Digital Kiosk USER'S GUIDE

MODEL:DC-A43ZN-A

VEVOR is committed to providing tools at competitive prices. Phrases like "Save Half" or "Half Price" represent an estimate of potential savings compared to major top brands and may not apply to all product categories. Customers are advised to verify savings carefully when placing an order.

NEED HELP? CONTACT US!

For product questions or technical support, please contact:

Technical Support and E-Warranty Certificate
www.vevor.com/support

This is the original instruction manual. Please read all instructions carefully before operating. VEVOR reserves the right to interpret the user manual. The appearance of the product is subject to the item received. VEVOR will not provide further notification for technology or software updates.

Safety and Compliance Information

Warning: To reduce the risk of injury, user must read instructions manual carefully.

FCC Information

CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment!

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This product may cause harmful interference.
2. This product must accept any interference received, including interference that may cause undesired operation.

WARNING: Changes or modifications to this product not expressly approved by the party responsible for compliance could void the user's authority to operate the product.

Note: This product has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This product generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this product causes harmful interference to radio or television reception (which can be determined by turning the product off and on), the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the distance between the product and receiver.
• Connect the product to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for assistance.

Correct Disposal

This product is subject to the provision of European Directive 2012/19/EC. The symbol showing a wheelie bin crossed through indicates that the product requires separate refuse collection in the European Union. This applies to the product and all accessories marked with this symbol. Products marked as such may not be discarded with normal domestic waste, but must be taken to a collection point for recycling electrical and electronic devices.

Important Safeguards

WARNING: Read all safety warnings, instructions, illustrations, and specifications provided with this digital kiosk. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious injury.

1. Do not use this product in areas where it may be exposed to water or other liquids.
2. Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning.
3. To reduce the risk of electric shock, do not disassemble this product. Take it to qualified service personnel when service or repair work is required. Opening or removing covers, such as the rear cover plate, may expose you to dangerous voltages or other risks. Incorrect re-assembly can cause electric shock when the appliance is subsequently used.
4. If the supply cord is damaged, it must be replaced by a special cord or assembly available from the manufacturer or its service agent. Only use the cable provided with the unit. The use of other cables may result in electric shock, fire, or cause serious damage to the unit.
5. Do not operate the unit in areas with high temperature or high humidity, as it may prevent it from working correctly.
6. When unplugging the power plug, do not pull it by the cord; grip the plug to pull it out. Not following these instructions may result in electric shock, fire, or damage to the unit.
7. Do not use the unit if the power cord is damaged or if the plug socket contact is loose. Not following these instructions may result in electric shock, fire, or other hazards.
8. Do not place heavy objects over the cord and do not bend it excessively, as it could get damaged. Not following these instructions may result in electric shock, fire, or other hazards.
9. When not using the unit for a long period, remove the power plug from the wall outlet.
10. This equipment is not suitable for use in locations where children are likely to be present.

SAVE THESE INSTRUCTIONS

Instructions

• The upgraded screen playback design allows simultaneous playback of pictures and videos, featuring an intelligent split-screen function to make your advertisements more attractive.
• Using Android 11 OS with powerful speakers, it supports U disk plug-and-play.
• The digital kiosk is widely used in commercial centers, airports, hospitals, restaurants, and various stores.

Easy to Publish Advertisement by USB Disk

Prepare the pictures and videos you want to display, ensuring they are suitable for the screen for optimal visual experience.

Picture and video size:

• 2K Screen: 1920*1080P (IMG/VIDEO)
• 4K Screen: 3840*2160P (IMG/VIDEO)

Copy the software "tpcl.exe" to the document where your pictures are prepared. The "tpcl.exe" software can be found on the USB disk in the accessory bag. This software helps ensure your pictures are correctly identified by the digital kiosk.

Run the "tpcl.exe" to process your pictures automatically.

When the picture processing is completed, press the "Enter" key to exit.

After processing, a new folder named "Modified_image" will be created, containing all the processed pictures.

Copy the pictures from the "Modified_image" folder to your USB disk.

