Redmi Pad 2 Quick Start Guide

Getting Started

Press and hold the power button to turn on the device. Follow the on-screen instructions to set up your device.

For more information, visit our official website: www.mi.com/global/service/userguide

Electrical and Electronic Equipment Waste (WEEE)

Special precautions should be taken to dispose of this product safely. This mark indicates that this product cannot be disposed of with other household waste in the EU. To prevent harm to the environment or human health from improper waste disposal and to promote the sustainable reuse of material resources, please recycle responsibly.

To safely recycle the device, use the return and collection systems or contact the retailer from whom you originally purchased the device.

PRECAUTION

RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

To avoid possible hearing damage, do not listen to music at a high volume level for prolonged periods.

You can access additional safety and precautions information at the following link: www.mi.com/en/certification

Important Safety Information

Read all safety information presented below before using the device:

• Using unauthorized power adapters or batteries may cause fires, explosions, or other risks.
• Use only authorized accessories that are compatible with your device.
• The operating temperature range for this device is 0 °C to 40 °C. Using this device in an environment outside this temperature range may damage it.
• If the device has a built-in battery, do not attempt to replace it yourself to avoid damaging the battery or the device.
• Charge this device only with the included or authorized power cable and adapter. Using other adapters may cause fires, electric shocks, and damage to the device and adapter.
• Once charging is complete, disconnect the adapter from the device and the power outlet. Do not charge the device for more than 12 hours.
• The battery must be recycled or disposed of separately from household waste. Improper handling of the battery may cause fires or explosions. Dispose of or recycle the device, battery, and accessories in accordance with local regulations.
• Do not disassemble, strike, crush, or incinerate the battery. If the battery appears deformed or damaged, stop using it immediately.
• Do not short-circuit the battery, as this may cause overheating, burns, or other injuries.
• Do not place the battery in a high-temperature environment. Overheating may cause explosions.
• Do not disassemble, strike, or crush the battery, as this could cause battery leakage, overheating, or explosion.
• Do not incinerate the battery, as this could cause a fire or explosion.
• If the battery appears deformed or damaged, stop using it immediately.
• The user should not remove or alter the battery. Only an authorized repair center of the manufacturer can perform battery removal or repair.
• Keep your device dry.
• Do not attempt to repair the device yourself. If any part of the device does not function correctly, contact Mi customer support or take your device to an authorized repair center.
• Connect other devices according to their instruction manuals. Do not connect devices that are incompatible with this device.
• For AC/DC adapters, the socket-outlet shall be installed near the equipment and shall be easily accessible.

! Safety Precautions

• Observe all applicable laws and regulations that restrict the use of the tablet in specific situations and environments.
• Do not use the tablet in service stations or in explosive or potentially explosive environments, including fuel-loading areas, areas below the deck of ships, facilities for the transfer or storage of fuel or chemicals, or areas where the air may contain particles or chemicals such as grains, dust, or metal dust. Obey all signs for switching off wireless devices, such as your tablet or other radio equipment. Turn off your tablet or wireless device when in blasting areas or in places where "two-way radios" or "electronic devices" should be turned off to prevent possible accidents.
• Do not use your tablet in operating rooms, emergency rooms, or hospital intensive care units. Always comply with all hospital and healthcare facility rules and regulations. If you have a medical device, consult your doctor and the device manufacturer to determine if your tablet may interfere with the operation of the device. To avoid possible interference with a pacemaker, always maintain a minimum distance of 15 cm between the tablet and the pacemaker. To avoid interference with medical equipment, do not use your tablet near hearing aids, cochlear implants, or other similar devices.
• Observe all aircraft safety regulations and turn off your tablet while on board aircraft when necessary.
• When driving a vehicle, use your tablet in accordance with applicable traffic laws and regulations.
• To avoid being struck by lightning, do not use your tablet outdoors during thunderstorms.
• Do not use your tablet in highly humid places, such as bathrooms. Doing so may cause electric shocks, injuries, fires, and damage to the charger.

Safety Declaration

Update your tablet's operating system using the built-in software update feature or visit any of our authorized service points. Updating the software through other means may damage the device or cause data loss, security issues, and other risks.

EU Regulations

Declaration of Conformity with RED

Xiaomi Communications Co., Ltd. hereby declares that this tablet with Bluetooth and Wi-Fi 25040RP0AL complies with the essential requirements and other relevant provisions of the Radio Equipment Directive (RED) 2014/53/EU. The full text of the EU Declaration of Conformity is available at the following Internet address: www.mi.com/en/certification

Radio Frequency Exposure Information (SAR)

This device complies with the specific absorption rate (SAR) limits for the general population/uncontrolled exposure (10-gram SAR, localized for trunk, limit: 2.0 W/kg) specified in the council recommendation 1999/519/EC, the guidelines of the International Commission on Non-Ionizing Radiation Protection (ICNIRP), and the RED (Directive 2014/53/EU).

