Redmi Pad SE 8.7 4G Quick Start Guide

Getting Started

Thank you for choosing the Redmi Pad SE 8.7 4G.

Long press the power button to turn on the device. Follow the on-screen instructions to configure the device.

For more information, visit the official website: www.mi.com/global/service/userguide

About SIM Card

Please do not insert non-standard SIM cards into the SIM card slot, as they may damage the SIM card slot.

WARNING: Do not disassemble this device.

Device Overview

The Redmi Pad SE 8.7 4G features the following components:

• SIM & SD Card Tray: Located on the side of the device.
• Volume Buttons: Used to adjust the audio volume.
• Power Button: Used to turn the device on/off and lock/unlock the screen.
• USB Type-C Port: For charging and data transfer, located on the bottom edge.

The SIM tray accommodates:

• Nano-SIM (x2)
• Micro SD card

Environmental Information (WEEE)

This symbol [symbol for waste electrical and electronic equipment] indicates that this product must not be discarded with other household waste in the EU. To prevent harm to the environment or human health from inappropriate waste disposal, and to promote sustainable reuse of material resources, please recycle responsibly.

To safely recycle your device, please use return and collection systems or contact the retailer where the device was originally purchased.

Important Safety Information

Read all safety information below before using your device:

• Use of unauthorized cables, power adapters, or batteries can cause fire, explosion, or pose other risks.
• Use only authorized accessories compatible with your device.
• The device's operating temperature range is 0°C to 40°C. Using the device outside this range may cause damage.
• If your device has a built-in battery, do not attempt to replace it yourself to avoid damage.
• Charge this device only with the included or authorized cable and power adapter. Other adapters may cause fire, electric shock, or damage.
• After charging, disconnect the adapter from the device and the power outlet. Do not charge for more than 12 hours.
• Batteries must be recycled or disposed of separately from household waste. Mishandling may cause fire or explosion. Dispose of or recycle according to local regulations.
• Do not disassemble, hit, crush, or burn the battery. If deformed or damaged, stop using immediately.
• Do not short-circuit the battery, as this may cause overheating, burns, or injury.
• Do not place the battery in a high-temperature environment.
• Overheating may cause explosion.
• Do not disassemble, hit, or crush the battery, as this may cause it to leak, overheat, or explode.
• Do not burn the battery, as this may cause fire or explosion.
• If the battery appears deformed or damaged, stop using it immediately.
• Users shall not remove or alter the battery. Removal or repair must be done by an authorized repair center.
• Keep your device dry.
• Do not attempt to repair the device yourself. Contact customer support or an authorized repair center if any part malfunctions.
• Connect other devices according to their manuals. Do not connect incompatible devices.
• For AC/DC adapters, the socket-outlet shall be installed near the equipment and be easily accessible.

Safety Precautions

Observe all applicable laws and rules restricting tablet use in specific situations and environments.

• Do not use your tablet at petrol stations or in any explosive atmosphere or potentially explosive environment (e.g., fueling areas, below decks on boats, fuel/chemical transfer/storage facilities, or areas with airborne chemicals/particles like grain, dust, or metal powders). Obey posted signs to turn off wireless devices. Turn off your tablet in blasting areas or areas requiring "two-way radios" or "electronic devices" to be off.
• Do not use your tablet in hospital operating rooms, emergency rooms, or intensive care units. Always comply with hospital and health center rules. If you have a medical device, consult your doctor and the manufacturer to determine if your tablet may interfere. Maintain a minimum distance of 15 cm between your tablet and a pacemaker. Avoid use near hearing aids, cochlear implants, or similar devices.
• Observe all aircraft safety regulations and turn off your tablet on board aircraft when required.
• When driving, use your tablet in accordance with traffic laws and regulations.
• To avoid lightning strikes, do not use your tablet outdoors during thunderstorms.
• Do not use your tablet to make calls while it is charging.
• Do not use your tablet in high humidity places (e.g., bathrooms). Doing so may result in electric shock, injury, fire, and charger damage.

Security Statement

Please update your tablet's operating system using the built-in software update feature, or visit authorized service outlets. Updating software through other means may damage the device or result in data loss, security issues, and other risks.

EU Regulations

RED Declaration of Conformity

Xiaomi Communications Co., Ltd. declares that this GSM / GPRS / EDGE / UMTS / LTE Tablet with Bluetooth and Wi-Fi 24076RP19G complies with the essential requirements and other relevant provisions of the RE Directive 2014/53/EU. The full text is available at: www.mi.com/en/certification

RF Exposure Information (SAR)

This device complies with Specific Absorption Rate (SAR) limits for general population/uncontrolled exposure (Localized 10-gram SAR for trunk, limit: 2.0W/kg) specified in Council Recommendation 1999/519/EC, ICNIRP Guidelines, and RED (Directive 2014/53/EU).

During SAR testing, the device transmitted at its highest certified power level in all tested frequency bands.

