Behringer PK108A/PK110A Quick Start Guide
Active 240-Watt 8"/320-Watt 10" PA Speaker System with Built-in Media Player, Bluetooth Receiver and Integrated Mixer
Important Safety Instructions
General Precautions:
- Read all instructions before use.
- Keep instructions for future reference.
- Heed all warnings.
- Follow all instructions.
- Do not use this apparatus near water.
- Clean only with a dry cloth.
- Do not block any ventilation openings. Install according to manufacturer's instructions.
- Do not install near any heat sources (radiators, heat registers, stoves, or other apparatus that produce heat).
- Do not defeat the safety purpose of polarized or grounding-type plugs.
- Protect the power cord from being walked on or pinched.
- Use only attachments/accessories specified by the manufacturer.
- Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer.
- Unplug this apparatus during lightning storms or when unused for long periods.
- Refer all servicing to qualified personnel.
- The apparatus shall be connected to a MAINS socket outlet with a protective earthing connection.
- Do not install in a confined space.
- Do not place naked flame sources, such as lighted candles, on the apparatus.
Battery Warning (CR2032):
- Risk of fire or explosion if battery is replaced by an incorrect type.
- Do not ingest. Button cell batteries can cause severe internal chemical burns in as little as 2 hours.
- Keep new and used batteries OUT OF REACH OF CHILDREN.
- Seek immediate medical attention if a battery is suspected to be swallowed or inserted inside any part of the body.
- Dispose of batteries properly according to local regulations.
WEEE Directive: This product must not be disposed of with household waste. Follow national laws for recycling electrical and electronic equipment.
Controls and Features
Digital Media Player & Bluetooth Section:
- (1) SD/MMC Slot: For playing audio files from SD or MMC cards.
- (2) LED DISPLAY: Shows current file and playback settings.
- (3) USB Input: For playing audio files from a USB stick.
- (4) INFRARED RECEIVER: Connects to the remote control.
- (5) PLAYBACK SECTION: Includes PLAY/PAUSE, BACK, FORWARD, REPEAT, VOL-, VOL+, 100+, 200+, NUMERIC KEYPAD, and MODE buttons.
- (6) PLAY/PAUSE Button: Starts and stops audio playback.
- (7) VOL- Button: Decreases volume.
- (8) VOL+ Button: Increases volume.
- (9) EQ Button: Activates EQ presets (Normal, Pop, Rock, Jazz, Classical, Country) accessible via remote on PK108A/PK110A.
- (10) 100+ Button: Skips forward 100 tracks.
- (11) 200+ Button: Skips forward 200 tracks.
- (12) NUMERIC KEYPAD: For direct value input.
- (A) MODE Button: Selects USB, SD/MMC, or Bluetooth as the source.
- (B) PLAY/PAUSE Button: Controls playback.
- (C) REPEAT Button: Selects repeat modes (One, Random, Folder, All).
- (D) BACK Button: Skips to previous track/folder; hold to decrease digital volume.
- (E) FORWARD Button: Skips to next track/folder; hold to increase digital volume.
- (F) LINKING Button: For fast-linking two speakers via Bluetooth.
Audio Inputs & Outputs:
- (6) MIC Combo Jack: Accepts XLR, 1/4" TRS, or 1/4" TS connectors.
- (7) LEVEL Knob: Controls input level for the MIC combo jack.
- (8) MASTER Knob: Adjusts final speaker volume.
- (9) HIGH Knob: Adjusts treble frequencies.
- (10) LOW Knob: Adjusts bass frequencies.
- (11) LINE/MP3 Knob: Controls volume for LINE IN and MP3 signals.
- (12) MP3/LINE Switch: Toggles between MP3 player and LINE IN sources.
- (13) AUX IN Jacks: Accepts unbalanced stereo signals via RCA connectors.
- (14) AUX OUT Jacks: Sends unbalanced stereo signal out via RCA connectors.
- (15) LINE IN Jack: Accepts audio via 1/8" stereo connectors (e.g., from MP3 players, smartphones).
- (16) PWR LED: Indicates power is on.
- (17) CLIP LED: Indicates signal peak limiting.
- (18) EXTENSION OUTPUT: Connects to an additional speaker cabinet (min. 8 ohm total load).
- (19) POWER Switch: Turns the unit on/off.
- (20) AC INPUT Socket: Connects the IEC power cable.
Diagrams show control layouts for reference.
Getting Started
Setup:
- Place the speaker in the desired location.
- Set all controls to minimum (LEVEL, LINE/MP3, MASTER to full counter-clockwise; HIGH/LOW EQ to 12 o'clock).
- Make all necessary audio connections.
- Turn on audio sources (mixer, microphones, instruments).
- Turn on the speaker using the POWER switch. The PWR LED will illuminate.
Audio Playback:
- USB/SD/MMC: Insert media, select source via MODE button, use playback controls to select and play files. Adjust LINE/MP3 knob for volume, then MASTER for overall volume.
- LINE IN: Connect device to LINE IN jack, set device output to 50%, switch to LINE mode (MP3/LINE switch extended), adjust LINE/MP3 knob for source volume, then MASTER for overall volume.
- MIC Input: Connect microphone/source to MIC combo jack, adjust LEVEL knob for desired input level. Lower LEVEL if CLIP LED indicates distortion.
- AUX IN: Connect stereo devices to AUX IN via RCA cables. Set device output to 50%. Adjust LINE/MP3 knob for source volume, then MASTER for overall volume.
Extension Speakers:
- Ensure unit is off and MASTER knob is at minimum.
- Connect speaker cable from EXTENSION OUTPUT to the additional speaker cabinet.
- Turn on and slowly increase MASTER knob to desired volume.
