MEIKEE LED Garden Light
Thank you for purchasing MEIKEE products. To ensure a better shopping experience, please follow the instructions for use step by step.
If you have any questions about our products, please contact our customer service. Our after-sales team will reply you at the first time and resolve any problems about the products.
E-mail: meikee@meikeelighting.com
Parameters
| Model | Power | Rated Voltage | Color temperature | Lumen | IP Rating | Input Lead | Ta |
| AC-TYP032 | 32W | AC85-265V/50-60HZ | 2700K | 2700 | IP54 | L/N | -25~40℃ |
| AC-TYP032 | 32W | AC85-265V/50-60HZ | 6500K | 3000 | IP54 | L/N | -25~40℃ |
Function
Sensing distance: 5-8 meters
Light control + Sensing mode: In the night time, the light will be on for 30 seconds when motion is detected.
Warning
- The LED module can't be replaced; you need to replace the entire lamp if it's damaged or reaches its service life.
- If the wire is damaged, the lamp can no longer be used and needs to be scrapped.
- If the casing breaks or water enters, the lamp can no longer be used and needs to be scrapped.
- Do not stare at the LED lighting-emitting luminaire surface closely for a long time, to prevent eye injury.
- Under no circumstances should the luminaire be covered by a thermal pad or similar material.
- The lamp requires a professional electrician for installation.
- IP54 Protection: The product cannot be used in the rain or immersed in water, otherwise it may cause leakage.
- The product does not contain push-in terminals; you need to prepare your own terminals according to the installation and wiring requirements.
Component and Structure Diagrams
- ① Metal Hook
- ② Motion sensor
- ③ Lamp Panel
- ④ Shell
- ⑤ Lampshade with lens
Installation Steps
- Connect the wires.
- Suspension installation: adjust the angle of light heads.
Reminder
The detection distance depends on the ambient temperature. If the ambient temperature is close to or higher than the human body temperature, the sensing detection distance will be shorter. Conversely, if the ambient temperature is lower than the human body temperature, the sensing detection distance will be farther.
Routine Maintenance
- To ensure the light works normally, please clean the lamps regularly.
- Make sure the power is off before maintenance.
- To avoid damage to the lamp, please do not clean it with chemicals.
Multilingual Information
This product is also available in German, Italian, French, Spanish, and Japanese. Please refer to the respective sections for detailed instructions and warnings in those languages.
Company Information
Manufacturer: Shenzhen Oumeike Lighting Technology Co., Ltd.
Address: No.19-20, Anye Road, Yuanshan Street, Longgang District, Shenzhen, Guangdong, China
Phone: +86 0755-28608199
Website: http://www.meikeelighting.com
European Representative: C&E Connection E-Commerce (DE) GmbH, Zum Linnegraben 20, 65933, Frankfurt am Main, Germany. E-mail: info@ce-connection.de Tel:+49 (069) 27246648
UK Representative: CET PRODUCT SERVICE LTD., Beacon House Stoken church Business Park, Ibstone Rd, Stoken church High Wycombe HP143FE UK. Tel:+447419325266 E-mail: info@cetproduct.com
