Secukey C-Strike 5 Electric Bolt Lock - User Manual

1. Functional Specifications

The lock operates on 12VDC or 24VDC, featuring an auto-locking bolt function. It includes sensors for the door and the bolt, enabling monitoring of their status. The lock also has a closing delay function.

2. Installation and Instructions

2.1 Preparation: Please read the manual before installation and verify that all accessories are complete.

2.2 Lock Composition: The lock consists of a magnetic plate and a bolt. The distance between the plate and the bolt should be less than 3 mm.

2.3 Wiring: There are 9 wires: red, black, blue, white, yellow, green, gray, orange, purple.

• Bolt Sensor Wires:
• Blue: Normally Open (NO)
• White: Common (COM)
• Yellow: Normally Closed (NC)

• Door Sensor Wires:
• Green: Normally Open (NO)
• Gray: Common (COM)
• Orange: Normally Closed (NC)

2.4 Bolt Circuit Installation:

• For 24VDC: Connect the red wire to DC24V+ and the black and purple wires to DC24V-.
• For 12VDC: Connect the red wire to DC12V+ and the black wire to DC12V-.

2.5 Delay Adjustment: The delay adjustment switch is located in the middle of the lock (Figure 4). It can be set to 0, 3, or 6 seconds.

2.6 Installation: Refer to Figure 5 for installation details.

3. Parameters

• Lock Dimensions: 200L × 28W × 39H mm
• Bolt: 12.5 mm diameter, 15±1 mm length, made of stainless steel
• Operating Voltage: DC12V ±5%
• Inrush Current: 1100 mA
• Standby Current: 140 mA
• Timed Delay: 0, 3, 6 seconds

4. Accessories

• Iron Plate: 2 pieces
• Magnetic Plate: 90L × 24W × 3H mm - 1 piece
• Screws:
• M5 x 15 mm - 5 pieces
• M4 x 11 mm - 5 pieces

Diagram Descriptions

Figure 1: Illustrates the electric bolt lock, showing the lock body, bolt, magnetic plate, and the 9 wires with their colors (red, black, blue, white, yellow, green, gray, orange, purple). It also indicates the time delay switch.

Figure 2-A: Wiring diagram for a 24VDC connection to the lock, showing connections from an access control system or keypad, power supply, and the lock itself. It highlights the red wire for +24V and black/purple for -24V.

Figure 2-B: Wiring diagram for a 12VDC connection to the lock, similar to Figure 2-A but for 12VDC power. It shows the red wire for +12V and the black wire for -12V.

Figure 3-A: Details the bolt sensor wire connections, specifying the function of the blue (NO), white (COM), and yellow (NC) wires.

Figure 3-B: Details the door sensor wire connections, specifying the function of the green (NO), gray (COM), and orange (NC) wires.

Figure 4: Shows the time delay adjustment switch with settings for 0, 3, and 6 seconds.

Figure 5: Provides installation dimensions for the lock and the magnetic plate, including the mounting bracket for the magnetic plate.