SECOP FRK11G Compressor Technical Data

Model: FRK11G

Compressor Design

Attribute	Value
Oil type	Polyolester
Oil viscosity	19,2 cSt
Oil quantity	240 cm³ / 8,1 fl.oz
Refrigerant charge - tech. limit	700g / 24,7oz
Free gas volume comp.	1495 cm³ / 50,6 fl.oz
Weight	9,7kg / 21,4lbs
Motor protection	external
Winding resistance main	8,40 Ω (at 25°C)
Winding resistance aux	11,90 Ω (at 25°C)
Max. winding temp.	125°C / 257°F
Max. discharge temp.	130°C / 266°F
Additional note	Very good robustness against liquid intake. Ice-cube maker optimization - indirect suction intake. Special design for high refrigerant charge.

General Configurations with FRK11G

Configuration	Conf. 1	Conf. 2
Motor configuration	CSIR	CSIR
Power supply (nominal)	220-240V/50Hz	208-230V/60Hz
Number of phases	1	1
Voltage range	187-254V	198-253V
Approvals	VDE, CB, UL in progress	VDE, CB, UL in progress
Starting torque	HST	HST
Note	Electrical equipment is included and pre-assembled to compressor.

Applications with FRK11G

Attribute	Conf. 1	Conf. 2
Refrigerant	R134a	R134a
Application	LBP+MBP+HBP	LBP+MBP
System cooling	fan 3m/s	fan 3m/s
Hot gas defrost	OK	OK
Long interval pull down	OK	OK

Electrical Data - Configurations with FRK11G

Attribute	Conf. 1	Conf. 2
Starting device type	relay	relay
Run capacitor	-/-	-/-
Start capacitor	80μF	80μF
LRA (locked rotor amps / 4s/ U(N))	13,5A	13,5A
RLA (rated load amps / 1s/ U(N))	2,1A	2,1A
Cut in current (U(N))	12,3A	12,3A

Compressor Dimensions

Dimension	Value (mm / in)	Diagram Reference
A Height	182mm / 7,17in	A
B Height	175mm / 6,89in	B
C Length shell	198mm / 7,8in	C
D Length w. cover	238mm / 9,37in	D
E Width	160mm / 6,3in	E

Connectors:

Type	Diameter (mm / in)	Material	Horizontal angle	Vertical angle	Position I/h/w (mm / in)	Straight tube I. (in)
Suction (X)	øi 8,11-8,29 / øi 0,32-0,33	copper	+2°	+2°	119/73/59 / 4,7/2,9/2,3	14 / 0,5
Discharge (Y)	øi 6,11-6,29 / øi 0,24-0,25	copper	35°	30°	117/107/66 / 4,6/4,2/2,6	14 / 0,5
Process (Z)	øi 6,11-6,29 / øi 0,24-0,25	copper	13°	40°	-88/101/71 / -3,5/4/2,8	14 / 0,5

Compressor Fixation

Baseplate Dimensions:

Type	Dimension (mm / inch)
Baseplate	204 / 8.03
Bw	132 / 5.2
ØL	101.6 / Ø 4
ØS	19 / Ø 0.75
ØE	16 / Ø 0.63
Large holes	165 / 6.5
Small holes	4 / -

Mounting Accessories:

Accessory	One Comp.	Multi Pack
Bolt joint \| M6 \| Ø16mm	118-1917	118-1918
Bolt joint \| Ø1/4" \| Ø16mm	118-1946	-
Bolt joint \| Ø1/4" \| Ø19mm	118-1949	-
Snap-on \| ø7,3 \| ø16mm	118-1947	118-1919

Application notes: Provision for PE Grounding is located at the PE Stamp on the compressor. Suctiongas connector and Process connector can be switched (minor loss of cooling capacity).

Operation Pressure Range

Condensing pressure (saturation temperature) vs. Evaporation pressure (saturation temperature)

A graph shows the relationship between condensing pressure and evaporation pressure for continuous and transitory operation. The X-axis represents evaporation pressure in [bar] and [°C/°F], while the Y-axis represents condensing pressure in [bar] and [°C/°F].

Performance Tables

Tables detail performance data including cooling capacity, COP, EER, power consumption (P1), current consumption (A), and ref. mass flow (m) under various conditions for R134a refrigerant at 220V/50Hz and 230V/60Hz.

Configuration 1: R134a, 220V/50Hz, CSIR, fan 3m/s, VDE, CB, UL in progress

Conditions	Cooling Capacity [W]	[Btu/h]	[kcal/h]	COP [W/W]	EER [Btu/Wh]	[kcal/Wh]	P1 [W]	Current [A]	Ref. mass flow [kg/h]
Evaporating temp. (°C/°F)
-35/-31	117,5	401	101,1	0,87	2,97	0,75	135,3	1,26	2,54
-25/-13	207,3	708	178,4	1,21	4,14	1,04	171,2	1,36	4,49
-15/5	352,0	1202	303,0	1,62	5,55	1,40	216,8	1,52	7,67
-10/14	447,0	1527	384,7	1,85	6,32	1,59	241,4	1,62	9,78
0/32	686,7	2345	591,0	2,37	8,08	2,04	290,3	1,82	15,19
5/41	833,0	2845	716,9	2,66	9,09	2,29	313,1	1,92	18,54
10/50	998,1	3409	858,9	2,99	10,21	2,57	333,8	2,01	22,40
Condensing temp. (°C/°F)
pc= 45/113	-35/-31	95,3	326	82,0	0,73	2,51	0,63	129,8	1,25	2,27
pc= 55/131	-25/-13	176,0	601	151,4	1,02	3,48	0,88	172,8	1,37	4,21
Return gas temp. RGT=32/90	-15/5	302,4	1033	260,2	1,33	4,54	1,14	227,3	1,56	7,28
	-10/14	459,1	1568	395,1	1,50	5,10	1,29	257,0	1,68	9,31
Liquid temp. Tliq= 45/113	0/32	592,6	2024	510,0	1,87	6,38	1,61	317,4	1,94	14,49
	5/41	719,5	2457	619,2	2,08	7,09	1,79	346,6	2,07	17,73
	10/50	863,0	2947	742,7	2,31	7,88	1,99	374,1	2,19	21,45

