MEIKEE B04-21FLB-M-E Motion Sensor Security Light User Manual
Model: B04-21FLB-M-E
Product Overview
The MEIKEE B04-21FLB-M-E is a high-performance LED security flood light equipped with an integrated PIR motion sensor. Designed for outdoor use, it provides super bright illumination, enhancing safety and security for garages, gardens, backyards, and other exterior areas. Its robust IP66 waterproof rating ensures reliable operation in various weather conditions.
Key Features
- Super Bright Illumination: Delivers 5200 lumens of daylight white light (6500K) for excellent visibility.
- Motion Sensor Technology: Features a PIR (Passive Infrared) sensor for automatic activation upon detecting movement.
- Adjustable Timer: Customizable illumination duration from 10 seconds to 600 seconds (⏱️ 10s, ⏱️ 45s, ⏱️ 120s, ⏱️ 600s).
- IP66 Waterproof Rating: Designed to withstand dust and powerful water jets, making it suitable for outdoor environments.
- Durable Construction: Built with high-quality materials for long-lasting performance.
- Energy Efficient: 60W power consumption for bright light with reduced energy usage.
Technical Specifications
| Feature | Specification |
|---|---|
| Brand | MEIKEE |
| Model Number | B04-21FLB-M-E |
| Product Type | LED Security Flood Light with Motion Sensor |
| Power | 60W |
| Lumen Output | 5200 Lumens |
| Color Temperature | 6500K (Daylight White) |
| Sensor Type | PIR Motion Sensor |
| Waterproof Rating | IP66 (? IP66) |
| Detection Range | [Specify if known, e.g., Up to 50 ft, 180° detection angle] - *Assuming typical values* |
| Timer Settings | 10s, 45s, 120s, 600s (⏱️ 10s, ⏱️ 45s, ⏱️ 120s, ⏱️ 600s) |
| Voltage | [Specify if known, e.g., 120V AC] - *Assuming typical values* |
| Manufacturer | Shenzhen Oumeike Lighting Technology Co., Ltd. |
Installation Guide
Important: Ensure power is switched off at the circuit breaker before installation.
- Mounting: Select a suitable location for mounting the light fixture. Use the provided mounting bracket and hardware to securely attach it to a wall or post. Ensure the fixture is positioned to cover the desired detection area.
- Wiring: Connect the wires according to local electrical codes. Typically, this involves connecting the live wire (usually black) to the corresponding terminal, the neutral wire (usually white) to its terminal, and the ground wire (usually green or bare copper) to the grounding screw or terminal.
- Sealing: Ensure all wire connections are secure and properly insulated. Use waterproof connectors if necessary.
- Power On: Once installation is complete and secure, restore power at the circuit breaker.
Note: For detailed wiring diagrams and specific mounting instructions, refer to the original PDF manual.
Operation and Adjustments
The MEIKEE security light features adjustable controls for the motion sensor and illumination timer.
- SENS (Sensitivity): Adjusts the sensitivity of the motion sensor (⚙️). Turn clockwise to increase sensitivity (detects motion from further away) and counter-clockwise to decrease it.
- TIME (Timer): Sets the duration the light stays on after motion is detected. Select from the available timer settings (e.g., 10s, 45s, 120s, 600s). Turn the dial to the desired time.
- LUX (Ambient Light Sensor): This setting determines when the motion sensor becomes active.
- SUN (☀️): The sensor operates day and night.
- MOON (?): The sensor operates only at night or in low-light conditions.
Testing: After setting the controls, test the motion sensor by walking through the detection area. Adjust settings as needed for optimal performance. ▶️
Troubleshooting
- Light does not turn on: Check power supply, ensure the circuit breaker is on, verify wiring connections, and confirm the LUX setting is appropriate for current light conditions. ❌
- Light stays on constantly: Check the TIME setting and ensure no continuous motion is detected. The sensor might be too sensitive or misaligned.
- Motion not detected: Increase SENS sensitivity, check detection angle and range, and ensure the sensor lens is clean.
Safety Precautions
- Always disconnect power before installation or maintenance.
- Install the fixture in accordance with all local electrical codes.
- Do not look directly into the LED light source.
- Ensure the fixture is securely mounted to prevent falling.
- This product is intended for outdoor use as specified by its IP66 rating.
Support and Warranty
For further assistance, warranty information, or to contact MEIKEE customer support, please refer to the official MEIKEE website or the contact details provided in the original product packaging.
