Laney LF212 & LF412 Lionheart Foundry Series User Manual

Introduction

Welcome to the Laney LF212 & LF412 Lionheart matching cabinets. These cabinets offer a no-nonsense, no-compromise approach to tone.

LF212

The open-back LF212, with its 2x12 configuration, delivers uncompromising performance and robust durability. It produces a warm, rich low-end, a creamy and articulate mid-range, and a beautiful, smooth high-end, making it perfect for any musical style.

Road Ready

Designed with two 12-inch HH drivers, this 4-ohm cabinet boasts exceptional sonic clarity and a powerful 480W output. Its robust construction is protected by durable vinyl and stainless steel metal corners.

Great Guitar Tone

The secret to great guitar tone lies in the drivers. HH Acoustics has meticulously designed the H1260 drivers in the LF212 for the UK market. Engineered with incredible precision, they deliver classic tone. The careful design ensures that every nuance, from the cleanest cleans to the most aggressive overdrive, is reproduced faithfully.

Weighing just 14kg and measuring 445 x 681 x 280mm, this cabinet offers a versatile and high-quality solution for clean audio reproduction in any playing environment.

Features:

• High-excursion HH H1260 8Ω woofers
• Side-mounted heavy-duty bar handles
• Robust plywood construction
• Durable tolex finish

LF412

Introducing the LF412, a formidable 4x12 matching Lionheart cabinet.

The Laney LF412 is a superior 4x12 cabinet featuring four HH H1260 premium drivers.

This closed-back speaker cabinet utilizes time-proven construction methods to deliver the low-end, mid-range response, and overall sonic character you expect from a Laney 4x12 cabinet.

The LF412 delivers aggressive low-end, punchy low-mids, assertive high-mids, and crystalline highs. Its four 12-inch HH high-excursion drivers provide an impressive 960W of maximum output, delivering impact and clarity for even the most demanding players.

Road Ready

Like all Laney cabinets, the LF412 features a robust construction with a durable vinyl finish and stainless steel metal corners, combining exceptional durability with outstanding sonic performance.

Great Guitar Tone

The secret to great guitar tone lies in the drivers. HH Acoustics has meticulously designed the H1260 drivers in the LF412 for the UK market. Engineered with incredible precision, they deliver classic tone. The careful design ensures that every nuance, from the cleanest cleans to the most aggressive overdrive, is reproduced faithfully.

Measuring 696 x 681 x 350mm and weighing 24kg, this cabinet offers a rich sonic presence without compromising portability, making it a perfect match for live performances, studio recording, and practice.

Features:

• High-excursion HH H1260 16Ω woofers
• Side-mounted heavy-duty bar handles
• Robust plywood construction
• Durable tolex finish

Rear Panel

The input socket on the LF212 and LF412 cabinets is for connecting to your amplifier. Use a high-quality speaker cable.

Note: The impedance of your speaker should match or be slightly higher than the recommended output impedance of your amplifier. For example, if your amplifier is rated for 4Ω speakers, it is advisable to use a 4Ω or higher speaker cabinet.

LF212 Rear Panel:

LF412 Rear Panel:

Connections

Diagram showing the connection of an amplifier to the LF412 cabinet.

Specifications - LF212

Internal Connections

Diagram illustrating the wiring of two speakers in parallel.

Dimensions (mm) - LF212

Diagrams showing the dimensions of the LF212 cabinet from various angles.

Specifications - LF412

Internal Connections

Diagram illustrating the wiring of four speakers in parallel.

Dimensions (mm) - LF412

Diagrams showing the dimensions of the LF412 cabinet from various angles.

Safety and Warnings

Please read this user manual carefully to get the most out of your new product and to ensure its longevity and trouble-free performance. Keep it in a safe place for future reference.