- Ensure total impedance is a minimum of 8 ohms.
Bluetooth Pairing:
- Press MODE to select Bluetooth (bt).
- Enable Bluetooth on your device and search for PK108A/PK110A.
- Select the speaker from your device's menu.
- Set device output volume to 50%.
- Play audio, adjust LINE/MP3 knob for balance, and MASTER knob for final volume.
Bluetooth Fast-Link (Stereo Pairing):
- Place speakers close together (within 10m).
- Designate one as Master, one as Slave.
- Set MASTER knobs on both to 50%.
- On Slave: ensure LINE/MP3 switch is in MP3 position, set LINE/MP3 knob to MIN.
- On Master: Press MODE to select BLUETOOTH (bt), then press LINKING.
- On Slave: Press MODE to select BLUETOOTH (bt), then press LINKING.
- LED Displays will show "bt:bt" during pairing, then "bt" when connected.
- Play audio on Master speaker; stereo channels will separate automatically.
- Adjust LINE/MP3 on Slave for initial balance, then use MASTER knobs for final volume.
Specifications
| Feature | PK108A | PK110A |
|---|---|---|
| Amplifier Max Output Power | 240 W* | 320 W* |
| Type | Class-AB | Class-AB |
| Woofer | 8" (210 mm) LF driver | 10" (255 mm) LF driver |
| Tweeter | 1" (25.5 mm) HF compression driver | 1" (25.5 mm) HF compression driver |
| Frequency Response | 20 Hz to 20 kHz (-10 dB) | 20 Hz to 20 kHz (-10 dB) |
| Sound Pressure Level (SPL) | Max. 90 dB | Max. 90 dB |
| Audio Connections | USB / SD / TF | USB / SD / TF |
| MP3 Playback File System | FAT 16, FAT 32 | FAT 16, FAT 32 |
| Format | MP3 / WMA / WAV / FLAC / APE | MP3 / WMA / WAV / FLAC / APE |
| Bit Rates | 32 800 kbps | 32 800 kbps |
| Sample Rates | 44.1 kHz | 44.1 kHz |
| Input (MIC) | 1 x XLR / 1/4" TRS combo jack, 20 k balanced | 1 x XLR / 1/4" TRS combo jack, 20 k balanced |
| Line in | 1 x 1/8" (3.5 mm) TRS, stereo, 15 k | 1 x 1/8" (3.5 mm) TRS, stereo, 15 k |
| Aux in | 2 x RCA, 15 k, unbalanced | 2 x RCA, 15 k, unbalanced |
| Aux out | 2 x RCA, 100 k, unbalanced | 2 x RCA, 100 k, unbalanced |
| SD card slot | Up to 32 GB supported | Up to 32 GB supported |
| Bluetooth Frequency Range | 2402 MHz ~ 2480 MHz | 2402 MHz ~ 2480 MHz |
| Channel Number | 79 | 79 |
| Version | Bluetooth spec 5.0 compliant | Bluetooth spec 5.0 compliant |
| Compatibility | Supports A2DP 1.2 profile | Supports A2DP 1.2 profile |
| Max. communication range | 10 m (without interference) | 10 m (without interference) |
| Max. output power | 10 dBm | 10 dBm |
| Equalizer High | 12 dB @ 10 kHz, shelving | 12 dB @ 10 kHz, shelving |
| Equalizer Low | 12 dB @ 100 Hz, shelving | 12 dB @ 100 Hz, shelving |
| Power Supply, Voltage (Fuses) USA / Canada | 120 V~, 60 Hz (F 2 A L 250 V) | 120 V~, 60 Hz (F 2 A L 250 V) |
| UK / Australia / Europe | 220-240 V~, 50/60 Hz (F 1 A L 250 V) | 220-240 V~, 50/60 Hz (F 1 A L 250 V) |
| Korea / China | 220-240 V~, 50 Hz (F 1 A L 250 V) | 220-240 V~, 50 Hz (F 1 A L 250 V) |
| Japan | 100 V~, 50/60 Hz (F 2 A L 250 V) | 100 V~, 50/60 Hz (F 2 A L 250 V) |
| Power consumption | 90 W | 90 W |
| Mains connection | Standard IEC receptacle | Standard IEC receptacle |
| Dimensions (H x W x D) | 435 x 295 x 245 mm (17.13 x 11.61 x 9.65") | 545 x 355 x 295 mm (21.46 x 13.97 x 11.61") |
| Weight | 6.8 kg (14.9 lbs) | 8.9 kg (19.6 lbs) |
*Independent of limiters and driver protection circuits
**The Bluetooth word mark and logos are registered trademarks of Bluetooth SIG, Inc. and any use of such marks by Behringer is under license.
Other Important Information
1. Online Registration: Register your Music Tribe equipment at musictribe.com for faster repair claims and warranty support.
2. Malfunction: Contact your local Music Tribe Authorized Reseller or Fulfiller. If unavailable, check the Online Support section at musictribe.com. Submit warranty claims online BEFORE returning the product.
3. Power Connections: Ensure correct mains voltage. Replace fuses only with identical types and ratings.
FCC Compliance: This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) it may not cause harmful interference, and (2) it must accept any interference received. Unauthorized modifications may void the user's authority to operate the equipment. FCC RF Radiation Exposure Statement: Maintain minimum 20cm distance between radiator and body.
EU Declaration of Conformity: This product complies with relevant EU directives. Full text available at https://community.musictribe.com/
EU Representative: Music Tribe Brands DK A/S, Gammel Strand 44, DK-1202 Kbenhavn K, Denmark.
UK Representative: Music Tribe Brands UK Ltd., 8th Floor, 20 Farringdon Street London EC4A 4AB, United Kingdom.
Music Tribe
Music Tribe
