VEVOR Pipe Inspection System

Applicable models: WP9600A / 9600A

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves the right to be subject to the product you received. We apologize if we do not inform you again if there are any technology or software updates on our product.

Need Help? Contact Us!

Have product questions? Need technical support? Please feel free to contact us: CustomerService@vevor.com

ATTENTIONS

1. Please read the manual carefully before using it.
2. Handle it carefully during operation; avoid throwing down or pressing it heavily.
3. Please keep distance from the system when charging.
4. After being used, turn off the display and pull out all the connection joints.

DESCRIPTION

1. High resolution camera and clear picture.
2. Night vision.
3. High-quality special cable, waterproof and anti-corrosion/cold/tensile.
4. 12V 4500MA lithium battery.
5. With sun-visor for a bright environment outside.
6. Range of Application: Water-supply pipe, Air-conditioner pipe, Cable pipe, Pipeline vacuum system, PLUNBIN pipe, Buildings, Sunken pipe.
7. Operating Temp: -10°C to 60°C

PRODUCT SPECIFICATION

INSTRUCTION FOR PRODUCT: 1. Camera

The camera unit consists of the following parts:

• 1. Metal Contact Chip
• 2. Spring
• 3. Highlight White LED
• 4. Camera Lens

Product Specification (Camera)

INSTRUCTION FOR PRODUCT: 2. Coil

Cable Length Scale: The scaled cable can show the cable length.

Fixed Buckle: Used for fixing the cable wheel.

SPECIAL DETECTION CABLE FIXER

Useful Tool

Diagram showing how to coil the cable:

Diagram showing how to release the cable line:

INSTRUCTION FOR PRODUCT: 3. Cell Box

The Cell Box has the following labeled parts:

• 1. Monitor Video
• 2. Power of Monitor
• 3. Adjacent Coil Plug
• 4. AV Output
• 5. Batt (Battery indicator)
• 6. Power Input for Charger
• 7. Light-Degree Adjustment for White Light LED
• 8. Power Switch
• 9. Power Light

System Installation

1. Vital: Turn off the power switch before connecting the video camera and the monitor to prevent damage.
2. Connect the camera to the 3-coil plug, 2-cell box, and the 1-monitor (refer to Picture 1).
3. Turn on the power switch in the power box. The indicator light on the monitor should illuminate, and the switchboard should start.
4. Install the video camera with its protective cover and insert it into the pipe. Rotate the coil to achieve the proper depth.
5. Adjust the LED light degree adjuster to achieve the proper light level. For videotape operations, refer to the DVR operation details (display operation: Recording Type).
6. Switch video output to another large screen via the video line.
7. After use, carefully remove the camera from the pipe. Clean it with a clean, soft, and dry cloth and store it properly.

Picture 1 shows the system setup with the camera, coil, and cell box connected.

OPERATION

Charging

When the battery power is low, charge it as follows:

1. Take out the battery and the charger from the packaging.
2. Connect the charger to the battery.
3. Connect the charger to the AC power source (100-240V). The red indicator light means charging is in progress.
4. The green indicator light means charging is complete.

Notes: To ensure the battery can be used for a longer period, please charge it promptly. Otherwise, it may not be rechargeable.

TROUBLE SHOOTING

Additional Troubleshooting

OPERATING INSTRUCTIONS FOR HD DVR

Button Functions:

• REC/-: Z (Function may vary based on context, typically for recording or adjusting settings)
• Play/+: To switch between recording and photographing (refer to the icon in the top left corner).
• MENU: To access and loop through the settings main menu / Long press to rotate the screen 0°, 90°, 180° or 270°.
• >: To zoom out.
• <: To zoom in the image (0-36X).
• POWER: To power on/off the display screen.

1. Main Menu Settings

1. Press the MENU button to access the setup menu: PICTURE; OPTION; TIME; PHOTO; VIDEO.
2. Press the </> buttons to navigate to the sub-menu.
3. Press the REC button to adjust the setting's value, or press the REC button to enter/confirm.
4. Press the PLAY button to exit.

2. Recording and Photographing

1. Press the PLAY button to switch between Recording and photographing (refer to the icon in the top left corner).
2. Press the REC button to start recording/photographing, and press the REC button again to stop recording.

3. Photo playback on monitor

1. Press the MENU button to find PHOTO.
2. Press the </> buttons to find Playback.
3. Press the REC button to enter, then use </> to select and press REC button to playback.
4. Press the PLAY button to exit.

4. Video playback on monitor

1. Press the MENU button to find RECORD.
2. Press the </> buttons to find Playback.
3. Press the REC button to enter, then use </> to select and press REC button to enter.
4. Press the REC button to playback.
5. Press the PLAY button to exit.

COMPLIANCE INFORMATION

FCC INFORMATION

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

EU ENVIRONMENTAL PROTECTION

This product is subject to the provision of European Directive 2012/19/EC. The symbol showing a wheelie bin crossed through indicates that the product requires separate refuse collection in the European Union. This applies to the product and all accessories marked with this symbol. Products marked as such may not be discarded with normal domestic waste, but must be taken to a collection point for recycling electrical and electronic devices.

*There may be minor changes to the numbers included in the user manual without prior notice.

REPRESENTATIVES