Make It Real™ Bringing Creativity to Life™

Legend • Symboler • Symboler • Symboler

• Scissors ✂️
• Ruler ?
• Adhesive tape ?
• Craft glue ?
• Let dry ⏳
• Knot ?
• Double knot ??
• Repeat ?
• Find the center ?

Bracelet 1 • Armbånd 1 • Armband 1 • Armbånd 1

1. Measure and cut 35 cm (13 ¾ in) of elastic cord.
2. Tape one end of the elastic on a flat surface.
3. Thread the beads onto the elastic cord.
4. Make a jeweler's knot and add a drop of glue. Wait 5 minutes for it to dry.
5. Cut the excess elastic cord.

Bracelet 2 • Armbånd 2 • Armband 2 • Armbånd 2

1. Measure and cut 1 piece of 50 cm (19 ¾ in) of elastic cord.
2. Leaving 8 cm (3 in), tape one end on a flat surface.
3. Thread 7 beads.
4. To create a daisy, thread 4 pink beads and one yellow bead.
5. Thread the elastic cord in the first pink bead again.
6. Thread 2 pink beads.
7. Thread the elastic cord in the fourth pink bead again.
8. Repeat steps 3 to 7 until there are 5 daisies on the bracelet.
9. Make a jeweler's knot and add a drop of glue. Wait 5 minutes for it to dry.
10. Cut the excess elastic cord.

Bracelet 3 • Armbånd 3 • Armband 3 • Armbånd 3

1. Measure and cut 2 pieces of 35 cm (13 ¾ in) of elastic cord.
2. Tape one end of the elastics on a flat surface.
3. Thread a bead on the left cord.
4. Thread a jump ring on both elastic cords.
5. Thread a bead on the right cord.
6. Thread a jump ring on both elastic cords.
7. Repeat steps 3 to 6, twenty-four more times.
8. Overlap the ends of each cord. Secure the knot with a drop of craft glue or clear nail polish and cut off the excess lengths of cord after the knot.

Bracelet 4 • Armbånd 4 • Armband 4 • Armbånd 4

1. Measure and cut 35 cm (13 ¾ in) of waxed cord.
2. Thread 40 jump rings and center them on the cord.
3. Make a simple knot on each side of the jump rings.
4. To close the bracelet, make a knot with the left waxed cord onto the right waxed cord.
5. Make a knot with the right waxed cord onto the left waxed cord.
6. Cut the excess cords.

Bracelet 5 • Armbånd 5 • Armband 5 • Armbånd 5

1. Measure and cut 2 pieces of 35 cm (13 ¾ in) of waxed cord.
2. Leaving 12 cm (4 ½ in), tape one end on a flat surface.
3. Measure and cut 70 cm (27 ½ in) of waxed cord.
4. Make square knots for 5 cm (2 in) long.
5. Add a drop of glue to the knot. Wait 5 minutes for it to dry. Cut the excess cords.
6. Measure and cut 30 cm (12 in) of waxed cord.
7. Make square knots for 1 cm (½ in) long.
8. Make a knot at both ends.

Necklace • Halskæde • Halsband • Halskjede

1. Measure and cut 1 m (39 ½ in) of waxed cord.
2. Thread the 9 beads and center them on the cord.
3. Make a simple knot on each side of the beads.
4. Thread 3 beads. Make a simple knot. Cut the excess cords.

Important Safety Information

• Before wearing the bracelets, gently pull on them to make sure they are well secured!
• Avoid submerging bracelets in water.
• WARNING! CHOKING HAZARD - small parts. Not suitable for children under 3 years.
• STRANGULATION HAZARD - Keep away from young children.

Contact & Manufacturing Information

MAKE IT REAL

1700 Reisterstown Rd Ste 211 Pikesville MD 21208 USA 410-995-8685

Jactin House, 24 Hood Street Ancoats, Manchester, M4 6WX UK +44 (0) 161 302 4100

EU Responsible Person (Cosmetics): EU Authorized Representative (Toys): Ansvarlig person i EU (kosmetik): EU autoriseret repræsentant (legetøj): Ansvarig person inom EU (kosmetika): EU auktoriserade representant (leksaker): EU ansvarlig person (kosmetikk): EU autorisert representant (leker): MDSS GmbH Schiffgraben 41, 31075 Hannover, DE

© 2022 MAKE IT REAL, LLC

Made in China / Fremstillet i Kina / Tillverkat i Kina / Produsert i Kina

Visit makeitrealplay.com