ASSEMBLY INSTRUCTIONS
Warning: CHOKING HAZARD - Small Parts. Not for children under 3 years. Adult assembly required.
Note: Although not required, it is recommended that a drill be used to help ease the assembly process, as some holes are not pre-drilled.
Part Identification
Overall Dimensions: Height: 61.02 inches, Depth: 17.72 inches, Width: 47.24 inches.
The diagram displays the main components of the vanity desk, including the mirror, top surface, drawers, and storage niches, with numerical labels indicating their positions.
List of Pieces
| Code | Description | Amount | Length (in.) | Width (in.) | Thickness (in.) | Box |
|---|---|---|---|---|---|---|
| 01 | Right Side Panel | 1 | 29.13" | 17.60" | .59" | A |
| 02 | Left Side Panel | 1 | 29.13" | 17.60" | .59" | A |
| 03 | Right Divider | 1 | 29.13" | 17.60" | .59" | A |
| 04 | Left Divider | 1 | 29.13" | 17.60" | .59" | A |
| 05 | Top | 1 | 47.17" | 17.60" | .59" | B |
| 06 | Bottom/Base | 2 | 12.20" | 17.60" | .59" | A |
| 07 | Fixed bottom shelf | 1 | 12.20" | 16.85" | .59" | A |
| 08 | Support | 1 | 43'-0" | 7.56" | .59" | A |
| 09 | Baseboard | 1 | 43'-0" | 3.15" | .59" | A |
| 10 | Top-Upper-Large | 1 | 47.17" | 3.94" | .59" | B |
| 11 | Side Panel Support | 2 | 264'-3" | 3.94" | .59" | A |
| 12 | top shelf | 2 | 45.91" | 3.27" | .59" | B |
| 13 | Back of Mirror | 1 | 45.91" | 264'-3" | .59" | B |
| 14 | Larger Front of Drawer-Small | 1 | 11.89" | 3.94" | .59" | A |
| 15 | Right Side of Drawer | 1 | 14.17" | 2.99" | .59" | A |
| 16 | Left Side of Drawer | 1 | 14.17" | 2.99" | .59" | A |
| 17 | Back of Drawer-Small | 1 | 10.04" | 2.99" | .59" | A |
| 18 | Larger Front of Drawer-Medium | 2 | 11.89" | 52'-7" | .59" | A |
| 19 | Right Side of Drawer-Medium | 2 | 14.17" | 4.72" | .59" | A |
| 20 | Left Side of Drawer-Medium | 2 | 14.17" | 4.72" | .59" | A |
| 21 | Back of Drawer-Medium | 2 | 10.04" | 4.72" | .59" | A |
| 22 | Front of Drawer Largest | 1 | 11.89" | 11.18" | .59" | A |
| 23 | Right Side of Drawer-Largest | 1 | 14.17" | 7.09" | .59" | A |
| 24 | Left Side of Drawer-Largest | 1 | 14.17" | 7.09" | .59" | A |
| 25 | Back of Drawer-Largest | 1 | 10.04" | 7.09" | .59" | A |
| 26 | Base of Drawer | 4 | 10.55" | 14.09" | .12" | A |
| 27 | Back Panel Lower | 2 | 29.25" | 12.99" | .12" | A |
Hardware
| Code | Description | Amount |
|---|---|---|
| PM | Cam Screws | 16 |
| TM | Cam Locks | 16 |
| PE18 | Screw 5x40 | 38 |
| PC8 | Screw 4.0x40 | 8 |
| PC5 | Screw 4x20 | 8 |
| PC3 | Screw 3.5x14 | 32 |
| PF2 | Screw 3.5x14 | 8 |
| C2 | Dowel 6x50mm | 2 |
| C1 | Dowel 6x29mm | 62 |
| PR1 | Nail 10x10 | 43 |
| PR2 | Nail 12x12 | 8 |
| SF | Mounting bracket | 2 |
| ANY | Clamp | 1 |
| PC10 | Screw 4.5x50 | 2 |
| PF4 | Screw 3.5x16 BC | 2 |
| BG | Adapter sleeve | 2 |
| CM1A | Right Drawer slide | 4 |
| CM1B | Left drawer slide | 4 |
| CM1C | Metallic slide for left sided panel | 4 |
| CM1D | Metallic slide for right sided panel | 4 |
| SD | Shoe black | 8 |
| TP2 | Top hole 13mm | 46 |
| TP1 | Top hole 19mm | 18 |
| PX | Handle 70mm | 4 |
| ET | Mirror 1050x504x3 mm | 1 |
| CZ3 | Allen key | 1 |
| S5 | Black triangular support | 8 |
Assembly Steps
Step 1A: Drawer Preassembly
This process is repeated twice.
