Assembly Instructions
List of Pieces
The following table lists all the components included in the package. Please verify you have all parts before beginning assembly.
| Code | Description (English) | Description (Portuguese) | Amount | Length (in.) | Width (in.) | Thickness (in.) | Box |
|---|---|---|---|---|---|---|---|
| 01 | Right Side Panel | Lateral direita | 1 | 29.13" | 14.65" | .59" | A |
| 02 | Left Side Panel | Lateral esquerda | 1 | 29.13" | 14.65" | .59" | A |
| 03 | Right Divider | Divisória direita | 1 | 29.13" | 14.65" | .59" | A |
| 04 | Left Divider | Divisória esquerda | 1 | 29.13" | 14.65" | .59" | A |
| 05 | Top | Tampo | 1 | 46.46" | 15.35" | .59" | B |
| 06 | Side Panel-Upper | Lateral superior | 2 | 25.75" | 2.99" | .59" | B |
| 07 | Top | Chapéu | 1 | 46.46" | 3.03" | .59" | B |
| 08 | Back of Mirror | Costa do espelho | 1 | 46.46" | 26.38" | .59" | B |
| 09 | Baseboard | Rodapé | 4 | 10.08" | 3.15" | .59" | A |
| 10 | Crosspiece | Travessa | 1 | 23.86" | 3.15" | .59" | A |
| 11 | Support | Reforço | 1 | 23.86" | 10.08" | .59" | A |
| 12 | Larger Front of Drawer-Large | Frente de gaveta maior | 1 | 23.70" | 4.31" | .59" | A |
| 13 | Larger Front of Drawer-Small | Frente de gaveta menor | 2 | 11.10" | 4.31" | .59" | A |
| 14 | Right side of the smallest right-hand drawer | Lateral de gaveta menor direita | 3 | 13.78" | 3.15" | .59" | A |
| 15 | Left side of the smallest right-hand drawer | Lateral de gaveta menor esquerda | 3 | 13.78" | 3.15" | .59" | A |
| 16 | Back of Drawer-Large | Cabeceira de gaveta maior | 1 | 21.69" | 3.15" | .59" | A |
| 17 | Back of Drawer-Small | Cabeceira de gaveta menor | 2 | 7.91" | 3.15" | .59" | A |
| 18 | Front of Drawer-Largest | Frente do gavetão | 4 | 11.10" | 10.63" | .59" | A |
| 19 | Right Side of Drawer-Largest | Lateral do gavetão direita | 4 | 13.78" | 5.51" | .59" | A |
| 20 | Left Side of Drawer-Largest | Lateral do gavetão esquerda | 4 | 13.78" | 5.51" | .59" | A |
| 21 | Back of Drawer-Largest | Cabeceira do gavetão | 4 | 7.91" | 5.51" | .59" | A |
| 22 | Back Panel-Lower | Costa inferior | 2 | 29.31" | 10.87" | .12" | B |
| 23 | Base of Drawer-Small | Fundo de gaveta menor | 6 | 8.43" | 13.70" | .12" | B |
| 24 | Base of Drawer-Large | Fundo de gaveta maior | 1 | 22.20" | 13.70" | .12" | B |
Tip: We recommend you use the box that your furniture came in as the base for your workspace. This can help prevent accidental damage and unnecessary damages from occurring.
[Diagram showing a hand placing furniture parts on a cardboard box as a work surface.]
Hardware
The following table lists all the hardware components included in the package.
| Code | Description | Amount |
|---|---|---|
| PM | Cam Screws | 22 |
| TM | Cam Locks | 22 |
| PE18 | Screw 5x40 | 32 |
| PC5 | Screw 4x20 | 14 |
| PC3 | Screw 3.5x14 | 88 |
| C2 | Dowel 6x50mm | 2 |
| C1 | Dowel 6x30mm | 62 |
| PR1 | Nail 10x10 | 41 |
| PR2 | Nail 12x12 | 8 |
| SF | Mounting bracket | 2 |
| ANY | Clamp | 1 |
| PC10 | Screw 4.5x50 | 2 |
| PF4 | Screw 3.5x16 BC | 2 |
| BG | Adapter sleeve | 2 |
| SD | Shoe block | 8 |
| CM1A | Right Drawer slide | 7 |
| CM1B | Left drawer slide | 7 |
| CM1C | Metallic slide for left sided panel | 14 |
| CM1D | Metallic slide for right sided panel | 16 |
| TP1 | Tap hole 19mm | 14 |
| TP2 | Tap hole 13mm | 16 |
| S5 | Black triangular support | 14 |
| ET | Mirror | 1 |
| CG | Angle bracket | 8 |
| PX | Handle | 6 |
| G | Screw | 6 |
| CZ3 | Allen key | 1 |
Helpful Tips
Installing Cam
Identify the arrow on the head of the cam. The arrow MUST point toward the hole in the edge of the panel. Push the cam all the way down into the hole.
