SwanScout 505A Watch Charging Stand User Manual
Product Overview
This user manual provides essential information for the SwanScout 505A Watch Charging Stand. Before using the product, please read this manual thoroughly and take good care of it.
The charging stand features a base with a USB-C charging port. A stand extends upwards to hold a smartwatch. The smartwatch rests on a wireless charging area at the top. An indicator light is present on the stand to show the charging status.
Product Instructions
- Connect one end of the power cable to the USB-C port of the product and the other end to the charging adapter.
- Place your watch on the corresponding wireless charging area to charge.
Indicator Light Guide
| Charging Status | Indicator Status | Description |
|---|---|---|
| Power Connected | On for 1 second | Indicates the device has received power. |
| Standby | Off | The device is powered on but not actively charging. |
| Charging | Green light | The smartwatch is actively charging. |
| Fully Charged | Solid Green light | The smartwatch is fully charged. |
| Abnormal objects detected | Flashing Green light | Indicates foreign objects or an issue with the charging process. |
Product Compatibility
For information on specific compatible types of watches, please refer to the website's images or text descriptions.
Specifications
Input: 5V-2A
Watch Charging Output: 5W (Max)
Warnings
- Do not disassemble or change the internal structure of this product by yourself to avoid danger.
- Please use this product in the temperature range of 0°C-40°C (32°F-104°F). Do not use this product in high temperature and humid places to avoid equipment failure.
- Do not place metallic foreign objects in the wireless charging area.
- Do not throw this product into fire, otherwise it may cause the equipment to catch fire or explode.
- This product contains sensitive electronic components, including a battery, and can be damaged, impair functionality, or cause injury if dropped, burned, punctured, or crushed.
- Do not expose this product to high temperatures or around heat-generating devices such as heaters, microwave ovens, ovens, etc.
- Do not allow children or pets to swallow this product to avoid injury or other hazards.
- Radio waves generated by this product may interfere with pacemakers, defibrillators, or other medical devices. Maintain a safe distance of separation between your medical device and this product. Consult your physician and medical device manufacturer for information specific to your medical device. Stop using this product if you suspect it is interfering with your pacemaker, defibrillator, or any other medical device.
- Please comply with local regulations for the disposal of this product and its accessories, and support recycling operations.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Warning
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Note
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio/TV technician for help.
IC Statement
This device complies with RSS-216 of Industry Canada. Operation is subject to the condition that this device does not cause harmful interference.
RSS-Gen Issue 5 March 2019
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
RF exposure statement: The equipment complies with IC Radiation exposure limits set forth for uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
