Introduction
The Mircom UDACT-2200 is a dual-line digital dialer designed to communicate alarm, supervisory, and trouble conditions to a Central Station using Contact ID or SIA communication formats. It supports the FX-2200 Fire Panel and requires the FX_V21 or greater programmer for configuration.
Key features include support for all zone and panel conditions, multiple communication formats (SIA, Contact ID, Pager), three programmable telephone numbers, event buffering, and swinger shutdown options.
Installation and Wiring
This section details the unpacking, mounting, and wiring of the UDACT-2200. It emphasizes the importance of proper standby power calculations and adherence to national and local electrical codes. The dialer connects to the main panel via a Secur-bus and requires two telephone line connections.
Operation and Programming
The manual describes the UDACT-2200's LED indicators for status monitoring and its communication protocols with the Fire Alarm Control Panel and telephone lines. Programming is performed using the FX_V21 or greater software, allowing for detailed configuration of communication options, reporting codes, and dialing parameters.
Appendices and Compliance
Appendices provide tables of reporting codes for Contact ID and SIA formats, as well as a list of compatible receivers. The document also includes warranty information, warnings regarding system limitations and potential failures, and FCC compliance statements.
For technical support, Mircom can be contacted at 905-660-4655 or 1-888-660-4655. Further product information is available on their website: www.mircom.com.
