SONOFF TX Ultimate Smart Wall Switch User Manual V1.0

Product Presentation

Diagram of the SONOFF TX Ultimate smart wall switch. It shows the switch panel, touch zone, ambient light, switch indicator, network indicator, and wiring ports. A note indicates the device weighs less than 1 kg and is recommended for installation below 2 meters.

LED Indicator Status and Instructions

Operation Instructions

Diagram illustrating operation gestures: Quick Tap (finger tapping the panel), Long Press (finger pressing and holding the panel), Swipe (finger swiping up/down), Multi-finger Tap (multiple fingers tapping the panel).

Features

The SONOFF TX Ultimate is a smart wall switch with LED lights that produces sound, light, and vibration effects when turned on or off. After adding to the eWeLink app, you can remotely control power on/off, change ambient lighting modes, set timers, and smart scenes on your phone.

• [remote control] Remote Control
• [microphone] Voice Control
• [link] Smart Scene
• [LED] Ambient Light Mode
• [vibration] Touch Vibration
• [light] Light Effects

Installation

1. De-energize

Diagram showing a hand turning off a circuit breaker labeled 'ON/OFF' for multiple circuits, before interacting with the wall switch wiring.

Installation and maintenance of the device should be performed by a professional electrician. To avoid the risk of electric shock, do not use any connection or touch the terminal connector while the device is energized.

Wiring Instructions

Before installing the device, install an air switch as a protective device (air switch 16 A/250 V).

Wiring diagram for 1C model: Shows connection of L, N, and L1 to the device terminals, with one light bulb connected to L1.

Wiring diagram for 2C model: Shows connection of L, N, L1, and L2 to the device terminals, with two light bulbs connected to L1 and L2.

Wiring diagram for 3C model: Shows connection of L, N, L1, L2, and L3 to the device terminals, with three light bulbs connected to L1, L2, and L3.

Wiring diagram for 4C model: Shows connection of L, N, L1, L2, L3, and L4 to the device terminals, with four light bulbs connected to L1, L2, L3, and L4.

Ensure all cables are connected correctly.

Pairing Method

1. Pairing in the eWeLink App

1-1 Download the eWeLink App

Download the "eWeLink" app from Google Play Store or Apple App Store.

App store icons and a search bar showing 'eWeLink'.

1-2 Energize

After powering on, the device will enter Bluetooth pairing mode by default during the first use, and the LED frame light will illuminate in "Cycle Mode".

Illustration of the SONOFF TX Ultimate switch with a glowing blue LED frame, indicating 'Cycle Mode'.

The device will exit Bluetooth pairing mode if pairing is not successful within 10 minutes. To re-enter pairing mode, tap the wall switch panel for 5 seconds until the LED frame light illuminates in "cycle mode".

1-3 Add Device

Tap "+" and select "Bluetooth Pairing", then follow the instructions in the app.

Smartphone screen showing a '+' button to add a device, followed by a screen showing 'Add Device' options including 'Quick Pairing', 'Scan QR code', 'Sound Pairing', and 'Bluetooth Pairing' with an indication of 'Available for bluetooth connection'.

2. Amazon Frustration-Free Setup (FFS)

Applicable situation: The account used to purchase this device on Amazon.com is the same as the Alexa account you are logged into on the smart speaker (with the Certified for Humans badge).

2-1

After powering on the device, it will enter FFS pairing mode by default (the LED indicator flashes in "Cycle Mode").

Illustration of the SONOFF TX Ultimate switch with a glowing blue LED frame, indicating 'Cycle Mode'.

2-2

When you hear "New switch found" after powering on for approximately 1 to 2 minutes, refresh the device list in the Alexa app, and you will see the device has been added successfully.

For FFS setup guidance, visit: sonoff.tech/product-review/tutorial/works-with-alexa-instruction-guide/

1. The device will exit FFS pairing mode if not added within 30 minutes. To re-enter pairing mode, tap the switch panel for 5 seconds until the LED indicator flashes in "cycle mode".
2. If the device does not pair via FFS pairing mode for a prolonged period, pair it using method (1) Pairing in the eWeLink app.
3. FFS pairing mode can only be used to add devices to the Alexa app.
4. To synchronize this device between the eWeLink app and the Alexa app, connect your eWeLink and Alexa accounts via account linking, scan the QR code, or enter the URL to consult the account linking guidelines.

Add eWeLink-Remote Sub-devices

Go to the device's Settings page in the eWeLink app, select "eWeLink-Remote Sub-devices", and tap "Add", then activate the sub-device to add it successfully.

Sequence of smartphone screens showing navigation within the eWeLink app: Device Settings -> eWeLink-Remote sub-devices -> Add button -> successful addition.

Specifications

Warnings

Product Substance Information

Model approval code is displayed on the nameplate. Execution Standard: GB/T 16915.2-2012

This table is compiled according to the provisions of SJ/T 11364: o: Indicates that the content of this hazardous substance in all homogeneous materials of this component is below the limit requirement specified in GB/T 26572; x: Indicates that the content of this hazardous substance in at least one homogeneous material of this component exceeds the limit requirement specified in GB/T 26572.

SAR Warning

Under normal use conditions, this equipment should be kept a separation distance of at least 20 cm between the antenna and the user's body. In normal operating conditions, this equipment must be maintained at a distance of at least 20 cm between the antenna and the user's body.

Regulatory Information

WEEE Warning

WEEE Disposal and Recycling Information: All products bearing this symbol are waste electrical and electronic equipment (WEEE as per directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as terms and conditions of such collection points.

EU Declaration of Conformity

Shenzhen Sonoff Technologies Co., Ltd. declares that the radio equipment type T5-1C-86, T5-2C-86, T5-3C-86 are in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: sonoff.tech/usermanuals

For CE Frequency:

Operation frequency Range: 2402-2480MHz(BLE), 802.11 b/g/n20: 2412-2472MHz, 802.11 n40: 2422-2462MHz

RF Output Power:

2dBm(BLE), 15dBm(802.11b), 14dBm(802.11g), 15dBm(802.11n20), 16dBm(802.11n40)(Wi-Fi)

Company Information & Recycling

Shenzhen Sonoff Technologies Co., Ltd.
3F & 6F, Bldg A, No. 663, Bulong Rd, Shenzhen, Guangdong, China
ZIP code: 518000
MADE IN CHINA
Website: sonoff.tech

Certifications: CE, RoHS

Recycling Information: This device is recyclable. To be deposited in store or in a waste bin. Collection points at www.quefairedemesdechets.fr. Prioritize repair or donation of your device!