VEVOR
TOUGH TOOLS, HALF PRICE
Digital Kiosk USER'S GUIDE
MODEL: DC-A55ZN-A, DC-A65ZN-A
For Technical Support and E-Warranty Certificate, visit: www.vevor.com/support
Introduction
VEVOR is committed to providing tools with competitive prices. Expressions like "Save Half" or "Half Price" represent an estimate of potential savings compared to major top brands and may not apply to all product categories. Please verify savings carefully when placing an order.
This document is the original instruction manual. Please read all instructions carefully before operating the digital kiosk. VEVOR reserves the right to interpret this user manual. The appearance of the product is subject to the unit received. VEVOR will not provide separate notification for technology or software updates.
Safety Information
⚠️Warning: To reduce the risk of injury, user must read instructions manual carefully.
FCC Information
CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment!
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This product may cause harmful interference.
- This product must accept any interference received, including interference that may cause undesired operation.
WARNING: Changes or modifications to this product not expressly approved by the party responsible for compliance could void the user's authority to operate the product.
Note: This product has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This product generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this product does cause harmful interference to radio or television reception, which can be determined by turning the product off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the distance between the product and receiver.
- Connect the product to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for assistance.
Correct Disposal
This product is subject to the provision of European Directive 2012/19/EC. The symbol showing a wheelie bin crossed through ♻️ indicates that the product requires separate refuse collection in the European Union. This applies to the product and all accessories marked with this symbol. Products marked as such may not be discarded with normal domestic waste, but must be taken to a collection point for recycling electrical and electronic devices.
Important Safeguards
⚠️WARNING: Read all safety warnings, instructions, illustrations, and specifications provided with this digital kiosk. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious injury.
- Do not use this product in areas where it may be exposed to water or other liquids.
- Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning.
- To reduce the risk of electric shock, do not disassemble this product. Take it to qualified service personnel when service or repair work is required. Opening or removing covers, like the rear cover plate, may expose you to dangerous voltages or other risks. Incorrect re-assembly can cause electric shock when the appliance is subsequently used.
- If the supply cord is damaged, it must be replaced by a special cord or assembly available from the manufacturer or its service agent. Only use the cable provided with the unit. The use of other cables may result in electric shock, fire, or cause serious damage to the unit.
- Do not operate the unit in areas with high temperature or high humidity since it may prevent it from working correctly.
- When unplugging the power plug, do not pull it by the cord but rather grip the plug to pull it out. Not following these instructions may result in electric shock, fire, or damage to the unit.
- Do not use the unit if the power cord is damaged or if the plug socket contact is loose. Not following these instructions may result in electric shock, fire, or other hazards.
- Do not place heavy objects over the cord and do not bend it excessively since it could get damaged. Not following these instructions may result in electric shock, fire, or other hazards.
- When not using the unit for a long period of time, remove the power plug from the wall outlet.
- This equipment is not suitable for use in locations where children are likely to be present.
SAVE THESE INSTRUCTIONS
Product Features
- The upgraded screen playback design perfectly solves the problem of playing pictures and videos at the same time and realizes the intelligent split-screen function, which makes your ads more attractive.
- Using Android 11 OS with powerful speakers, supports U disk plug-and-play.
- The digital kiosk is widely used in commercial centers, airports, hospitals, restaurants, and all kinds of stores.
Content Publishing
Publishing via USB Disk
Follow these steps to publish your advertisement using a USB disk:
- Prepare the pictures and videos you want to display. Ensure they are suitable for the screen for a perfect visual experience. Recommended resolutions are 1920x1080P for 2K screens and 3840x2160P for 4K screens.
- Copy the software `tpcl.exe` to a document where your pictures are prepared. This software can be found on the USB disk included in the accessory bag.
- Run the `tpcl.exe` software. It is designed to ensure your pictures are identifiable by the digital kiosk and will process them automatically.
- When the picture processing is completed, press the "Enter" key to exit the software.
- A new folder named "Modified_image" will be created, containing all the processed pictures.
- Copy the pictures from the "Modified_image" folder to your USB disk.
Publishing via APP
Use the dedicated mobile application to manage and send content:
- Insert the USB disk into the digital kiosk.
- Download the app: Scan the QR code provided to download the Ledart app onto your smartphone.
- Establish network connections: Connect your phone to the device's Wi-Fi hotspot, or ensure both the device and your phone are connected to the same Wi-Fi network.
- Edit program: Create a program that suits the device, adding videos, pictures, and other materials.
- Send programs to devices: Transmit the created program to the digital kiosk.
Publishing via Website/Cloud Platform
Manage content remotely through the cloud platform:
- Set the device to cloud networking mode: Navigate to the menu page, select system mode, and set the device to cloud networking mode. Bind the relative server address and user.
- Cloud Server Addresses:
- Domestic: www.led-cloud.cn
- Overseas: www.led-cloud.com
- Login to the cloud platform: Open the server address in your web browser and log in using your username and password.
- Edit program: Create a program tailored for the device, incorporating videos, pictures, and other materials.
Operation Instructions
Accessing Settings
To enter the setting mode, click any of the four corners of the screen, or tap the screen four times consecutively.
Navigation Bar
Swipe up from the bottom center of the screen to open the navigation bar.
Function keys in the navigation bar:
- Volume ?
- Back ◀️
- Home ●
- Switch applications ?
Connecting to Network
To connect the device to a network:
- From the software interface, touch and click any of the four corners of the screen 4 times to enter the system settings.
- Navigate to "Network settings" and then "Wireless network".
- Select the desired Wi-Fi network to connect.
After connecting, click "Play now" to return to the playback interface.
Volume Control
To adjust the volume, slide up the middle position at the bottom of the screen to open the navigation bar, then click the volume button ?. The volume can be adjusted via the slider that appears on the right side.
Software Language Selection
Access "System settings" and select "System language" to change the device's language.
Advertisement Mode Selection
Access "System settings" and select "System mode" to choose the operating mode.
System Mode Details
Click on "System mode" to select the desired mode:
- Stand-alone: In this mode, content is played by inserting a USB drive. This is the default setting.
- Networking: This mode allows you to remotely control the publication of content. More information can be found in the video operation guide.
U Disk Playback Settings
Timing switch machine: Enter Magic Player Setting -> System Control -> Switch machine settings.
U disk playback setting: Navigate to Magic Player Setting -> System Mode -> Select Stand-alone Mode.
There are two loading modes for U disk playback:
- Copy mode: Copies the pictures or videos from the root directory of the U disk into the system and then plays them.
- Extended mode: Directly plays pictures or videos from the root directory of the U disk.
Installation Steps
Follow these steps to install the digital kiosk:
- Step A: Take out six screws and a hexagonal screwdriver.
- Step B: Rotate the screen and lie it down to align with the base.
- Step C: Tighten the six screws.
- Step D: Rotate the screen upright and plug it into the power supply.
Accessories List
- User's Guide * 1
- Power cord * 1
- USB flash drive * 1
- Screw * 8
- Roller * 4
- Key * 1
Matters Need Attention
- If there is a hand pressing the screen, the touch screen operation may not be responded to at this time.
- Scan the QR code for more installation and usage video information.
Manufacturer and Contact Information
Manufacturer: Shanghaimuxinmuyeyouxiangongsi
Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.
Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia
Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730
UK Representative: YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX
EU Representative: E-CrossStu GmbH Mainzer Landstr.69, 60329 Frankfurt am Main.
Contact Us â Official VEVOR Support
