DiskGuard Raiden 2.5" USB to SATA HDD/SSD Enclosure

Product Overview

The DiskGuard Raiden 2.5" enclosure is designed to connect 2.5" SATA HDDs and SSDs to your computer via USB. It supports USB SuperSpeed 5Gbps and UASP for faster data transfer.

Models:

• Y-3036: Features a USB-A connector.
• Y-3036A: Features a USB-C connector.

Connectors and Indicators:

For Y-3036 (USB-A):

• A. USB-A Connector
• B. Blue LED Indicator: Flashes during read/write operations.
• C. Green LED Indicator: Lights up when power is connected.

For Y-3036A (USB-C):

• A. USB-C Connector
• B. Blue LED Indicator: Flashes during read/write operations.
• C. Green LED Indicator: Lights up when power is connected.

How to Install the Hard Disk Drive

1. Open the enclosure.

2. Insert your 2.5" SATA HDD or SSD into the connector inside the enclosure.

3. You may apply a sponge pad to fit the thickness of the HDD/SSD if necessary.

4. Close the enclosure securely.

5. Plug the enclosure into a USB port on your PC, laptop, or tablet.

Package Contents

• DiskGuard Raiden 2.5" Enclosure
• User Manual

Safety Notes

• Do not attempt to service or repair the product yourself. All service work should be left to qualified experts.
• Do not open the device or continue to operate it if it becomes damaged.
• Do not modify the product in any way. Doing so voids the warranty.
• Do not operate the product outside the power limits specified in the technical data.
• Protect the product from dirt, moisture, and overheating. Use only in a dry environment.
• Do not use the product in moist environments and avoid splashes or sprays of water.
• Do not drop the product and do not expose it to any major shocks.
• Keep this product, like all electrical products, out of the reach of children.

Warranty Disclaimer

UNITEK assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product, or failure to observe the operating instructions and/or safety notes.

Technical Data

Important Notes

• The hard drive may not be moved after connecting the power supply unit to the socket. This could result in damage to the hard drive and data loss.
• The hard drive adapter may not be unplugged from the PC during data transfer under any circumstance. Data may be lost.

Service and Support

Further support information can be found here: www.unitek-products.com

Email: support@unitek-products.com

Disposal Information

The crossed-out trash can symbol ? means that the equipment must not be disposed of with other waste. It should be disposed of in special containers according to the information prepared by the local government.