[Diagram showing a cam with an arrow on its head being inserted into a panel edge hole.]
Cam and Dowel Alignment
Ensure the arrow on the cam points toward the hole and insert the cam dowel into the hole. Make sure the pieces join together.
[Diagram showing a cam and dowel being aligned and inserted into two joining panels.]
Tightening Cam
Use a screwdriver to turn the cam. Turn the cam clockwise until fully tightened. Slightly more than half a turn.
[Diagram showing a screwdriver turning a cam clockwise in a panel.]
Assembly Steps
Step 1A: Drawer Preassembly (Repeat 3 times)
Take part 14 (Right side of the smallest right-hand drawer) and part 15 (Left side of the smallest right-hand drawer). Insert dowel C1 into the designated holes on both parts. Attach part 22 (Back Panel-Lower) to these sides.
[Diagram showing parts 14 and 15 being joined with dowels C1, and part 22 being attached.]
Step 1B: Drawer Preassembly (Repeat 4 times)
Take part 19 (Right Side of Drawer-Largest) and part 20 (Left Side of Drawer-Largest). Insert dowel C1 into the designated holes on both parts. Attach part 23 (Base of Drawer-Small) to these sides.
[Diagram showing parts 19 and 20 being joined with dowels C1, and part 23 being attached.]
Step 1C: Drawer Preassembly
Take part 16 (Back of Drawer-Large). Insert dowel C1 into the designated holes.
[Diagram showing part 16 with dowels C1 being inserted.]
Step 1D: Drawer Preassembly (Repeat 2 times)
Take part 17 (Back of Drawer-Small). Insert dowel C1 into the designated holes on both parts.
[Diagram showing two parts 17 with dowels C1 being inserted.]
Step 1E: Drawer Preassembly (Repeat 4 times)
Take part 21 (Back of Drawer-Largest). Insert dowel C1 into the designated holes on all four parts.
[Diagram showing four parts 21 with dowels C1 being inserted.]
Step 1F: Drawer Preassembly
Take part 12 (Larger Front of Drawer-Large). Use cam screws PM and insert them into the pre-drilled holes. Ensure correct orientation as shown in the diagram (avoiding incorrect screw insertion).
[Diagram showing part 12 with cam screws PM being inserted. Includes a 'Correct' icon (checkmark) and 'Incorrect' icons (crosses) for screw insertion.]
Step 1G: Drawer Preassembly (Repeat 2 times)
Take two parts 13 (Larger Front of Drawer-Small). Use cam screws PM and insert them into the pre-drilled holes.
[Diagram showing two parts 13 with cam screws PM being inserted.]
Step 1H: Drawer Preassembly (Repeat 4 times)
Take four parts 18 (Front of Drawer-Largest). Use cam screws PM and insert them into the pre-drilled holes.
[Diagram showing four parts 18 with cam screws PM being inserted.]
Step 2: Drawers Mounting (Repeat 2 times)
Take parts 17, 15, 14, and 23. Use screw PE18 and allen key CZ3 to attach part 14 to 17 and 15 to 23. Then attach part 23 to 15 and 14 to 17.
[Diagram showing the assembly of a drawer side panel (17) with a drawer front (14) using PE18 screws and CZ3 allen key. Another view shows a drawer side panel (15) attached to a drawer base (23).]
Step 2: Drawers Mounting (Repeat 4 times)
Take parts 21, 19, 20, and 23. Use screw PE18 and allen key CZ3 to attach part 19 to 21 and 20 to 23. Then attach part 23 to 20 and 19 to 21.