During SAR testing, this device was configured to transmit at its highest certified power level in all tested frequency bands. When the device is placed close to the body, a belt clip or a case that does not contain metal components should be used. Compliance with radio frequency exposure was not tested or certified with any accessory containing metal worn on the body, so the use of such body-worn accessories should be avoided.

Legal Information

This device can be operated in all EU member states. Observe national and local regulations where the device is used.

This device is restricted for indoor use only when operating in the frequency range of 5250 to 5350 MHz in: AT, BE, BG, HR, CY, CZ, DK, EE, FI, FR, DE, EL, HU, IE, IT, LV, LT, LU, MT, NL, PL, PT, RO, SK, SI, ES, SE, UK(NI), IS, LI, NO, CH, TR.

Wi-Fi connectivity (including Wi-Fi frequency bands, Wi-Fi standards, and other features as ratified in the IEEE 802.11 standard specifications) may vary depending on regional availability and local network compatibility. The feature can be added via OTA when and where applicable.

Ensure that the power adapters used comply with the applicable country regulations and international and regional safety standards.

Frequency Bands and Power

This tablet offers the following frequency bands, only in EU regions, and maximum radio frequency powers:

• Bluetooth: 20 dBm
• 2.4 GHz Wi-Fi band: 20 dBm
• 5 GHz Wi-Fi: 5150 to 5250 MHz: 23 dBm, 5250 to 5350 MHz: 23 dBm, 5470 to 5725 MHz: 23 dBm, 5725 to 5850 MHz: 14 dBm

FCC Regulations

This tablet complies with Part 15 of the Federal Communications Commission (FCC) Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This tablet has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used according to instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation distance between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Radio Frequency Exposure Information (SAR)

This device complies with government requirements regarding radio wave exposure. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy. The exposure standard for wireless devices employs a unit of measurement known as the specific absorption rate or SAR.

The SAR limit established by the FCC is 1.6 W/kg. For body-worn use, this device has been tested and meets FCC RF exposure guidelines when used with an accessory that does not contain metal. RF exposure compliance with any body-worn accessory containing metal has not been tested or certified, and therefore, the use of such body-worn accessories should be avoided.

FCC Note

Changes or modifications not expressly approved by the party responsible for compliance may void the user's authority to operate the equipment. Shielded cables must be used with this unit to ensure compliance with FCC Class B limits.

Electronic Label

This device has an electronic label that provides certification information. To access it, go to Settings > About tablet > Certification or open Settings and type "Certification" in the search bar.

Certification Information (Highest SAR)

• SAR Limit 10 g: 2.0 W/kg
• SAR: Body: 0.95 W/kg (distance 0 mm).
• SAR Limit 1 g: 1.6 W/Kg
• Body-worn portable: 1.10 W/Kg (distance 0 mm).

Model: 25040RP0AL

2504 indicates that this product will be launched after 202504.

NOM

The operation of this device is subject to the following conditions:

1. This equipment or device may not cause harmful interference.
2. This equipment or device must accept any interference, including that which may cause undesired operation.

CONNECTION INSTRUCTIONS:

1. To connect your cellular tablet to electrical power and recharge the internal battery, use only your battery charger provided with the equipment.
2. Connect the USB cable to the tablet's USB port.
3. Connect the USB cable to the battery charger's USB port.
4. Connect the charger to a mains power outlet (100-240 V~).
5. To disconnect the charger when the battery is recharged, hold the charger firmly and remove it from the AC outlet, never pull the cable.

Using FM Radio

For the FM Radio function, press the "Home"/"Tools"/"FM Radio" button; headphones must be connected as they function as an antenna.

Power: 5V = 3A

Adapter:

Input: 100 -240V~, 50/60Hz, 0.5 A

Output: 5V = 3A

Cell Broadcast (CBS)

Cell Broadcast (CBS) is a function that offers SMS decoding, supports geofencing for emergency and non-emergency wireless alerts, and presents information to end-users based on regional and mobile carrier regulations. To access the CBS configuration menu, go to Settings > Security and emergency > Wireless emergency alerts, and select the "enabled" or "disabled" options to receive or not receive the corresponding alerts.

Legal Notice

This quick start guide is published by Xiaomi or its local affiliate. If necessary, Xiaomi may make improvements or changes related to typographical errors or current inaccurate information in this guide, or improvements to programs or equipment, without prior notice and at any time. Such changes, however, will be incorporated in new online editions of this quick start guide (see details at www.mi.com/global/service/userguide).

All images are for reference only and may not accurately represent the actual device.

Manufacturer: Xiaomi Communications Co., Ltd.

Manufacturer's postal address: #019, 9th Floor, Building 6, 33 Xi'erqi Middle Road, Haidian District, Beijing, China, 100085

Electronic Tablet

Brand: Redmi

Model: 25040RP0AL

All rights reserved by Xiaomi Inc.