Artemide Pipe LED INTEGRALIS®

Design: Herzog & De Meuron

Product Overview

The Artemide Pipe LED INTEGRALIS® is a versatile lighting fixture designed by Herzog & De Meuron. It is suitable for both indoor and outdoor applications.

Key symbols and certifications observed:

CE Marking [CE]: Indicates conformity with health, safety, and environmental protection standards for products sold within the European Economic Area (EEA).
IP20: Protection against solid objects greater than 12.5mm, but no protection against water.
Earth Symbol [?]: Indicates the product requires earthing for safety.
LEDO: Likely a manufacturer-specific or product line designation.
Dimmable Light Symbol [?]: Suggests the light output can be adjusted.

Installation Guide

The following steps outline the installation process for the Artemide Pipe LED INTEGRALIS®.

Step 1: Initial Assembly

Attach a component to the main body of the lamp using a screwdriver [?].

Step 2: Connecting Base Unit

Connect the base unit to the main lamp structure, indicated by a downward arrow [⬇️].

Step 3: Electrical Connection Preparation

Prepare the electrical connections by routing wires into a junction box or terminal block area.

Step 4: Mounting Preparation

Use a drill to create mounting holes and insert appropriate wall or ceiling fixings [?].

Step 5: Securing the Mounting Base

Attach the mounting base to the surface using screws and a screwdriver [?].

Step 6: Wiring Connections

Connect the electrical wires to the terminal block. Ensure correct polarity:

Diagram 6a: Shows connections for Live (L), Neutral (N), and Earth (?).
Diagram 6b: Shows connections for Live (L), Neutral (N), and Phase (PL). The Earth connection [?] is also indicated.

Wires are secured into screw terminals.

Step 7: Attaching the Lamp Body

Mount the main body of the lamp onto the secured base unit, indicated by an upward arrow [⬆️].

Step 8: Final Tightening

Secure the lamp assembly by tightening a final screw with a screwdriver [?].

Usage and Flexibility Guidelines

The flexible arm of the Pipe LED INTEGRALIS® can be adjusted. Observe the following guidelines:

Incorrect Configurations (❌)

Avoid sharp bends or kinks in the flexible arm.
Do not twist the flexible arm excessively.
Avoid angled or unsupported configurations that strain the arm.
Do not create tight loops or circular configurations with the flexible arm.

Correct Configurations (✔️)

Use gentle curves for the flexible arm.
Ensure the flexible arm is supported appropriately.
When forming a loop, maintain a minimum diameter of 20 cm [?].
Various gentle curved configurations are permitted.

Maintenance

To clean the fixture, use a cleaning spray [?] and a soft cloth [?].

	Artemide Dreispitz Suspension Horizontal Luminaire - Silver Product overview of the Artemide Dreispitz Suspension Horizontal luminaire, featuring a silver finish, detailed dimensions, technical specifications, and design by Herzog & de Meuron. Suitable for architectural indoor applications.
	Artemide Algoritmo System: Pre-Wired LED Projector Gear for 37 Cube (3000K DALI) Explore the Artemide Algoritmo System, a versatile modular lighting solution for projectors. This pre-wired LED gear system, designed for 37 Cube projectors, offers direct and indirect 3000K DALI illumination, suitable for continuous lines or angled installations. Features include high efficacy, DALI dimming, and compliance with EN60598-1.
	Artemide Chilone Floor and Wall Light Assembly Instructions Comprehensive assembly guide for the Artemide Chilone floor and wall-mounted lighting fixtures, designed by E. Gismondi. Includes step-by-step instructions for installation, wiring, and mounting for both floor and wall applications.
	Artemide Tolomeo Midi LED: Installation and Operation Guide Comprehensive guide for the Artemide Tolomeo Midi LED lamp, covering installation for various mounting types (table, wall, clamp, floor), operation, dimming, and LED replacement. Includes safety warnings and technical specifications.
	Artemide Dreispitz Wall/Ceiling Luminaire - Silver \| 2 Diffused Emission 90 Discover the Artemide Dreispitz wall and ceiling luminaire, featuring a 2 diffused emission design in silver. Specifications include dimensions and wattage. Designed by Herzog & de Meuron.
	Artemide Algoritmo System: Pre-wired Gear Tray for Projectors Detailed specifications for the Artemide Algoritmo System, a modular pre-wired gear tray for projectors. Features direct and indirect emission, 3000K color temperature, and architectural indoor design. Includes technical data on power, luminous flux, efficiency, dimensions, and compliance.
	Artemide Cabildo Suspension Light - Installation Guide Official installation guide for the Artemide Cabildo suspension lighting fixture. Includes step-by-step instructions, wiring diagrams, and contact information.
	Artemide Come Together LED Lamp: Installation, Usage, and Warranty Guide Comprehensive guide for the Artemide Come Together LED lamp, covering installation, usage, battery life, safety warnings, and warranty. Features Carlotta de Bevilacqua design.