SONOFF TH10 Wi-Fi Smart Switch
Monitor temperature and humidity with your smart home devices.
Getting Started
Welcome to use the SONOFF TH10! This device can monitor real-time temperature and humidity through the eWeLink app. It supports setting a temperature or humidity range to automatically turn connected devices on or off.
1. Download "eWeLink" app
Search for "eWeLink" in the [App Store] for iOS versions or Google Play for Android versions.
[Visual: iOS and Android phone screens showing the eWeLink app icon and login/registration interface.]
2. Wiring Instruction
[Visual: Wiring diagram showing AC input (L, N) and AC output (L, N) connections for the SONOFF TH10, with a port for the AM2301/DS1802 sensor.]
Connect the AC power input (L, N) and AC output (L, N) terminals. Ensure the sensor (e.g., AM2301/DS1802) is plugged into the designated port.
3. Add Device
Step 1: Plug your sensor in and power up your device.
[Visual: Close-up of the SONOFF TH10 circuit board with a finger pressing a button.]
Step 2: Press and hold the [button] for 7 seconds until the [green LED] blinks 3 times and then blinks repeatedly.
Step 3: For Android, directly tap the "Add" icon on eWeLink to search for the device and click next. For iOS, go to your phone's Settings > WiFi, connect to the WiFi network beginning with "ITEAD-******" using the default password "12345678". Return to eWeLink, select the pairing method, and click next. The app will auto-search for the device.
Step 4: Input your home SSID & password. Your SSID must consist of letters or numbers. If there is no password, leave it blank. Note: eWeLink currently only supports the 2.4G Wi-Fi communication protocol; 5G-Wi-Fi routers are not supported.
[Visual: Progress indicator showing "searching device..." with a progress bar.]
Step 5: The device will be registered by eWeLink and added to your account. This process takes 1-3 minutes.
Step 6: Name the device to complete the setup.
Step 7: The device may appear "Offline" on eWeLink initially, as it needs about 1 minute to connect to your router and the server. When the [green LED] is solid on, the device is "Online". If eWeLink still shows "Offline", close and reopen the eWeLink app.
APP Features
1. Wi-Fi Remote Control and Device State
Monitor device status and check real-time temperature and humidity values. You can turn devices on/off by tapping the device icon. In Auto mode, you can set a specified temperature or humidity range to control connected devices. In Manual mode, you can tap the device icon to turn it on/off.
2. Share Device
Owners can share devices with other accounts, provided the shared devices remain online. ?
3. Timing Schedules
Support for up to 8 single/repeat timing schedules per device. Preset timers can function even when Wi-Fi is unavailable, as long as the device remains powered on. ⏰
4. Security Mechanism
Each device has a single owner. Other users cannot add devices that have already been added.
5. Auto Mode and Manual Mode
In Auto mode, the switch cannot be manually turned ON/OFF using the button. In Manual mode, the switch can be turned ON/OFF at any time. Preset timers function normally in Auto mode.
6. Sensor Integration
With Sensor Inserted: The app will display temperature and humidity values, and Auto mode can be configured.
Without Sensor: The app will not display temperature and humidity values, and Auto mode is unavailable.
Update
The device will auto-remind you of new firmware or version updates. Please update as soon as possible.
Problems and Solutions
Read the detailed FAQ on the Itead Smart Home Forum for more information.
1. My device has added successfully, but stays "Offline".
Answer: Newly added devices require 1-2 minutes to connect to your router and the internet. If it remains offline for an extended period, check the [green LED] status:
- 1.1. [Green LED] quickly blinks once and repeats: Device failed to connect to the router. This could be due to an incorrect Wi-Fi password, the device being too far from the router (weak Wi-Fi signal), or attempting to connect to a 5G-Wi-Fi router (only 2.4G Wi-Fi is supported). Ensure your router is MAC-open.
- 1.2. [Green LED] slowly blinks once and repeats: Device connected to the router and server but failed to be added to the device list. Power cycle the device and try adding it again.
- 1.3. [Green LED] quickly blinks twice and repeats: Device connected to the router but failed to connect to the server. Confirm your Wi-Fi router is functioning correctly.
2. Why can't the APP find the device in pairing status?
Answer: This is likely due to your phone's cache. Close your phone's Wi-Fi (WLAN), wait a minute, then reopen it. Simultaneously, power off the device if possible, then power it up again and try pairing.
3. My Wi-Fi is expired, can I connect the devices to LAN? Can my phone be directly connected to the device hotspot?
Answer: Currently, eWeLink does not support LAN or direct connection to the device's hotspot. All devices must be connected to a router to communicate with the internet cloud server.
4. The green LED keeps off, even if the device is powered on. The button does not work.
Answer: The circuit may be broken. Please send the device back for testing. Return shipping postage and packaging will be at the buyer's expense. If the device is damaged by the buyer, they will bear the extra repair cost.