1. Unpacking: Carefully inspect the product for any signs of damage that may have occurred during transit from the Laney factory to your dealer. If any damage is apparent, repack the unit in its original carton and contact your dealer. Should the unit develop a fault, you may need to return it to your dealer for service, so please retain the original shipping carton.
2. Amplifier Connection: It is recommended that a pattern for switching systems on and off is established and followed to prevent damage. Switch on your source equipment, mixers, effects processors etc., before switching on your amplifier with all system components connected. Many products produce large transient surges when switched on and off, which can damage speakers. By switching on your amplifier last and ensuring that the level controls are set to a minimum, any transient signal from other equipment should not reach the loudspeakers. Wait for all system components to stabilize (usually a few seconds). Similarly, when switching off, always turn the level controls on your amplifier down first and switch off the power before switching off other equipment.
3. Cables: Do not use screened or microphone cables for speaker connections. These are not adequate to handle the amplifier load and may cause damage to the entire system. Use good quality screened cables for all other purposes.
4. Service: Users should not attempt to service these products. Refer all servicing to qualified service personnel.
5. Observe all warnings.
6. Follow all instructions.
7. Do not use this apparatus near water.
8. Clean only with a dry cloth.
9. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
10. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
11. Apparatus with a Class I construction shall be connected to a mains socket outlet that has a protective earth connection. Do not defeat the safety purpose of the polarized or grounding-type plug. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
12. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
13. Only use attachments/accessories specified by the manufacturer.
14. Only use with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
15. The mains plug or appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. Ensure that the apparatus is unplugged during lightning storms or when unused for long periods.
16. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
17. Never break off the earth pin. Only connect to a power supply of the type indicated by the marking on the apparatus adjacent to the power supply cord.
18. If this product is to be mounted in an equipment rack, a rear support must be provided.
19. Important Note for UK Only: The colours of the wires in the mains lead of this appliance may not correspond with the colours marking the terminals in your plug, proceed as follows:
    • Wire coloured GREEN AND YELLOW must be connected to the terminal marked with the letter E, by the earth symbol, or coloured GREEN or GREEN AND YELLOW.
    • Wire coloured BLUE must be connected to the terminal marked with the letter N or coloured BLACK.
    • Wire coloured BROWN must be connected to the terminal marked with the letter L or coloured RED.
20. This electrical apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.
21. Exposure to extremely high noise levels can cause permanent hearing loss. Sensitivity to noise-induced hearing loss varies greatly from person to person, but almost everyone will lose some hearing if exposed to sufficient loud noise for a sufficient amount of time. The U.S. Government’s Occupational Safety and Health Administration (OSHA) has specified the permissible sound level exposures as follows:

    Duration Per Day in Hours	Sound Level dBA, slow response
    8	90
    6	92
    4	95
    3	97
    2	100
    1½	102
    1	105
    ½ or less	110
    ⅓ or less	115

    According to OSHA, any exposure over the above permissible limits could result in some hearing loss. Therefore, when operating this amplification system, wear ear protection if the exposure is in excess of the limits indicated above. To prevent potential damage to hearing, everyone exposed to a high sound pressure level should use hearing protectors or other means of protecting the ears as the equipment is operating. This amplification system, like any equipment capable of producing high sound pressure levels, should be used only by those who are adequately experienced in the use of such equipment and who are aware of the precautions necessary to prevent hearing damage.

22. If your product is fitted with a tilt-back mechanism or a rebate style cabinet, use this design feature with care. The amplifier can be easily moved between its upright and tilted-back positions, so only use the amplifier on a flat, stable surface. Do not operate the amplifier on a desk, table, shelf or other unsuitable and unstable platform.
23. The symbols and nomenclature used on the product and in this manual are intended to alert the operator to areas requiring additional attention.

CAUTION: This symbol is intended to alert the user to the presence of uninsulated 'dangerous voltage' within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

WARNING: This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

CAUTION: Risk of electric shock – Do not open. To reduce the risk of electric shock, do not remove any covers. No user-serviceable parts inside. Refer servicing to qualified service personnel.

CAUTION: To prevent fire or shock hazard, do not expose this apparatus to rain or moisture. Read the operating instructions before using this appliance for additional warnings.

FCC Compliance: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

WARNING: Changes or modifications to Laney approved equipment could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

CE Compliance: This product complies with the requirements of the following European directives, regulations and rules: CE Mark (93/68/EEC), Low Voltage (2014/35/EU), EMC (2014/30/EU), RoHS (2011/65)/EU), ErP (2009/125/EU).

Simplified EU Declaration of Conformity: Full text of the EU Declaration of Conformity is available at the following internet address: http://support.laney.co.uk/approvals

The purpose of the Declaration of Conformity described above complies with the relevant statutory requirements Electrical Equipment (Safety) Regulations 2016, Electromagnetic Compatibility Regulations 2016, The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012, and the Eco-design for Energy Related Products and Energy Information (Amendment) (EU Exit) Regulations 2012.

To minimize environmental impact, this product should not be disposed of with household waste at the end of its service life. It should be taken to an approved recycling centre in accordance with the recommendations of the WEEE (Waste Electrical and Electronic Equipment) directive applicable in your country.