Publish Advertisement by APP

Insert the USB disk into the digital kiosk and wait for auto-playing.

Send program by APP

1. Step 1: Download the app
   Scan the following QR code on your phone to download the Ledart app.

2. Step 2: Establish network connections
   Connect your phone to the device's Wi-Fi hotspot, or ensure both the device and phone are connected to the same Wi-Fi network.
3. Step 3: Edit program
   Create a program that matches the device, adding videos, pictures, and other materials.
4. Step 4: Send programs to devices

Publish Advertisement by Website

Click the corner or screen 4 times to enter setting mode.

Send program via cloud platform

1. Step 1: Set the device to cloud networking mode
   Navigate to the menu page, set the device to cloud networking mode in the system settings, and bind the relative server address and user. XiaoHui cloud server Address: Domestic: http://www.led-cloud.cn, Overseas: http://www.led-cloud.com.
2. Step 2: Login to the cloud platform
   Open the server address in a browser, and enter your username and password to log in.
3. Step 3: Edit program
   Create a program that matches the device, adding videos, pictures, and other materials.

Operation Instruction

Click the corner or screen 4 times to enter setting mode.

Navigation bar function keys: Swipe up at the bottom center of the screen to open the navigation bar. The function keys include: Volume [?], Back [◀️], Home [?], Switch applications [?️].

No programs can be played in the device until a new program is sent via the following methods:

Send programs via cloud platform

• Operation Steps: 1. Login cloud platform, 2. Create and edit programs, 3. Send programs to the device.
• Note: The device mode needs to be adjusted to networking mode and associated with the cloud platform account. Cloud server address: http://www.led-cloud.cn or http://www.led-cloud.com (international version).

Send programs via LedArt

• Operation Steps: 1. Run mobile APP LedArt, 2. Create and edit programs, 3. Send programs to the device.
• Note: The device mode needs to be adjusted to stand-alone mode, and the mobile phone must be in the same local area network. Scan and download APP.

Play programs via U-disk/SD card

• Operation Steps: 1. Save programs into U-disk or SD card, 2. Insert U-Disk or SD Card, 3. Playback programs automatically.
• Note: The device mode needs to be adjusted to stand-alone mode, and the file system format of the U-disk/SD card needs to be FAT32.

Connect Network

Play any of the four corners of the software interface, touch and click 4 times to enter the system settings.

Click to enter -> Network settings -> Wireless network, select the Wi-Fi to connect.

After connecting, click "Play now" to return to the playback interface.

Volume Control

Slide up the middle position at the bottom of the screen to open the navigation bar. Click the volume button [?], and the volume size can be adjusted by popping up on the right side.

Software Language Selection

System settings -> System language.

Advertisement Mode Selection

System settings -> System mode.

Click on System mode to select the desired mode.

System mode:

• Stand-alone: Stand-alone mode is played by inserting a USB drive (default setting).
• Networking: You can remotely control the publication of content (more information can be found in the video operation).
• LAN mode

Timing Switch Machine

Enter Magic Player Setting -> System Control -> Switch machine settings, as shown in the figure:

U disk playback setting

Magic Player Setting -> System Mode -> Select Stand-alone Mode:

There are two loading modes:

1. One is the copy mode, which copies the pictures or videos in the root directory of the U disk into the system and then plays them.
2. One is extended mode, which directly plays pictures or videos in the root directory of the U disk.

Installation Steps

Step A: Take out six screws and a hexagonal screwdriver.

Step B: Rotate the screen and lie down to align with the base.

Step C: Tighten the six screws.

Step D: Rotate the screen upright and plug it into the power supply.

Accessories List

• User's Guide * 1
• Power cord * 1
• USB flash drive * 1
• Screw * 8
• Roller * 4
• Key * 1

Matters Need Attention

If there is a hand pressing the screen, the touch screen operation will not be responded to at this time.

Scan the QR code for more installation and usage video information.

Manufacturer Information

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREET EASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UK REP: YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

EC REP: E-CrossStu GmbH Mainzer Landstr.69, 60329 Frankfurt am Main.