Applicable Models
WP9600A / 9600ANeed Help? Contact Us!
For product questions or technical support, please contact us at: CustomerService@vevor.com
This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves the right to interpret its user manual. The appearance of the product may differ slightly from the product you received. We appreciate your understanding that we may not inform you again about technology or software updates for our product.
Attentions
- Please read the manual carefully before using it.
- Handle it carefully during operation; avoid throwing it down or pressing it heavily.
- Please keep distance from the system when charging.
- After use, turn off the display and pull out all the connection joints.
Description
- High resolution camera and clear picture.
- Night vision capability.
- High-quality special cable: waterproof, anti-corrosion, cold-resistant, and tensile.
- 12V 4500MA lithium battery.
- Includes a sun-visor for bright outdoor environments.
- Range of Application: Water-supply pipe, Air-conditioner pipe, Cable pipe, Pipeline vacuum system, PLUNBIN pipe, Buildings, Sunken pipe.
- Operating Temperature: -10°C to 60°C.
Product Specification
| Item | Parameter |
|---|
| Charger | AC 100-240V DC 12.6V 1000MA |
| Battery | Lithium battery |
| Continuous use time for battery | Approximate 6h |
| Investigation depth | 00m, 70m, 92.0m, 120m (selectable line length) |
| Material | Fiber tube with high intensity |
| Camera light source | With high white light |
| Camera material | Stainless steel |
| Menu languages | Multi-language |
| Camera picture | Clear |
Instruction for Product
1. Camera
Components:
- 1. Metal Contact Chip
- 2. Spring
- 3. Highlight White LED
- 4. Camera Lens
Product Specification (Camera)
| Item | Parameter |
|---|
| Camera diameter | 23 mm |
| With the tube diameter | >V0mm |
| Camera light source | 12 LED with high white light (adjustable) |
| Camera working voltage | 0V |
| Lights' working voltage | 12V |
| Waterproof | IP68 |
| Camera material | Stainless steel |
| Camera size | 143 mm* 23 mm |
| Camera protective cover | Plastic-steel |
| Camera protective cover size 1 | 29mm* 40mm |
| Camera protective cover size 2 | 40mm* 90mm |
2. Coil
Features:
- Cable Length Scale: The scaled cable can show the cable length.
- Fixed Buckle: Secures the cable wheel.
Special Detection Cable Fixer - Useful Tool
How to Coiled Cable: [Image showing how to coil the cable]
How to Release the Cable Line: [Image showing how to release the cable line]
3. Cell Box
Components:
- 1. Monitor Video
- 2. Power of Monitor
- 3. Adjacent Coil Plug
- 4. AV Output
- 5. Battery Indicator
- 6. Power Input for Charger
- 7. Light-Degree Adjustment for White Light LED
- 8. Power Switch
- 9. Power Light
System Installation
- Important: Turn off the power switch before connecting the video camera and the monitor to prevent damage.
- Connect the camera to the 3-coil plug, 2-cell box, and the 1-monitor. (See Picture 1)
- Turn on the power switch in the power box. The indicator light on the monitor will illuminate, and the switchboard will start.
- Install the video camera with the protective cover and insert it into the pipe. Rotate the coil to the proper depth.
- Adjust the LED light degree to the appropriate brightness. For videotape operations, refer to the DVR operation details (display operation: Recording Type).
- Switch video to another large screen via the video line.
- After use, carefully remove the camera from the pipe. Clean it with a soft, dry cloth and store it properly.
[Picture 1 showing the system components connected]
Charging
When the battery power is low, follow these steps to charge:
- Unpack the battery and the charger.
- Connect the charger to the battery.
- Connect the charger to a 100-240V AC power source. The red indicator light signifies charging.
- The green indicator light signifies that charging is complete.
Notes: To ensure longer battery life, please charge the battery promptly. Otherwise, it may not be rechargeable.
Troubleshooting
| Problem | Solution |
|---|
| Blue screen | - Check if the camera interface is loose and if the camera itself is loose, causing a poor connection.