[Diagram showing the assembly of a drawer side panel (21) with a drawer front (19) using PE18 screws and CZ3 allen key. Another view shows a drawer side panel (20) attached to a drawer base (23).]
Step 3: Drawer Assembly (Repeat 2 times)
Take parts 12, 15, and 14. Use cam locks TM and tap hole TP1 to secure the parts. The diagram shows inserting the cam lock and turning it with a screwdriver to lock the cam screw.
[Diagram showing cam lock TM and tap hole TP1 being used to secure parts. Includes a visual of the locking mechanism.]
Step 3: Drawer Assembly (Repeat 4 times)
Take parts 18, 20, and 19. Use cam locks TM and tap hole TP1 to secure the parts.
[Diagram showing cam lock TM and tap hole TP1 being used to secure parts for drawer assembly.]
Step 4: Drawer Mounting (Repeat 2 times)
Take part 24 (Base of Drawer-Large) and part 12 (Larger Front of Drawer-Large). Use screw PC5 and support S5 to attach the base to the front.
[Diagram showing part 24 being attached to part 12 using screw PC5 and support S5.]
Step 4: Drawer Mounting (Repeat 4 times)
Take part 23 (Base of Drawer-Small) and parts 17 (Back of Drawer-Small). Use screw PC5 and support S5 to attach the base to the sides.
[Diagram showing part 23 being attached to parts 17 using screw PC5 and support S5.]
Step 5: Drawer Mounting
Attach drawer slides CM1A (Right Drawer slide) and CM1B (Left drawer slide) to the drawer sides using screw PC3. Ensure the wheels are towards the back of the drawers.
[Diagram showing drawer slides CM1A and CM1B being attached to drawer panels using PC3 screws. Includes a warning icon ⚠️ and text about wheel orientation.]
Step 6: Drawer Final Assembly
Attach handles PX to the drawer fronts using screws G. Then attach the assembled drawer to the main unit using the drawer slides.
[Diagram showing handles PX being attached to drawer fronts with screws G. Also shows an assembled drawer being inserted into the main unit.]
Step 7: Preassembly of Parts (Left Side Panel)
Take part 02 (Left Side Panel). Attach drawer slides CM4C and CM4D using dowels C1 and screws PC3. Ensure correct hole location for the screw.
[Diagram showing the top view of part 02 with drawer slides CM4C and CM4D being attached. Includes a detailed view of correct screw hole location and an illustrative view of the slide orientation.]
Step 8: Preassembly of Parts (Right Side Panel)
Take part 03 (Right Divider). Attach drawer slides CM4C and CM4D using dowels C1 and screws PC3. Ensure correct hole location for the screw.
[Diagram showing the top view of part 03 with drawer slides CM4C and CM4D being attached. Includes a detailed view of correct screw hole location and an illustrative view of the slide orientation.]
Step 9: Preassembly of Parts (Left Divider)
Take part 04 (Left Divider). Attach drawer slides CM4C and CM4D using dowels C1 and screws PC3. Ensure correct hole location for the screw.
[Diagram showing the top view of part 04 with drawer slides CM4C and CM4D being attached. Includes a detailed view of correct screw hole location and an illustrative view of the slide orientation.]
Step 10: Preassembly of Parts (Top Panel)
Take part 05 (Top). Attach it to the side panels using cam screws PM.
[Diagram showing part 05 being attached to other components using cam screws PM. Includes correct and incorrect screw insertion examples.]
Step 11: Preassembly of Parts (Back Panel)
Take part 08 (Back of Mirror). Attach angle brackets CG using screws PC3.
[Diagram showing part 08 with angle brackets CG being attached using PC3 screws.]
Step 14: Preassembly of Parts (Baseboards)
Take parts 09 (Baseboard). Insert dowels C1 into the designated holes on parts 09.
[Diagram showing parts 09 with dowels C1 being inserted.]
Step 16: Preassembly of Parts (Upper Side Panels)
Take parts 06 (Side Panel-Upper). Ensure wooden dowels C1 and C2 are installed on the same side. Example: C1 on top and C2 on bottom.
[Diagram showing parts 06 with dowels C1 and C2 being inserted, with emphasis on correct side placement.]
Step 17: Product Assembly (Mirror Frame)
Take parts 05, 06, and 07. Attach part 07 (Top) to parts 06 using screws PE18 and dowels C1. Ensure part 07 is installed on the side with short wooden dowels C1, as this is the top of the mirror.
