Artemide

Cabildo

Design: E. Solé

Suitable for: ? INDOOR, ? OUTDOOR

Product Overview

The Cabildo is a suspension lighting fixture designed by E. Solé for Artemide. It is suitable for both indoor and outdoor applications.

Important Information

[Warning] ⚠️ Please read all instructions carefully before installation.

[Information] ? Refer to the manual for detailed guidance.

The installation process involves several steps, including electrical connections and mounting.

Icons indicate:

[Question Mark]?: Consult manual
[Arrow] →: Proceed to next step
[Document] ?: Refer to documentation
[Person Reading] ?‍?: Follow instructions

Installation Guide

The following steps detail the installation of the Cabildo suspension light.

Step 1: Prepare Mounting Plate

Secure the mounting plate to the ceiling or surface. Use a screwdriver [Screwdriver] ? to loosen or tighten screws as indicated.

[Diagram Description: Shows a screwdriver being used on a mounting plate with screw holes.]

Step 2: Attach Fixture Body

Connect the main body of the fixture to the prepared mounting plate. The diagram shows the fixture being aligned and attached.

[Diagram Description: Shows the main body of the light fixture being attached to the mounting plate, with an upward arrow ⬆️ indicating attachment.]

Step 3: Prepare Electrical Connections

Access the electrical connection points. This step may involve opening a junction box or cover.

[Diagram Description: Shows hands connecting wires within an electrical junction box.]

Step 4: Secure Canopy

Attach the canopy to the ceiling. Use a drill [Drill] ?️ and screws to fix the canopy in place.

[Diagram Description: Shows a drill and screws being used to attach a ceiling canopy.]

Step 5: Electrical Wiring

Connect the power supply wires to the fixture. Follow the color coding carefully.

5a. Standard Wiring

Connect the wires as follows:

White/Blanc/Blanco to White/Blanc/Blanco
Green/Vert/Verde to Green/Vert/Verde
Black/Noir/Negro to Black/Noir/Negro

[Diagram Description: Close-up view of wire connections with labels for wire colors. An upward arrow ⬆️ indicates the direction of connection.]

5b. Wiring with Dimmer

If using a dimmer, connect the wires according to the diagram showing LINE Input, DIMMER, and LED DRIVER.

[Diagram Description: Shows a wiring diagram with labels for LINE Input, DIMMER, and LED DRIVER, and wire color connections.]

Step 6: Final Assembly

Attach the main light ring to the fixture body. The diagram shows the ring being lifted into place.

[Diagram Description: Shows the main light ring being attached to the upper part of the fixture, with an upward arrow ⬆️.]

Step 7: Adjust Suspension Height

Adjust the suspension cables to achieve the desired height. The diagram shows a mechanism for adjusting cable length.

[Diagram Description: Shows a hand adjusting a cable to change the height of the light fixture. An up/down arrow ↕️ indicates adjustment.]

[Diagram Description: Shows the completed installation of the light fixture on a ceiling.]

Care and Maintenance

[Information] ? Consult the manual for detailed care instructions.

To clean the fixture, use a soft cloth. A spray bottle [Spray Bottle] ? icon indicates the use of a cleaning agent.

[Diagram Description: Shows a hand wiping a surface with a cloth, with a spray bottle icon nearby.]

Contact Information

Artemide (Italy)

Address: via Bergamo, 18, 20010 Pregnana M.se (MI), ITALIA

Tel: +39 02 935 181

Fax: +39 02 935 90 254, +39 02 935 90 496

Website: www.artemide.com

VAT: IT00846890150

Artemide Inc. (USA)

Address: 250 Karin Lane, Hicksville, NY 11801

Tel: 631 694 9292

Toll Free: 1-877-Art-9111

Fax: 631 694 9275

Website: www.artemide.net

Artemide Ltée/Ltd. (Canada)

Address: 11105 rue Renaude Lapointe, Montréal, Québec H1J 2T4

Tel: 514 323 6537

Toll Free: 888 777 2783

Fax: 514 323 8864