- Check if the cable and power supply connection is normal or loose.
- Check if the monitor is properly connected to the power supply.
- Check if the cable is broken.
- Check if water has entered the front of the camera or if the camera is damaged.
- When using the camera, ensure the protective cover is attached to prevent the camera from colliding with hard objects and causing damage or inability to display images.
|
| Problems with LED lights | - Read the manual and check if the light is turned on correctly.
- Check if water has entered the front of the camera, preventing the LED from lighting up.
|
| Not running | - Check if the battery power is sufficient.
- Check if the display screen is damaged.
- Ensure the display screen is properly connected to the power supply.
|
| Photo/video cannot be saved | - Check the memory card.
- Check for foreign objects or deformation in the memory card.
|
| Cannot format | Check the memory card. |
| Unable to charge | - Check the charging port for foreign objects or damage.
- Check if the charger is damaged.
- If the battery level is too low, charge the battery promptly to prevent it from becoming unchargeable due to depletion.
|
| Broken cable | - It is recommended to use the cable on pipes with a diameter of ≥ 60 cm. Pay attention to the force when pushing the cable to avoid breaking the detection line.
- This product is exclusively for pipeline detection and inspection and cannot be used for other purposes.
|
| Cable knotting | - When retracting and releasing cables, ensure they are not crossed or knotted, and the bending radius of the cables is not less than 90 degrees.
- When retracting the cable, cooperate with the rotating iron frame for orderly recycling, and do not use excessive force.
|
| Equipment cleaning | Turn off the equipment before cleaning to avoid damage. |
| Warning | If the fault cannot be resolved, do not disassemble the unit yourself. Please contact customer service. |
Operating Instructions for HD DVR
- REC/-: Z
- Play/+: To switch between recording and photographing (refer to the icon in the top left corner).
- MENU: To access and loop through the main settings menu / long press to rotate the screen 0, 90, 180, or 270 degrees.
- >: To zoom out.
- <: To zoom in the image (0-36X).
- POWER: To power on/off the display screen.
1. Main Menu Settings
- Press the MENU button to access the setup menu: PICTURE; OPTION; TIME; PHOTO; VIDEO.
- Press the </> button to navigate to the sub-menu.
- Press the REC button to adjust the setting's value or press REC to enter/confirm.
- Press the PLAY button to exit.
2. Recording and Photographing
- Press the PLAY button to switch between Recording and photographing (refer to the icon in the top left corner).
- Press the REC button to start recording/photographing, and press REC again to stop.
3. Photo playback on monitor
- Press the MENU button to find PHOTO.
- Press the </> button to find Playback.
- Press the REC button to enter, then use </> to select and press REC to playback.
- Press the PLAY button to exit.
4. Video playback on monitor
- Press the MENU button to find RECORD.
- Press the </> button to find Playback.
- Press the REC button to enter, then use </> to select and press REC to enter.
- Press the REC button to playback.
- Press the PLAY button to exit.
FCC Information
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
EU Environmental Protection
This product is subject to the provisions of European Directive 2012/19/EC. The symbol showing a wheelie bin crossed through indicates that the product requires separate refuse collection in the European Union. This applies to the product and all accessories marked with this symbol. Products marked as such may not be discarded with normal domestic waste but must be taken to a collection point for recycling electrical and electronic devices.
*There may be minor changes to the numbers included in the user manual without prior notice.
Representatives
EC REP
EUREP GmbH
Unterlettenweg 1a,
85051 Ingolstadt, Germany
UK REP
Eurep Uk Ltd
Unit 2264, 100 Ock Street, Abingdon
Oxfordshire England Ox14 5dh
Address: 250 bis boulevard Saint-Germain 75007 Paris UK
Address: 2 Holywell Lane, London, England, EC2A 3ET
Manufacturer: Shenzhen Woshijie Electronic Technology Co., LTD
Add: 5Floor, B2B 501 Building
Pingshan District, Shenzhen, China
