Yaheetech 592071 Mobile TV Stand
Introduction and Safety Information
Please read this instruction manual carefully before attempting to install.
We recommend 1 or more people to install.
The expected assembly time is approximately 1 hour.
This product is not intended for use by children. ??
Keep away from fire or other heat sources. ?
We recommend wearing protective gloves during assembly. ?
Please follow the instruction manuals and use a pad to avoid damage during assembly. Do not place the product on uneven floors.
Parts List
| Part | Description | Quantity |
|---|---|---|
| 1 | TV Mounting Plate | x1 |
| 2 | Left Support Arm | x1 |
| 3 | Right Support Arm | x1 |
| 4 | Middle Shelf | x1 |
| 5 | Casters | x4 |
| 6 | Main Pole | x1 |
| 7 | Base Connector | x1 |
| 8 | Base Leg | x2 |
| 9 | Base Leg | x2 |
| 10 | Shelf Bracket | x1 |
| 11 | Pole Connector | x1 |
| 12 | Cable Management Clip | x1 |
| 13 | Pole Mount Bracket | x1 |
| A | Allen Wrench | x1 |
| B | Wrench | x1 |
| C | Screw M6*12mm | x6 |
| D | Screw M8*20mm | x12 |
| E | Screw M8*60mm | x2 |
| F | Nut M6 | x4 |
| G | Wing Nut | x2 |
| H | Washer | x2 |
| I | Knob | x2 |
| S1 | Screw M6*12mm | x4 |
| S2 | Screw M6*35mm | x4 |
| S3 | Screw M8*15mm | x4 |
| S4 | Screw M8*50mm | x4 |
| S5 | Flat Spacer | x4 |
| S6 | Cylindrical Spacer | x8 |
| S7 | Cylindrical Spacer | x4 |
Assembly Instructions
Step 1: Assemble Base Legs
Attach two casters (5) to each of the two base legs (8). Attach two casters (5) to each of the two base legs (9).
Step 2: Assemble Base and Main Pole
Connect the two base legs (8) and two base legs (9) to the base connector (7) using eight screws (D). Then, insert the pole connector (11) into the base connector (7) and attach the main pole (6) to the pole connector (11).
Step 3: Mount Shelf and Brackets
Mount the shelf bracket (10) onto the main pole (6). Attach the middle shelf (4) to the shelf bracket (10) using two screws (C) and two washers (H). Attach the pole mount bracket (13) to the main pole (6) using four screws (C).
Step 4: Attach Cable Management
Attach the cable management clip (12) to the main pole (6) using two screws (E) and two wing nuts (G).
Step 5: Attach TV Mounting Plate
Attach the TV mounting plate (1) to the main pole (6) using four screws (D) and four nuts (F).
Step 6: Attach Support Arms to Plate
Attach the left support arm (2) and the right support arm (3) to the TV mounting plate (1). Remove the pre-installed nuts from the support arms and secure them using the knobs (I).
Step 7: Attach Support Arms to TV
Attach the support arms (2 and 3) to the back of your TV. Select the appropriate screws (S1, S2, S3, S4) and plastic spacers (S6, S7) from the provided hardware that best fit your TV's mounting holes. Ensure screws are tightened firmly but not excessively. The TV must not exceed 25 kg. If provided hardware is unsuitable, source alternatives from local hardware stores. Use plastic spacers (S6, S7) if mounting holes are shallow to prevent damage. The flat plastic pieces (S5) may also be used as needed.
Step 8: Connect TV to Stand
Align and connect the support arms (2 and 3) attached to the TV with the TV mounting plate (1) on the stand. Ensure a secure connection.
Support and Contact
For assistance or further information, please contact Yaheetech support at help@yaheetech.shop.
Manufactured in PRC for Yahee GmbH. Importer: Yahee GmbH, Hans-Grüninger-Weg 11, 71706 Markgröningen. Visit www.yaheetech.de.
A downloadable user manual can be obtained from the Yaheetech website.
