RenewAire EV 90 Energy Recovery Ventilator

Specifications and Dimensions

Product Overview

The RenewAire EV 90 is an indoor unit for Energy Recovery Ventilation (ERV) systems, suitable for residential and light commercial applications. It features a static plate design for heat and humidity transfer, with a typical airflow range of 40-110 CFM.

Certifications: HVI Tested/Certified per CSA C439 Protocol using one L-35-G5 Core.

Specifications

Ventilation Type Static plate, heat and humidity transfer Units Per Pallet 10
Typical Airflow Range 40-110 CFM Motor(s) Qty. 2, Standard motorized impeller blowers
Standard Features White painted cabinet, Line-cord power supply, Low-voltage circuit for controls, Unit may be mounted in any orientation, Cross-core differential pressure ports Accessories Backdraft damper (6", 8"), Automatic balancing damper (4", 5", 6"), Motorized Dampers (6", 8"), Concentric Vent (6"), Louvered wall vent (6"), Digital time clock (wall/exterior mount), Carbon dioxide sensor/control (wall/duct mount), IAQ sensor (wall/duct mount), Motion occupancy sensor/control (ceiling/wall mount), Percentage timer control (PTL), Push-button point-of-use controls (PBL), Percentage timer control with furnace interlock (FM), MERV 13 filter (OA airstream), Electric duct heater (RH series)
Control Onboard 24VAC transformer/relay package
Filters Total qty. 2, MERV 8, spun-polyester media: 9 5/8" x 10 1/2" x 1"
Unit Weight 36 lbs.
Max. Shipping Dimensions & Weight (in carton) 29" L x 22" W x 15" H, 40 lbs.

Electrical Data

HP Volts Hz Phase Watts FLA
0.03 120 60 Single 46 @ 90 CFM 0.35

Unit Performance

Unit Performance Core Performance
Airflow (CFM) External Static Pressure (Inches Water Column) Airflow (CFM) Temp EFF% Total EFF% Winter/Summer
36 0.60 36 78 75/65
53 0.50 53 74 69/58
68 0.40 68 70 65/53
81 0.30 81 67 61/49
93 0.20 93 64 58/45
108 0.10 108 61 55/42

Note: These are core-only ratings and are not HVI certified. Total EFF% calculated at 35/33wb OA and 70/58wb RA (winter) and 98/78wb OA and 75/63wb RA (summer). HVI ratings apply to complete units only. This unit is HVI certified. See HVI certified ratings on pg. 47 of Single/Multi-Family Catalog and at hvi.org.

Unit Dimensions

Airflow Orientation

Available as shown in dimension drawing.

Unit Mounting & Application

Can be mounted in any orientation. RA/EA airstream can be switched with OA/SA airstream.

Top View

Diagram Description: Top view of the EV 90 unit showing duct connections and dimensions. Includes 2 1/4" typical overall height, 18" case height, 24V AC Control Terminal, and 34" line cord.

[Top View Diagram]

Left View

Diagram Description: Left side view of the EV 90 unit. Shows dimensions for the case, formed inlet ring, OA (Outside Air) and EA (Exhaust Air) connections (6" nominal typical), and SA (Supply Air) and RA (Room Air) connections (8" nominal typical). Also indicates pressure ports.

[Left View Diagram]

Front View

Diagram Description: Front view of the EV 90 unit. Shows the overall case dimensions, door swing, and pressure ports.

[Front View Diagram]

Right View

Diagram Description: Right side view of the EV 90 unit. Highlights a minimum 10 1/8" service area required for door removal and access. Shows overall case and door dimensions.

[Right View Diagram]

Abbreviations:

  • EA: Exhaust Air to outside
  • OA: Outside Air intake
  • RA: Room Air to be exhausted
  • SA: Supply Air to inside

Installation Orientation:

Unit may be installed in any orientation.

Notes:

  1. Unless otherwise specified, dimensions are rounded to the nearest eighth of an inch.
  2. Specifications may be subject to change without notice.
Models: EV90 Energy Recovery Ventilator, EV90, Energy Recovery Ventilator, Recovery Ventilator, Ventilator

File Info : application/pdf, 1 Pages, 215.89KB

PDF preview unavailable. Download the PDF instead.

Submittal-EV90-Jun2024

References

Adobe PDF Library 17.0

Related Documents

Preview RenewAire SL 75 EC Motor Energy Recovery Ventilator Specifications & Dimensions
Detailed specifications, performance data, electrical information, and dimensional drawings for the RenewAire SL 75 low-profile, multi-family residential/light commercial Energy Recovery Ventilator with EC Motor.
Preview RenewAire EV 130 Energy Recovery Ventilator Specifications and Dimensions
Explore the technical specifications, performance data, and dimensions for the RenewAire EV 130 Energy Recovery Ventilator. This HVI-certified unit is ideal for residential and light commercial HVAC systems, offering efficient air exchange and energy recovery.
Preview RenewAire EV 200 Energy Recovery Ventilator: Specifications & Dimensions
Technical specifications, performance data, and dimensional details for the RenewAire EV 200 Energy Recovery Ventilator (ERV), an indoor unit designed for residential and light commercial applications.
Preview RenewAire HE07IN EC Motor Energy Recovery Ventilator Specifications and Dimensions
Detailed specifications, dimensions, and performance data for the RenewAire HE07IN EC Motor Energy Recovery Ventilator. Includes airflow ranges, motor options, electrical data, and unit mounting information.
Preview RenewAire PA-6XIN ERV: Product Specifications
Detailed technical specifications for the RenewAire PA-6XIN Energy Recovery Ventilator (ERV), covering product features, installation, quality assurance, and performance criteria.
Preview RenewAire EV 130 Energy Recovery Ventilator Specifications and Dimensions
Detailed specifications, performance data, and dimensional drawings for the RenewAire EV 130 Energy Recovery Ventilator, a residential/light commercial unit designed for heat and humidity transfer.
Preview MD Series Motorized Dampers (6" & 8") - RenewAire Product Data
Detailed specifications, applications, and selection guide for RenewAire's MD Series Motorized Dampers, designed for energy recovery ventilators (ERVs) and HVAC systems.
Preview Ventilateurs à Récupération d'Énergie Série HE RenewAire
Découvrez les ventilateurs à récupération d'énergie (ERV) de la série HE de RenewAire, conçus pour améliorer la qualité de l'air intérieur (QAI), réduire les coûts énergétiques et favoriser des environnements sains et productifs dans les bâtiments commerciaux. Ces unités offrent une récupération totale d'énergie, des moteurs à haut rendement, et une conception flexible pour diverses applications.