EZVIZ CST2C Open/Close Sensor User Manual

About this Manual

This manual provides instructions for using and managing the EZVIZ CST2C Open/Close Sensor. All information, including wordings, pictures, and graphs, is the property of Hangzhou EZVIZ Software Co., Ltd. (EZVIZ). The manual cannot be reproduced, changed, translated, or distributed without prior written permission from EZVIZ. EZVIZ makes no warranties or representations regarding the manual. Information is subject to change without notice due to firmware updates or other reasons. The latest version can be found on the EZVIZ website: http://www.ezvizlife.com.

Revision Record: New release - January, 2021

Trademarks: EZVIZ™ and its logos are properties of EZVIZ. Other trademarks belong to their respective owners.

Legal Disclaimer

EZVIZ provides the product, hardware, software, and firmware "AS IS", with all faults and errors. EZVIZ disclaims all warranties, express or implied, including merchantability, satisfactory quality, fitness for a particular purpose, and non-infringement. EZVIZ, its directors, officers, employees, or agents shall not be liable for any special, consequential, incidental, or indirect damages, including business profits, interruption, or data loss, even if advised of the possibility of such damages. EZVIZ's total liability for all damages shall not exceed the original purchase price of the product. EZVIZ is not liable for personal injury or property damage resulting from product interruption or service termination due to improper installation or usage, national or public interests, force majeure, or third-party products or software. For products with internet access, use is at your own risk. EZVIZ is not responsible for abnormal operation, privacy leakage, or damages resulting from cyber attacks, virus inspection, or other internet security risks, but will provide timely technical support if required. Users must comply with local surveillance and data protection laws. EZVIZ is not liable if the product is used for illegitimate purposes. In case of conflict between this disclaimer and applicable law, the latter prevails.

Overview

1. Package Contents

The package includes:

• Open/Close Detector
• Regulatory Information
• Quick Start Guide

2. Basics

The Open/Close Detector consists of:

• RESET Button: Press and hold for over 5 seconds to enter device adding mode.
• Detector: The main unit.
• Magnet: Used with the detector to sense opening and closing.
• LED Indicator: Fast-flashing Blue indicates device adding mode. Fast-flashing Blue once indicates door opening/closing signals triggered.
• Double-sided Tape Protective Film: Applied to the back for mounting.

The base of the detector also features a Detaching Groove.

Get the EZVIZ App

To use the device, connect your mobile phone to Wi-Fi, download and install the EZVIZ app from the App Store or Google Play™, and register an EZVIZ user account.

Note: Ensure you are using the latest version of the app. Check your app store for updates.

Preparations

1. Detach Cover

Detach the cover of the detector at the detaching groove.

2. Remove Insulation Strip

Remove the battery insulation strip as instructed. The detector uses two CR1632 batteries. When replacing batteries, ensure the positive side faces up.

Note: A low battery notification will be sent to the EZVIZ app when the battery level is low.

Add Device

The open/close detector requires an EZVIZ Smart Gateway. First, add the gateway to the EZVIZ cloud, then add the detector to the gateway.

1. Method One: Add by Scanning QR Code

1. Log in to your EZVIZ account, tap the device adding icon, and the QR code scanning interface will appear.
2. Scan the QR code on the inner side of the detector's cover or in the user manual.
3. Place the detector as shown in the figure.
4. Replace the cover.

2. Method Two: Add by the Gateway

Place the detector as close to the gateway as possible.

1. Follow the gateway's user manual to enter device adding mode on the gateway.
2. Press and hold the RESET button on the detector for over 5 seconds until the indicator flashes rapidly blue, indicating it has entered adding mode.
3. The detector will be added to the gateway automatically.

Installation

Installation Guidelines:

• Keep the detector away from magnetic fields.
• When doors or windows are closed, the distance between the detector and magnet should be less than 20mm.
• Clean dust from the mounting surface before sticking. Do not stick on limewashed walls.
• Align the installation instruction grooves on the detector and magnet.
• Maximum installation height is 2m.
• Working temperature range: -10°C to 55°C (14°F to 131°F).

