SwanScout Multifunctional Wireless Charging Station

Product Overview

Please read this user manual carefully before using this product and keep it properly.

Product compatibility

Please refer to the website's images or text descriptions for information on specific compatible types of phones, earbuds charging cases, and watches.

User Instruction

Step 1: Plug in a QC3.0/PD charging adapter. A low-power charging adapter might not work.

Step 2: Put your phone, earbuds charging case or smart watch on the device for wireless charging.

Time setting:

• Short press "Time setting button" to select 12/24 hour system.
• Setting the hour: Long press the "Time setting button" for 3 seconds to enter setting mode, adjust time by pressing "+/- " button.
• Setting the minutes: Long press "Time setting button" for 3 seconds, then short press "Time setting button" to enter setting mode, adjust time by pressing "+/- " button.

Note: After setting, wait for 5 seconds to exit setting mode.

Display screen adjustment:

Clicking the brightness touch adjustment icon to adjust brightness of the display screen. The display screen brightness is adjusted by four levels cyclic.

Attention

1. This product has a built-in battery to provide power for the time display when not connected to a power source. When the power is exhausted, the time will return to the factory state, then you need to reset the time.
2. This product has an intelligent energy-saving function. In the case of not connected to the power supply, it will automatically turn off the time display in 10 minutes.

Indicator Light Guide

Specification

• Input: 9V/2A 5V/3A
• Charging Smart phone Output: 10W/7.5W/5W
• Charging Watch Output: 2.5W
• Charging Earbuds Output: 5W
• Charging Standard: Qi Compatible

Important Reminder

1. For maximum charging speed, please use a cable and an adapter compatible with QC (Quick Charge) 2.0/3.0 or PD (Power Delivery) fast charging.
2. Any phone case or earbuds case thicker than 5mm will stop this charger from working properly.

Warning

1. Do not disassemble or change the internal structure of this product by yourself to avoid danger.
2. Please use this product in the temperature range of 0°C -40°C (32°F -104°F). Do not use this product in high temperature and humid place to avoid equipment failure.
3. Do not place metallic foreign objects in the wireless charging area.
4. Do not throw this product into the fire otherwise may cause the equipment to catch fire or explode.
5. This product contains sensitive electronic components, including a battery, and can be damaged, impair functionality, or cause injury if dropped, burned, punctured, crushed.
6. Do not expose this product to high temperature or around heat generating devices such as heaters, microwave ovens, ovens, etc.
7. Do not allow children or pets to swallow this product to avoid injury or other hazards.
8. Radio waves generated by this product may interfere with pacemakers, defibrillators, or other medical devices. Maintain a safe distance of separation between your medical device and this product. Consult your physician and medical device manufacturer for information specific to your medical device. Stop using this product if you suspect it is interfering with your pacemaker, defibrillator, or any other medical device.
9. Please comply with local regulations for the disposal of this product and its accessories, and support recycling operations.

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Warning

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio/TV technician for help.

RSS-Gen Issue 5 March 2019

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

RF exposure statement:

The equipment complies with IC Radiation exposure limit set forth for uncontrolled environment. This equipment should be installed and operated With minimum distance 20cm between the radiator and your body.

IC Statement

This device complies with RSS-216 of Industry Canada. Operation is subject to the condition that this device does not cause harmful interference.