Make It Real Disney Princess Jewelry Making Kit
Instructions for creating your own Disney Princess themed jewelry.
Important Safety Warnings
EN - WARNING! CHOKING HAZARD – small parts. Not suitable for children under 3 years. STRANGULATION HAZARD – Keep away from young children. ALWAYS use breakaway clasps when forming loops or chains longer than 30 cm (12 in).
FR - ATTENTION! RISQUE D'ÉTOUFFEMENT – Petites pièces. Ne convient pas aux enfants de moins de 3 ans. RISQUE D'ÉTRANGLEMENT – Tenir à l'écart des jeunes enfants. TOUJOURS utiliser les boucles à dégagement lors de la création de boucles ou de chaînes de plus de 30 cm (12 in).
AR - تحذير! خطر الاختناق. أجزاء صغيرة. غير مناسبة للأطفال دون عمر 3 سنوات. خطر الاختناق - يُحفظ بعيدًا عن متناول الأطفال الصغار. استخدم دائما المشابك المنفصلة عند تشكيل حلقات أو سلاسل أطول من 12 بوصة (30 سم).
Age recommendation: 0-3 [age-warning-symbol]
What's Inside
- 300 colorful plastic links
- 3 pairs of breakaway buckles
- 6 jump rings
- 2 metal chains (13 cm / 5 in)
- 2 Disney charms
- 4 plastic lobster clasps
Visual representation shows the different components included in the kit.
How to Link a Chain
Align the openings of two links together.
Illustration shows two plastic links with their openings aligned.
Push gently to join the links together.
Illustration shows two links being pushed together.
Turn the link so that the gaps do not align.
Illustration shows two linked pieces, with a note indicating that gaps should not align (A) and a crossed-out example where they do align (B).
Keep joining links to create your bracelet design!
Illustration shows a chain being formed by continuing to link pieces.
Important: Do not try to insert a link from a closed side, as it could break.
Illustration shows a link being inserted incorrectly (X) and a correct way (X).
How to Attach a Metal Chain
Take the jump ring and pull each end to open slightly with your fingers (no tools needed). Attach it to the end of the metal chain. Press the jump ring to close it afterwards.
Diagram shows opening a jump ring (A), attaching it to a metal chain end (B), and closing it.
Push gently to join the jump ring to the link and turn it so that the gaps do not align.
Diagram shows a jump ring attached to a plastic link, with a note about aligning gaps.
How to Attach Other Parts
These steps explain how to attach other components with jump rings (Charms, lobster clasps, breakaway buckles).
Align the jump ring of the selected part with the opening of the link.
Illustration shows a jump ring on a charm/clasp aligned with a plastic link opening.
Push slowly until inserted. Turn the link so that the joins do not align.
Illustration shows a component being inserted into a link, with a note about aligning gaps.
Take the jump ring and pull each end to open slightly with your fingers (no tools needed). Attach it to the end of the metal chain. Press the jump ring to close it afterwards.
Diagram shows opening a jump ring, attaching it to a metal chain end, and closing it.
Important Tip for Necklaces
Always use the breakaway buckle for necklace designs.
Illustration shows a necklace design using a breakaway buckle.
Inspiration Gallery
Here are some examples to inspire your own creations!
Visuals show several examples of completed bracelets and necklaces using the kit's components, demonstrating different color combinations and styles.
Make It Real