Steps:

1. Select an installation location.
2. Remove the protective film from the back of the detector and fix it in place with the double-sided tape.
3. Press the detector firmly for about 20 seconds.

Regulatory Information

CE Marking: This product complies with applicable harmonized European standards under the Radio Equipment Directive 2014/53/EU, EMC Directive 2014/30/EU, and RoHS Directive 2011/65/EU.

WEEE Directive (2012/19/EU): Do not dispose of this product as unsorted municipal waste. Return it to your local supplier for recycling or dispose of it at designated collection points. More information is available at www.recyclethis.info.

Battery Directive (2006/66/EC): This product contains a battery. Do not dispose of it as unsorted municipal waste. Return the battery to your supplier or a designated collection point. For battery information, refer to the product documentation. Symbols may indicate Cadmium (Cd), Lead (Pb), or Mercury (Hg).

EC DECLARATION OF CONFORMITY: Hangzhou EZVIZ Software Co., Ltd. declares that the radio equipment types [CS-A1S-32W (E2G), CS-A1-32W, CS-A3, CS-T1C, CS-T2C, CS-T3C, CS-T9-A, CS-T4-A] comply with Directive 2014/53/EU. The full text is available at http://www.ezvizlife.com/declaration-of-conformity.

Power Adapters: Use only power adapters listed in the table. Equipment models and compatible adapter manufacturers/models are specified.

Important Safety Information

• Read the manual before using the device.
• The device is marked with a symbol indicating that the safety compatibility and/or installation manual must be read.
• Caution: Read these instructions before operating the equipment.
• Warning: For SELV DC input, the DC power source must comply with SELV requirements of IEC/EN 60950-1 or IEC/EN 62368-1.
• Warning: The power source should meet limited power source or PS2 requirements according to IEC/EN 60950-1 or IEC/EN 62368-1.
• Warning: To disconnect the device, unplug the DC power terminal.
• Warning: Battery disposal in fire or hot oven, or mechanical crushing or cutting can result in explosion.
• Warning: Battery in extremely high temperature environments can result in explosion or leakage.
• Warning: Battery under extremely low air pressure can result in explosion or leakage.
• Warning: Dispose of used batteries according to instructions.
• Warning: Replace only with the same or equivalent type recommended by the manufacturer.
• Caution: The product contains a replaceable battery.
• Warning: Do not ingest battery; Chemical Burn Hazard.
• Caution: Contains a coin/button cell battery. Swallowing can cause severe internal burns and death. Keep away from children.
• Caution: If the battery compartment does not close securely, stop using and keep away from children.
• Caution: Seek immediate medical attention if batteries are swallowed or placed inside the body.
• Caution: Risk of fire or explosion if battery is replaced with an incorrect type.

FCC Information

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

FCC Compliance: This equipment has been tested and found to comply with Class B digital device limits per FCC Rules Part 15. These limits provide reasonable protection against harmful interference in residential installations. The equipment generates, uses, and radiates radio frequency energy. If not installed and used per instructions, it may cause harmful interference to radio communications. No guarantee of no interference in a particular installation. If interference occurs, try correcting it by reorienting/relocating the antenna, increasing separation, connecting to a different circuit, or consulting a dealer/technician. Maintain a minimum distance of 20cm between the radiator and your body.

FCC Conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Industry Canada ICES-003 Compliance: This device meets CAN ICES-3 (B)/NMB-3(B) standards and Industry Canada licence-exempt RSS standard(s). Operation is subject to two conditions: (1) no interference, and (2) acceptance of any interference. Radio frequency transmitters may only operate with approved antenna types and gains. Maintain a minimum distance of 20cm between the radiator and your body.

French Translation: Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radioexempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une communication satisfaisante. Cet équipement doit être installé et utilisé à une distance minimale de 20 cm entre le radiateur et votre corps.

IFETEL Information: La operación de este equipo está sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operación no deseada.