Description: Attach part 15 (Right Side of Drawer) to part 14 (Larger Front of Drawer-Small) using two dowels (C1).
Diagram shows part 15 and 14 being joined with dowels.
Step 1B: Drawer Preassembly
This process is repeated twice.
Description: Attach part 19 (Right Side of Drawer-Medium) to part 18 (Larger Front of Drawer-Medium) using two dowels (C1). Repeat for the left side (part 20 to part 18).
Diagram shows parts 19 and 20 being attached to part 18 with dowels.
Step 1C: Drawer Preassembly
Description: Attach part 23 (Right Side of Drawer-Largest) to part 22 (Front of Drawer Largest) using two dowels (C1). Repeat for the left side (part 24 to part 22).
Diagram shows parts 23 and 24 being attached to part 22 with dowels.
Step 1E: Drawer Preassembly
Description: Attach part 17 (Back of Drawer-Small) to part 14 (Larger Front of Drawer-Small) using two dowels (C1).
Diagram shows part 17 being attached to part 14 with dowels.
Step 1F: Drawer Preassembly
This process is repeated twice.
Description: Attach part 21 (Back of Drawer-Medium) to part 19 (Right Side of Drawer-Medium) using two dowels (C1). Repeat for the left side (part 21 to part 20).
Diagram shows parts 21 being attached to parts 19 and 20 with dowels.
Step 1G: Drawer Preassembly
Description: Attach part 25 (Back of Drawer-Largest) to part 23 (Right Side of Drawer-Largest) using two dowels (C1).
Diagram shows part 25 being attached to part 23 with dowels.
Step 1I: Drawer Preassembly
Description: Attach part 11 (Side Panel Support) to part 13 (Back of Mirror) using two screws (PC8).
Diagram shows part 11 being attached to part 13 with screws.
Step 1J: Drawer Preassembly
Description: Attach part 18 (Larger Front of Drawer-Medium) to part 26 (Base of Drawer) using two cam screws (PM) and two cam locks (TM).
Diagram shows part 18 being attached to part 26 using cam hardware.
Step 1K: Drawer Preassembly
Description: Attach part 22 (Front of Drawer Largest) to part 26 (Base of Drawer) using two screws (PC5).
Diagram shows part 22 being attached to part 26 with screws. Includes a visual guide for correct screw insertion.
Step 2: Drawers Mounting
Description: Assemble the drawer boxes. Attach drawer sides (19, 20) to drawer backs (21) using screws (PE18). Attach drawer fronts (14, 18, 22) to drawer sides (15, 16, 23, 24) and bases (26) using various hardware (PE18, CZ3, TP2, CM1A, CM1B, CM1C, CM1D).
Diagrams show the assembly of four different drawer sizes, illustrating the connection of sides, fronts, and backs using specified hardware.
Step 3: Drawers Mounting
Description: Continue drawer assembly. Attach drawer fronts (19, 20) to drawer sides (15, 16) using cam screws (TM) and cam locks (TM). Attach drawer front (14) to drawer sides (15, 16) using screws (PC3). Attach drawer front (22) to drawer sides (23, 24) using screws (PC3).
Diagrams show the attachment of drawer fronts to the sides and bases using cam locks and screws.
Step 4: Drawers Mounting
Description: Secure the drawer bases (26) to the drawer sides (19, 20, 23, 24) using screws (PC5) and triangular supports (S5).
Diagrams show the drawer bases being attached to the sides with screws and supports.
Step 5: Drawers Mounting
Description: Install drawer slides (CM1A, CM1B, CM1C, CM1D) onto the assembled drawer boxes using screws (PC3). Ensure wheels are towards the back of the drawers.
Diagrams show the attachment of drawer slides to the sides of the drawer boxes. Includes a note about ensuring screws are fully tightened.
Step 6: Drawer Final Assembly
Description: Attach handles (PX) to the drawer fronts (14, 18, 22) using screws (PF2). Use the indentations on the drawer fronts as a guide for placement.
Diagrams show handles being attached to drawer fronts using screws.
Step 7: Preassembly of parts
Description: Insert dowels (C1) into parts 01, 02, 03, and 04.
Diagrams show dowels being inserted into the edges of panels 01, 02, 03, and 04.
