DETOLF Glass-Door Cabinet

⚠️ Safety Warning

Serious or fatal crushing injuries can occur from furniture tip over. To prevent tip over, this furniture must be used with the wall attachment device(s) provided.

Screw(s) and plug(s) for the wall are not included. Use screw(s) and plug(s) suitable for your walls. If you are uncertain, seek professional advice. Read and follow each step of the instruction carefully.

Parts List

Assembly Instructions

Step 1: Assemble Base Frame

Attach the two side panels to the base panel using screws and the provided Allen key (100002). Ensure 2 units are used as shown.

Step 2: Attach Back Supports

Secure the horizontal back support bars to the assembled frame using screws and the Allen key (100002). Ensure 4 units are used.

Step 3: Attach Base Supports

Fix the four feet/base supports (113290) to the bottom corners of the frame using screws (109562) and a tool. Ensure 4 units are used.

Step 4: Insert First Glass Panel

With assistance, carefully slide the first large glass panel (labeled '1') into the designated grooves in the frame. Avoid applying excessive force or damaging the glass. ⚠️ Do not force the glass.

Step 5: Secure First Glass Panel

Insert small securing parts into the frame to hold the first glass panel in place. Ensure 2 units are used.

Step 6: Insert Second Glass Panel

With assistance, carefully slide the second large glass panel (labeled '2') into the designated grooves in the frame. Avoid applying excessive force or damaging the glass. ⚠️ Do not force the glass.

Step 7: Secure Second Glass Panel

Insert small securing parts into the frame to hold the second glass panel in place. Ensure 2 units are used.

Step 8: Attach Top Panel

Place the top panel onto the assembled frame and align it correctly.

Step 9: Secure Top Panel

From underneath the top panel, secure it to the frame using screws (100600) and the Allen key (100002). Ensure 4 units are used.

Step 10: Prepare Doors for Hinges

Attach the door hinge parts (101649) to each of the glass doors. Ensure 1 unit is used per door.

Step 11: Attach Hinge Clips to Doors

Secure the hinge clips onto the door hinge parts (101649) on the glass doors. Ensure 2 units are used per door.

Step 12: Attach Door Hinges to Frame

Attach the door hinge components (101649) to the main cabinet frame using screws (100002). Ensure 1 unit is used.

Step 13: Connect Door to Frame

Connect the bottom of the door to the frame by inserting the door guide/bracket (10004736) into the bottom of the door and then into the corresponding slot on the cabinet base.

Step 14: Attach Second Door

Repeat steps 10-13 to attach the second door to the other side of the cabinet frame.

Step 15: Final Check and Cleanup

Ensure all parts are securely fitted. Discard any temporary or packaging materials as shown. ?️

Step 16: Install Door Stoppers

Attach the door stopper (102047) to the top of the frame and the door stopper (102039) to the bottom of the frame. Ensure 1 unit of each is used.

Step 17: Attach Main Hinges

Attach the main hinge components (109842) to the cabinet frame. Ensure 2 units are used.

Step 18: Install Top Caps

Place the top caps (147208) onto the top of the cabinet. Ensure 2 units are used.

Step 19: Insert Shelf Supports

Insert the shelf support pins (102433) into the desired pre-drilled holes on the inside of the cabinet side panels. Ensure 12 units are used.

Step 20: Place Shelves

Carefully place the glass shelves onto the installed shelf support pins.

Step 21: Attach Wall Mounting Brackets

Secure the wall mounting brackets (106989) to the top of the cabinet using screws (109049) and bracket screws (100823). Ensure 2 units are used.

Step 22: Final Door Attachment

Attach the doors to the main cabinet structure by connecting the hinge components. Ensure the doors open and close smoothly.