Yaheetech 613633 TV Stand Assembly Instructions
Model Number: 613633
Important Information Before Assembly
Please read this instruction manual carefully before attempting to install.
Assembly Recommendations:
- We recommend 1 or more people to install. ???
- Estimated assembly time: 1 hour. ⏱️
- This product is not intended for use by children. ??
- Keep away from fire or other heat sources. ?❌
- We recommend wearing protective gloves. ?
Preparation:
Please follow the instruction manuals and use a pad or protective cover to avoid damage to the product and the floor during assembly. [Diagram Description: One illustration shows a person attempting to place a bucket on the floor near a box, marked with a red cross [❌]. The second illustration shows a person placing a protective mat on the floor near a box, marked with a green checkmark [✔️].]
Parts List
| Part | Description | Quantity |
|---|---|---|
| 1 | Top Panel | x1 |
| 2 | Bottom Panel | x1 |
| 3 | Left Side Panel | x1 |
| 4 | Right Side Panel | x1 |
| 5 | Middle Shelf | x1 |
| 6 | Back Panel | x2 |
| 7 | Side Support (X-frame) | x2 |
| 8 | Support Bar | x2 |
Hardware
| ID | Description | Quantity |
|---|---|---|
| A | Cam Bolt | x4 |
| B | Cam Lock | x4 |
| C | Wooden Dowel | x12 |
| D | Screw M6*45mm | x8 |
| E | Screw M6*30mm | x6 |
| F | Screw M6*35mm | x4 |
| G | Screw M6*45mm | x4 |
| H | Adjustable Foot | x4 |
| I | Allen Key | x1 |
Assembly Steps
Step 1
Attach panels 3 and 4 to the middle shelf (5) using wooden dowels (C) and screws (D). [Diagram Description: Shows panels 3, 4, and 5 being joined. Dowels (C) are inserted into holes, and screws (D) are driven through panel 3 and 4 into panel 5.]
Parts Used: 3 (x1), 4 (x1), 5 (x1), C (x4), D (x8)
Step 2
Attach the back panel (6) to the assembled structure from Step 1. [Diagram Description: Shows back panel (6) being slid into place or attached to the rear of the structure formed by panels 3, 4, and 5.]
Parts Used: 6 (x1)
Step 3
Insert cam bolts (A) into the pre-drilled holes on the top panel (1). [Diagram Description: Shows cam bolts (A) being screwed into the underside of the top panel (1).]
Parts Used: 1 (x1), A (x4)
Step 4
Connect panels 3 and 4 to the top panel (1). Insert wooden dowels (C) into the top edges of panels 3 and 4. Align these with the holes on the underside of panel 1. Secure by inserting cam locks (B) into the corresponding holes on panels 3 and 4 and turning them to lock onto the cam bolts (A). [Diagram Description: Shows panels 3 and 4 being attached to panel 1. Cam bolts (A) from panel 1 engage with cam locks (B) on panels 3 and 4. Dowels (C) are also shown.]
Parts Used: 1 (x1), 3 (x1), 4 (x1), B (x4), C (x4)
Step 5
Attach the second back panel (6) to the top panel (1). [Diagram Description: Shows the second back panel (6) being attached to the top of the structure.]
Parts Used: 6 (x1)
Step 6
Attach the support bars (8) to the underside of the bottom panel (2) using screws (E). [Diagram Description: Shows two support bars (8) being screwed onto the bottom panel (2) using screws (E).]
Parts Used: 2 (x1), 8 (x2), E (x6)
Step 7
Connect the main assembled body (from Step 5) to the bottom panel assembly (from Step 6). Insert wooden dowels (C) into the bottom edges of panels 3 and 4. Align these with holes on the bottom panel (2). Secure using screws (D) from the underside of panel 2 into panels 3 and 4. [Diagram Description: Shows the main cabinet structure being lowered onto the bottom panel assembly. Dowels (C) and screws (D) are used for connection.]
Parts Used: 2 (x1), 3 (x1), 4 (x1), 5 (x1), C (x4), D (x4)
Step 8
Attach the side supports (7) to the sides of the assembled unit. Secure them using screws (F) and (G). [Diagram Description: Shows the X-shaped side supports (7) being attached to the left and right sides of the main cabinet. Screws (F) and (G) are used for attachment.]
Parts Used: 7 (x2), F (x4), G (x4)
Step 9
Attach the adjustable feet (H) to the bottom of the side supports (7). [Diagram Description: Shows adjustable feet (H) being screwed into the bottom of the side supports (7).]
Parts Used: 7 (x2), H (x4)
Final Adjustments
Note: Screw in the adjustable feet to keep the table balanced. [Diagram Description: A close-up view shows an adjustable foot being screwed into the base of the unit, with circular arrows indicating rotation for height adjustment to achieve a level surface [↕️].]
Customer Support & Downloads
If you are not entirely satisfied with your purchase, please feel free to contact Yaheetech customer support using the following steps:
- Go to Your Orders.
- Find your order in the list.
- Select "Problem with order".
- Choose your topic from the list displayed.
- Select "Contact seller".
Manufacturer Information:
Manufactured in PRC for Yahee GmbH
Importer: Yahee GmbH
Höpfigheimer Straße 11.7
4321 Bietigheim-Bissingen
You can also download the electronic Installation Manual from the Product guides and documents section of the advertising page.