[Diagram showing the assembly of the mirror frame using parts 05, 06, and 07, secured with PE18 screws and C1 dowels. A warning icon ⚠️ highlights the correct orientation.]
Step 18: Product Assembly (Main Structure)
This step requires two people. Install the top portion of the vanity (part 05) onto the assembled base structure. Use cam locks TM to secure the top. The diagram shows the cam lock mechanism being engaged.
[Diagram showing two people assembling the main structure. Part 05 is being attached to the base. Includes a visual of the cam lock mechanism being engaged.]
Step 19: Product Assembly (Back Panel Attachment)
Attach part 08 (Back of Mirror) to the main structure using screws PC3 and angle brackets CG.
[Diagram showing part 08 being attached to the main structure with PC3 screws and CG angle brackets.]
Step 20: Product Assembly (Back Panel Nailing)
Ensure the furniture is square. Nail the back parts (22) in place using nails PR1. Nail as straight as possible to the top and sides to prevent drawers from appearing crooked.
[Diagram showing the back panels (22) being nailed into place with PR1 nails. Includes visual cues for squaring the furniture and a warning about crooked drawers if not done correctly.]
Step 21: Drawer Installation
Insert the drawer slides into the corresponding profiles on the main unit and close the drawer to finish locking the clip. The diagram shows the correct method (checkmark) and incorrect method (cross) for drawer insertion.
[Diagram showing a drawer being inserted into its slot. Includes a close-up of the slide mechanism and a visual comparison of correct (checkmark) and incorrect (cross) insertion.]
| Part | Kg | lb |
|---|---|---|
| A | 35 | 77.16lb |
| B | 6 | 13.23lb |
Anti-tipping Installation
WARNING - Anti-Tip Advisory: Potential of serious fatal crushing injuries may occur from furniture tip-over. To help prevent tip-over:
Note: Do not turn the DRYWALL ANCHOR into a wall stud. If you prefer to fasten the SAFETY ANTI-TIPPING to a wall stud, go to your local hardware store for proper hardware.
Compress the wings of the anchor before inserting.
[Diagram showing the BG anchor with wings being compressed before insertion.]
Insert the chuck into the hole of the base material.
[Diagram showing the BG anchor being inserted into a hole in the furniture base material.]
Position the object over the bushing and secure it with a screw.
[Diagram showing the furniture positioned over the installed anchor bushing, ready to be secured with a screw.]
Important: Pierce the base material with a 0.39 in. drill. The minimum length of the screw must be the bushing length + object thickness that will be fixed. To guarantee the wing expansion function of the bushing, after the screw head is at the object to be fixed, one must continue to rotate the screw until maximum torque is reached.
Instructions:
- ALWAYS INSTALL the tip-over restraint that came with your furniture. This tip-over restraint only reduces but does NOT completely eliminate the risk of tip-over.
- ALWAYS Place the heaviest items in the lowest/bottom drawer.
- NEVER place heavy objects on top of this product.
- NEVER allow children to scale/climb/hang on the drawers, doors, or shelves.
- NEVER open more than one drawer at a time.
ATENCIÓN: Aviso antivuelco. Pueden producirse lesiones graves por aplastamiento mortales debido al vuelco de los muebles. Para ayudar a prevenir vuelcos:
- SIEMPRE INSTALE el sistema de retención que viene con sus muebles. Este sistema antivuelco solo reduce pero NO elimina por completo el riesgo de vuelco.
- SIEMPRE coloque los artículos más pesados en el cajón más bajo /inferior.
- NUNCA coloque objetos pesados encima de este producto.
- NUNCA permita que los niños escalen, trepen o se cuelguen de los cajones, puertas o estantes.
- NUNCA abra más de un cajón a la vez.
[Diagram showing the anti-tipping installation process with parts SF, ANY, PC10, PF4, and BG. Shows drilling, inserting anchors, and securing the furniture to the wall.]
Cleaning Instructions
To remove the printed number, apply a small amount of Glass Cleaner or Hand sanitizer and wipe with a paper towel.
[Diagram showing a hand wiping a surface with a paper towel after applying cleaner, with icons indicating glass cleaner and hand sanitizer.]