When attaching the device near the body, use a belt clip or holster without metallic components. RF exposure compliance was not tested or certified with any accessory containing metal worn on the body, and such accessories should be avoided.

Certification Information (Highest SAR)

• SAR 10 g limit: 2.0 W/Kg
• SAR Value: Head: 0.883 W/Kg, Body: 0.991 W/Kg (0 mm distance).

Legal Information

This device may be operated in all EU member states. Observe national and local regulations.

This device is restricted to indoor use only when operating in the 5250 to 5350 MHz frequency range in: AT,BE,BG,HR,CY,CZ,DK,EE,FI,FR,DE,EL,HU,IE,IT,LV,LT,LU,MT,NL,PL,PT,RO,SK,SI,ES,SE,UK(NI),IS,LI,NO,CH,TR.

This device is restricted to indoor use only when operating in the 5150 to 5350MHz in Hong Kong.

Wi-Fi connectivity may vary based on regional availability and local network support. Functions may be added via OTA.

Restrictions in the 2.4 GHz band: Norway: This subsection does not apply within a 20 km radius of Ny-Ålesund.

Ensure power adapters comply with applicable country regulations and international/regional safety standards.

Frequency Bands and Power

FCC Regulations

This tablet complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This tablet has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used per instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment causes harmful interference to radio or television reception (which can be determined by turning the equipment off and on), the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF Exposure Information (SAR)

This device meets the government's requirements for exposure to radio waves. It is designed and manufactured not to exceed emission limits for RF energy exposure. The exposure standard for wireless devices uses Specific Absorption Rate (SAR).

The SAR limit set by the FCC is 1.6 W/Kg. For body-worn operation, this device has been tested and meets FCC RF exposure guidelines for use with an accessory that contains no metal. RF exposure compliance with any body-worn accessory containing metal was not tested or certified, and use of such accessories should be avoided.

FCC Note

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Shielded cables must be used with this unit to ensure compliance with the Class B FCC limits.

UK Regulations

Declaration of Conformity

Xiaomi Communications Co., Ltd. declares that this GSM / GPRS / EDGE / UMTS / LTE Tablet with Bluetooth and Wi-Fi 24076RP19G complies with the essential requirements and other relevant provisions of the UK Radio Equipment Regulations 2017 (SI 2017/1206). The full text is available at: www.mi.com/en/certification

RF Exposure Information (SAR)

This device complies with Specific Absorption Rate (SAR) limits for general population/uncontrolled exposure (Localized 10-gram SAR for trunk, limit: 2.0W/kg) specified in Council Recommendation 1999/519/EC, ICNIRP Guidelines, and UK Radio Equipment Regulations 2017 (SI 2017/1206).

During SAR testing, the device transmitted at its highest certified power level in all tested frequency bands.

When attaching the device near the body, use a belt clip or holster without metallic components. RF exposure compliance was not tested or certified with any accessory containing metal worn on the body, and such accessories should be avoided.

Certification Information (Highest SAR)

• SAR 10 g limit: 2.0 W/Kg
• SAR Value: Head: 0.883 W/Kg, Body: 0.991 W/Kg (0 mm distance).

Legal Information

Observe national and local regulations where the device is used.

This device is restricted to indoor use only when operating in the 5250 to 5350 MHz frequency range in: AT,BE,BG,HR,CY,CZ,DK,EE,FI,FR,DE,EL,HU,IE,IT,LV,LT,LU,MT,NL,PL,PT,RO,SK,SI,ES,SE,UK(NI),IS,LI,NO,CH,TR.

This device is restricted to indoor use only when operating in the 5150 to 5350MHz in Hong Kong.

Wi-Fi connectivity may vary based on regional availability and local network support. Functions may be added via OTA.

Ensure power adapters comply with applicable country regulations and international/regional safety standards.

Frequency Bands and Power: This tablet offers the same frequency bands and power levels as listed under EU Regulations.

E-label

This device has an electronic label for certification information. To access it, go to Settings > About tablet > Certification, or open Settings and type "Certification" into the search bar.

Model: 24076RP19G

2407 indicates that this product will be launched after 202407.

Disclaimer

This quick start guide is published by Xiaomi or its local affiliated company. Improvements and changes to this guide necessitated by typographical errors, inaccuracies of current information, or improvements to programs and/or equipment, may be made by Xiaomi at any time and without notice. Such changes will, however, be incorporated into new online editions of the quick start guide (please see details at www.mi.com/global/service/userguide).

All illustrations are for illustration purposes only and may not accurately depict the actual device.

Manufacturer Information

Manufacturer: Xiaomi Communications Co., Ltd.

Manufacturer postal address: #019, 9th Floor, Building 6, 33 Xi'erqi Middle Road, Haidian District, Beijing, China, 100085

Authorized UK Representative:

Name: Xiaomi Technology UK Limited

Address: 100 Brook Drive Green Park, Unit Part Ground Floor, North Wing, Reading, England, RG2 6UJ

Brand: Redmi

Model: 24076RP19G

© Xiaomi Inc. All rights reserved.