotate the cam locks to tighten.
Diagram shows cam locks being inserted and rotated to secure the connection.
Step 5: Attach a horizontal support bar (part of the frame) to the side panel using screws (105248) and connector (102553).
Diagram shows a horizontal bar being attached to the side panel with screws and a connector.
Step 6: Insert dowels (101345) into another horizontal support bar.
Diagram shows dowels being inserted into a horizontal bar.
Step 7: Attach the second side panel to the base panel.
Diagram shows the second side panel being connected to the base panel.
Step 8: Secure the second side panel to the base panel using cam locks (119250, 119252).
Diagram shows cam locks securing the second side panel to the base.
Step 9: Secure the second side panel to the horizontal support bar using cam locks (105248).
Diagram shows cam locks securing the second side panel to the horizontal bar.
Step 10: Attach a long horizontal support bar to the side panels using dowels (101345) and a hand-press action.
Diagram shows a long bar being attached to the side panels with dowels.
Step 11: Secure the long horizontal support bar using cam locks (119250, 119252).
Diagram shows cam locks securing the long horizontal bar.
Step 12: Attach the third vertical panel (divider) to the base and horizontal supports.
Diagram shows the third vertical panel being connected to the base and horizontal bars.
Step 13: Secure this panel using dowels (100214) and cam locks (100001).
Diagram shows dowels and cam locks being used to secure the vertical panel.
Step 14: Attach handles (157426) to the doors. The diagram shows handles being attached with screws (100408).
Diagram shows handles being screwed onto the doors.
Step 15: Attach another long horizontal support bar using dowels (101345).
Diagram shows dowels being inserted into a long horizontal bar.
Step 16: Attach a vertical panel to the base and horizontal supports.
Diagram shows a vertical panel being connected to the base and horizontal bars.
Step 17: Secure this panel using cam locks (119250, 119252).
Diagram shows cam locks securing the vertical panel.
Step 18: Attach another vertical panel to the base and horizontal supports.
Diagram shows another vertical panel being connected to the base and horizontal bars.
Step 19: Secure this panel using cam locks (119250, 119252).
Diagram shows cam locks securing the second vertical panel.
Step 20: Insert the main vertical divider panel into place.
Diagram shows the vertical divider panel being slid into position.
Step 21: Secure the vertical divider panel using cam locks (119250, 119252).
Diagram shows cam locks securing the vertical divider.
Step 22: Attach shelf supports (158568, 153548) to the inner side panels using screws.
Diagram shows shelf supports being screwed into place.
Step 23: Attach drawer runners (159995, 159996) to the side panels using screws (105248).
Diagram shows drawer runners being screwed onto the side panels.
Step 24: Insert dowels (101345) into the top panel.
Diagram shows dowels being inserted into the top panel.
Step 25: Attach cam lock screws (118331, 112996) to the top panel.
Diagram shows cam lock screws being attached to the top panel.
Step 26: Place the assembled top panel onto the wardrobe frame.
Diagram shows the top panel being lowered onto the assembled frame.
Step 27: Secure the top panel using cam locks (119250, 119252).
Diagram shows cam locks being used to secure the top panel.
Step 28: Attach the hanging rail support bar using screws (100214) and the provided tool (100001).
Diagram shows the hanging rail support bar being attached with screws and a tool.
Step 29: Attach wall mounting brackets (106989) to the top of the wardrobe using screws (109049) and washers (100823).
Diagram shows wall mounting brackets being screwed to the top of the wardrobe.
Step 30: Attach the top frame/support using screws (100214) and tool (100001).
Diagram shows a top support being attached with screws.
Step 31: Slide the back panels into the grooves on the wardrobe frame.
Diagram shows back panels being slid into place.
Step 32: Secure the back panels using fasteners (10093081).
Diagram shows fasteners being used to secure back panels.
Step 33: Secure the back panels using fasteners (10093081).
Diagram shows more fasteners being used on back panels.
Step 34: Secure the back panels using fasteners (10093082).
Diagram shows different fasteners being used on back panels.
Step 35: Attach the hanging rail (146856) to its supports.
Diagram shows the hanging rail being placed onto its supports.
Step 36: Attach hinge plates (131372) to the inside of the wardrobe frame.
Diagram shows hinge plates being attached to the wardrobe interior.
Step 37: Insert shelves into the wardrobe.
Diagram shows shelves being placed onto shelf supports.
Step 38: Attach screws (109049) to the back of the wardrobe for final securing.
Diagram shows screws being inserted into the back of the wardrobe.
Step 39: Attach wall mounting brackets to the wall. Use appropriate fasteners for your wall type (see Wall Mounting section).
Diagram shows wall brackets being attached to a wall.
Step 40: Insert shelf supports and a shelf.
Diagram shows shelf supports being inserted and a shelf placed on them.
Wall Mounting Instructions
This section details how to secure the wardrobe to the wall using the provided tip-over restraints. It is crucial for safety.
Wall Types:
- Type A (Solid Wall): Use screws directly. Drill Ø 8 mm (5/16") holes, 70 mm deep.
- Type B (Hollow Wall): Use screws with wall plugs. Drill Ø 8 mm (5/16") holes, approx. 30 mm deep. Insert plugs.
- Type C (Solid Wood): Use screws without plugs. Drill Ø 3 mm (1/8") holes, approx. 30 mm deep.
If you are uncertain about your wall type or the correct installation procedure, seek professional advice. Diagrams illustrate the drilling and fastening process for each wall type.
Door and Hinge Assembly
Steps 44-48: Attach hinge plates (109221) to the inside of the wardrobe frame using screws (105248). Attach hinges (109338) to the doors using screws (105248). Mount the doors onto the hinge plates and adjust as needed.
Diagrams show the attachment of hinge plates to the cabinet, hinges to the doors, and the process of mounting and adjusting the doors.
Final Touches
Steps 49-52: Attach handles (157426) to the doors using screws (100408). Perform final checks and adjustments to ensure all parts are secure and doors align correctly. Ensure all safety instructions, especially wall mounting, are followed.
Diagrams show handle attachment and final assembly checks.
YouTube