Step 8: Preassembly of parts
Description: Insert dowels (C1) into part 08 (Support) and part 13 (Back of Mirror). Insert dowels (C2) into part 08.
Diagrams show dowels being inserted into panels 08 and 13.
Step 9: Preassembly of parts
Description: Attach part 05 (Top) to the assembled structure using cam screws (PM) and cam locks (TM).
Diagram shows the top panel being attached using cam hardware. Includes a visual guide for correct screw insertion.
Step 10: Assembly
Description: Attach drawer slides (CM1C, CM1D) to panels 03 (Right Divider) and 01 (Right Side Panel) using screws (PC3). Attach drawer slides (CM1C, CM1D) to panels 04 (Left Divider) and 02 (Left Side Panel) using screws (PC3).
Diagrams show the attachment of drawer slides to the side panels and dividers. Includes a detailed view of correct hole location for the PC3 screw.
Step 11: Assembly
Description: Attach part 13 (Back of Mirror) to part 12 (top shelf) using screws (PC8). Attach part 11 (Side Panel Support) to part 13 using screws (PC8).
Diagram shows part 13 being attached to shelves 12 and supports 11 using screws.
Step 12: Assembly
Description: Assemble the main frame. Connect panels 10, 11, 12, and 13 using dowels (C1, C2) and screws (PC8).
Diagrams show the connection of various panels to form the upper structure, using dowels and screws.
Step 13: Assembly
Description: Attach part 05 (Top) to the side panels (01, 02) and dividers (03, 04) using screws (PC8). Attach part 11 (Side Panel Support) to the top panel (05) using screws (PE18).
Diagrams show the top panel and side supports being attached to the main structure.
Step 14: Product Assembly
Description: Assemble the base structure. Attach panels 03 (Right Divider) and 04 (Left Divider) to panel 08 (Support) and panel 09 (Baseboard) using screws (PE18).
Diagram shows the base structure being assembled using screws.
Step 15: Product Assembly
Description: Connect panels 01, 02, 03, 04, 06, and 07 using dowels (C1) and screws (PE18).
Diagram shows the main panels of the desk being connected to form the cabinet structure.
Step 16: Assembly
Description: Attach the base panels (06) to the side panels (01, 02) and dividers (03, 04) using screws (PR2) and shoe black (SD).
Diagram shows the base panels being attached to the main structure.
Step 17: Assembly
Description: Attach the top panel (10) and mirror support (11) to the main structure using cam locks (TM) and cam screws (TM).
Diagrams show the mirror assembly being attached to the top surface.
Step 18: Assembly
Description: Nail the back panels (27) to the back of the assembled unit using nails (PR1). Ensure the back panels are aligned straight with the top and sides to prevent drawers from appearing crooked.
Diagram shows nails being hammered into the back panels. Includes a note about ensuring the furniture is square for proper drawer and door alignment.
Step 19: Drawer Installation
Description: Insert the drawer slides into the corresponding profiles on the cabinet and close the drawer to lock the clip.
Diagram shows the process of inserting a drawer into the cabinet slides. Includes a visual check for correct alignment.
Weight Capacity: A: 35 kg (77.16 lb), B: 6 kg (13.23 lb).
Step 20: Anti-tipping Installation
Note: Do not turn the DRYWALL ANCHOR into a wall stud. If you prefer to fasten the SAFETY ANTI-TIPPING to a wall stud, go to your local hardware store for proper hardware.
Description: Compress the wings of the anchor (BG) before inserting it into the base material. Pierce the base material with a 0.39 in. drill. Insert the chuck into the hole of the base material. Position the object over the bushing and secure it with a screw (PF4). Ensure the screw length is adequate for the bushing and object thickness. Rotate the screw until maximum torque is reached to guarantee the wing expansion function.
Diagrams illustrate the process of attaching the anti-tip hardware to the furniture and the wall using anchors, screws, and clamps.
A WARNING - Anti-Tip Advisory: Potential for serious fatal crushing injuries may occur from furniture tip-over. To help prevent tip-over: ALWAYS INSTALL the tip-over restrain that came with your furniture. This tip-over restrains only reduces but does NOT completely eliminate the risk of tip-over. ALWAYS Place the heaviest items in the lowest/bottom drawer. NEVER place heavy objects on top of this product. NEVER allow children to scale/climb/hang on the drawers, doors, or shelves. NEVER open more than one drawer at a time.
Step 21: Cleaning Instructions
To Remove the printed number, apply a small amount of Glass Cleaner or Hand sanitizer and wipe with a paper towel.