Configuration 2: R134a, 230V/60Hz, CSIR, fan 3m/s, VDE, CB, UL in progress

Conditions	Cooling Capacity [W]	[Btu/h]	[kcal/h]	COP [W/W]	EER [Btu/Wh]	[kcal/Wh]	P1 [W]	Current [A]	Ref. mass flow [kg/h]
Evaporating temp. (°C/°F)
-35/-31	141,0	482	121,3	1,05	3,58	0,90	134,6	1,16	3,04
-25/-13	248,1	847	213,5	1,27	4,33	1,09	195,7	1,33	5,37
-15/5	420,2	1435	361,7	1,65	5,62	1,42	255,2	1,52	9,16
-10/14	533,3	1821	459,0	1,87	6,40	1,61	284,7	1,62	11,67
0/32	665,8	2274	573,0	2,12	7,23	1,82	314,4	1,73	14,64
5/41	818,7	2796	704,6	2,38	8,12	2,05	344,4	1,85	18,11
7,2/45	1077,0	3678	926,9	2,77	9,47	2,39	388,5	2,03	24,06
Condensing temp. (°C/°F)
pc= 45/113	-35/-31	112,6	385	96,9	0,83	2,82	0,71	136,2	1,16	2,68
pc= 55/131	-25/-13	210,0	717	180,7	1,04	3,55	0,90	201,9	1,35	5,02
Return gas temp. RGT=32/90	-15/5	360,9	1233	310,6	1,33	4,55	1,15	271,1	1,58	8,69
	-10/14	459,1	1568	395,1	1,49	5,10	1,29	307,4	1,71	11,10
Liquid temp. Tliq= 45/113	0/32	573,7	1959	493,8	1,66	5,68	1,43	345,1	1,85	13,95
	7,2/45	706,0	2411	607,6	1,84	6,27	1,58	384,4	2,01	17,27
	7,2/45	929,4	3174	799,9	2,09	7,15	1,80	444,2	2,26	22,99

Electrical Accessories / Wiring Diagram

Diagrams illustrating electrical accessories and wiring for the compressor configurations are provided.

Components (incl. and pre. assembl.):

a5 current relay (T0377/L6-S1): 117U7071
start capacitor (80µF, 6.3mm): 117U5001
b, d cover + clamp + screws (5VA-compl.): 103N0600

Alternative components:

b, d 100x cover + clamp + screws (5VA): 103N2060
b, d cover + clamp + screws (5VA) in bag: 103N1060

Ambient/Machine Room Temperatures

Ambient temperature range: 10 - 43°C / 50 - 110°F
Machine room temperature range: 10 - 48°C / 50 - 119°F
Compressor cooling: fan 3m/s

	SECOP FRK6G Compressor Technical Data Sheet Detailed technical specifications, dimensions, electrical data, and performance tables for the SECOP FRK6G compressor, designed for R134a refrigerant and operating on 220-240V/50Hz and 208-230V/60Hz power supplies.
	SECOP FRK7.5G Compressor Technical Data Detailed technical specifications, dimensions, electrical data, and performance tables for the SECOP FRK7.5G compressor, designed for various refrigeration applications using R134a refrigerant.
	Secop FRK10G Compressor Technical Data and Specifications Detailed technical specifications, electrical data, performance tables, and application notes for the Secop FRK10G compressor, designed for 220-240V 50Hz and 208-230V 60Hz operation.
	SECOP KLE4.8GFTX Compressor Technical Data Sheet Detailed technical specifications and performance data for the SECOP KLE4.8GFTX compressor, including electrical data, dimensions, operating ranges, and performance tables for R134a refrigerant.
	Secop FRK7.5G Compressor Technical Data and Specifications Detailed technical specifications, performance data, and application notes for the Secop FRK7.5G compressor, covering 220-240V 50Hz and 208-230V 60Hz configurations.
	SECOP FRK5G Compressor Technical Data Sheet Detailed technical specifications, performance data, and application information for the SECOP FRK5G compressor, including electrical data, pressure ranges, and dimensions.
	Secop SC12G Compressor Technical Data and Specifications Detailed technical specifications, performance data, and wiring diagrams for the Secop SC12G compressor, including various configurations for 220-240V 50/60Hz operation. Covers electrical data, operating limits, and compressor dimensions.
	Secop FRK8.5G Compressor Technical Data and Specifications Detailed technical specifications, performance data, dimensions, and electrical information for the Secop FRK8.5G compressor, available in 220-240V 50Hz and 208-230V 60Hz configurations.