Hangzhou EZVIZ Software Co., Ltd. - Legal and Manual Information
Copyright © Hangzhou EZVIZ Software Co., Ltd. All Rights Reserved.
This user manual cannot be reproduced, changed, translated, or distributed without prior written permission from EZVIZ. EZVIZ makes no warranties regarding the manual.
About this Manual
This manual provides instructions for using and managing the product. Information is subject to change without notice. The latest version can be found on the EZVIZ website: http://www.ezvizlife.com.
Revision Record
New release – January, 2021
Trademarks Acknowledgement
EZVIZ™ and other EZVIZ trademarks and logos are properties of EZVIZ. Other trademarks mentioned belong to their respective owners.
Legal Disclaimer
The product is provided "AS IS" without warranties. EZVIZ is not liable for any special, consequential, incidental, or indirect damages. EZVIZ's total liability for damages will not exceed the original purchase price. EZVIZ is not liable for personal injury or property damage resulting from improper installation, misuse, force majeure, or third-party products/software. Use of products with internet access is at the user's own risk. EZVIZ is not responsible for abnormal operation, privacy leakage, or damages from cyber attacks, but will provide technical support. Users must comply with local surveillance and data protection laws. EZVIZ is not liable for illegitimate use. In case of conflict with applicable law, the law prevails.
Overview
1. Package Contents
The package typically includes:
- Open/Close Sensor: The main detection unit.
- Double-sided Tape: For mounting the sensor and magnet.
- Regulatory Information: A document detailing compliance and safety information.
- Quick Start Guide: A document providing initial setup instructions.
[Image Description: Visual representation of the package contents including the sensor, tape, and documentation.]
2. Basics
Components of the Open/Close Sensor:
[Image Description: A diagram showing the main sensor unit and a smaller magnetic component. Labels point to the 'RESET Button', 'Detector', 'Magnet', and 'LED Indicator' on the sensor.]
| Name | Description |
|---|---|
| RESET Button | Press and hold for over 5 seconds to make the sensor enter device adding mode. |
| LED Indicator |
|
Get the EZVIZ App
To manage your device, follow these steps:
- Connect your mobile phone to Wi-Fi.
- Download and install the EZVIZ app by searching for "EZVIZ" in the App Store or Google Play™.
- Launch the app and register an EZVIZ user account.
[Image Description: Buttons for downloading the EZVIZ app from the Apple App Store and Google Play Store.]
[Note: If you have already used the app, ensure it is the latest version. Check the app store for updates.]
Preparations
1. Detach Cover
Detach the cover of the sensor at the designated detaching groove.
[Image Description: A diagram showing the sensor body with a 'Detaching Groove' and the removable 'Cover'.]
2. Remove Insulation Strip
Remove the battery insulation strip as instructed in the figure below.
[Image Description: A diagram showing the internal battery compartment of the sensor, with the 'Battery' (CR1632 type) and the 'Insulation Strip' that needs to be pulled out.]
Important Notes:
- When the battery level is low, a notification will be sent to the EZVIZ app.
- To replace batteries, use two CR1632 batteries.
- When replacing batteries, ensure the positive side faces up.
- Keep hands dry and clean when handling the circuit board.
Add Device
The open/close sensor is designed to work with an EZVIZ Smart Gateway. First, add the gateway to the EZVIZ Cloud, then add the sensor to the gateway using one of the following methods.
1. Method One: Add by Scanning QR Code
- Log in to your EZVIZ account via the app. Tap the device adding icon to access the QR code scanning interface.
- Scan the QR code located on the inner side of the sensor cover or on the user manual.
- Follow the app prompts to add the sensor to the gateway.
[Image Description: A screenshot of the EZVIZ app displaying a QR code scanning interface.]
[Image Description: A diagram showing the internal components of the sensor, including the battery and PCB, and how the cover fits back onto the sensor body.]
2. Method Two: Add by the Gateway
[ℹ️ Note: When adding the sensor via the gateway, place the sensor as close to the gateway as possible.]
- Put the EZVIZ Smart Gateway into device adding mode as per its user manual.
- Press and hold the RESET button on the sensor for over 5 seconds. The indicator light will flash rapidly blue, indicating the sensor has entered adding mode.
- The sensor will be automatically added to the gateway.
Installation
Installation Guidelines:
- Place the sensor away from magnetic fields.
- When doors or windows are closed, the distance between the sensor and the magnet must be less than 20mm.
- Clean dust from the surface of the door or window before sticking the sensor. Do not stick on limewashed walls.
- Align the installation instruction grooves on the sensor and magnet.
- The installation height should not exceed 1.8m.
- The working temperature range is -10°C to 55°C.
Installation Steps:
- Select a suitable location for the sensor.
- Fix the sensor in the selected place using the double-sided tape.
- Press the sensor firmly for about 20 seconds to ensure adhesion.
[Image Description: A diagram illustrating the correct placement of the sensor and magnet on a door and frame. It shows the required distance of less than 20mm and highlights the 'Installation Instruction Groove' for alignment. A photograph shows the installed sensor and magnet on a door.]
Operations on the EZVIZ App
[ℹ️ Note: The app interface may vary due to version updates. The interface on your installed phone app takes precedence.]
1. Homepage
Launch the EZVIZ app and navigate to the homepage of the related gateway. You can manage your detector from this page.
- Log: View the detection log of the detector.
- Dismiss: Clear alarms of the detector.
2. Settings
Access the settings menu for your device:
| Parameter | Description |
|---|---|
| Device Name | Customize the name of your device. |
| Alarm Settings | When enabled, a warning will be issued if the door contact is triggered. You can set notification parameters as needed. |
| Linkage Camera | Select your camera to connect to the detector. Once connected, the camera will automatically pan to the location when the detector is opened or closed. |
| Related Devices | View the gateway connected to your detector. |
| Device Information | View detailed information about your device. |
| Share | Share your device with others. |
| Delete Device | Tap to remove the detector from your EZVIZ cloud account. |
