Urmet Mod. 1158 Sinthesi Steel Outdoor Door Unit Installation Guide

Product Overview

This document provides installation instructions for the Urmet Sinthesi and Sinthesi Steel outdoor door units, designed for 1+n systems.

Sinthesi: The standard outdoor door unit model.

Sinthesi Steel: An outdoor door unit featuring a steel finish.

Diagram Description (Page 1): The page displays two outdoor door units: the standard 'Sinthesi' and the 'Sinthesi Steel'. Arrows indicate the assembly process, showing the main electronic module connecting to the front panel.

Installation Steps

The following steps detail the installation process:

1. Step 1: Mounting the Unit

   Diagram Description (Page 2): Illustrates mounting the backplate to the wall and connecting the main door unit module to the backplate. This is shown for both Sinthesi and Sinthesi Steel models.

2. Step 2: Wiring Connections

   Diagram Description (Page 2): Details electrical connections. A close-up view (labeled 'A' and 'B') shows specific terminals where cables are connected using screws. Two sets of cables are depicted.

3. Step 3: Securing the Unit

   Diagram Description (Page 2): Shows the final step of securing the installed door unit, likely by closing or fastening the front panel.

Features and Functionality

Call Feedback

The outdoor unit provides a visual "call feedback" signal. When a call is initiated from any button module, a blinking LED on the door unit indicates that the call is being successfully transmitted.

Accessibility

The outdoor unit is designed for connection with modules intended for people with hearing impairments.

Compliance and Disposal

WEEE Directive

This document references Directive 2012/19/EU of the European Parliament and of the Council concerning waste electrical and electronic equipment (WEEE).

The symbol of a crossed-out wheeled bin (♺) on the product or packaging indicates that it must not be disposed of with household waste. Users are responsible for handing over end-of-life equipment to designated collection points for recycling of electrical and electronic waste.

Proper separate collection and recycling help conserve natural resources and ensure environmentally sound recycling, protecting human health and the environment. For disposal information, contact local authorities or the place of purchase.

Wiring Diagram and Components

The document includes a detailed wiring diagram illustrating the system's electrical connections. The diagram lists key components and their connections:

• A: Riser / Column
• B: Door phones / Intercoms
• C: Transformer
• D: Mains Power
• E: Secrecy Function
• F: Connection to subsequent devices
• G: Button Module
• H: Connection to subsequent modules
• I: Outdoor Door Unit
• L: Lock Operation
• M: Electrical Lock
• N: Connection to bulb transformer
• O: Electrical Door Opener

Wire color codes are specified, including yellow and blue-black.

Manufacturer Information

URMET S.p.A.

VIA BOLOGNA 188/C

10154 TORINO (ITALY)

Telephone: +39 011.24.00.000 (RIC. AUT.)

Fax: +39 011.24.00.300 - 323

Technical Area Customer Service: +39 011.23.39.810

Website: http://www.urmet.com

Email: info@urmet.com

Made in Italy