YYK-Q92 Wireless Earbuds User Manual

Product Specifications

Multiple Use Key Functions

• Pause/play: Double click the MFB key
• Previous song: Long press the MFB button on the L side for 1 second
• Next song: Long press the MFB button on the R side for 1 second
• Volume up: Triple tap the L side
• Volume down: Triple click on the R side
• Answer the call: Double-click the MFB button
• Hang up the phone: Double-click the MFB button
• Call rejection: Press and hold the MFB button for 1 second
• Cancel a call: Double-click the MFB button
• Call Siri: Three clicks of the MFB key (without music playing)
• Disable Siri: Double-click the MFB button

Diagram Description: The image shows two earbuds, each with a microphone hole and an MFB button labeled for the left (L) and right (R) sides.

Power on/off

1. When you start using it for the first time, when the headset is taken out of the charging compartment, it will automatically turn on. Putting the headset back into the charging compartment will start charging and turn off automatically.
2. When the earphones are not in use, put them back into the charging case to automatically shut down.

How to reset

During the pairing state of the earphones, press the MFB button four times. Place the earphones into the charging case, and they will automatically power off and begin charging. Once removed from the case, the earphones will automatically power on, and the reset process will be completed.

How to pair

1. Take out the power from the charging compartment.
2. Automatic pairing of earphones.
3. Open the settings of the mobile phone/tablet → Bluetooth → turn on Bluetooth → search YYK-Q92 → pairing/connection → play music.

Computer/laptop pairing method

Open computer settings → devices → Bluetooth and other devices → turn on Bluetooth → add Bluetooth or other devices → search for Bluetooth devices YYK-Q92 → pair/connect → play music.

Note: If the computer does not have Bluetooth, please plug in the Bluetooth adapter, download the Bluetooth driver, and then use it normally.

How to charge the headset

1. Put the headset into the charging compartment, and the headset will automatically shut down and start charging. The display lamp of the charging compartment lights up, indicating that the charging compartment is charging the headset.
2. The red light is always on when charging the headset, and the blue light is always on when charging the headset. The charging chamber is off when fully charged.

Charge the charging chamber

Please use the mobile phone adapter to charge the charging chamber. You can use the computer Type-C cable or other chargers with a Type-C interface.

Safety precautions

For high-quality earphones, please refer to the following instructions to prolong the service life:

• Please keep away from high temperature, high humidity, and corrosive environments.
• Please prevent the product from being hit, dropped, bent, soaked, etc.
• Please do not remove the headset or charging stand.
• Please do not allow the product to be overcharged all the time, so as to reduce the service life of the product.
• If it causes any discomfort or pain, please stop using this product.
• Use a DC 5V-1A adapter certified by a regulated manufacturer.

Repeated charging and discharging of the headset will cause the battery performance to decrease over time, which is normal for all rechargeable electronic products.

Package Contents

• Two Bluetooth headsets
• One charging base
• One Type-C charging line
• One manual