Salto
INSPIRED ACCESS
Installation Guide IQ2.0
Model Information: ELECTRONIC INFO. IQ212 - IQ222 - IQ213 IQ223 - IQ214 - IQ224
Copyright © 2025 Salto Systems, S.L.
Product Overview and Dimensions
The IQ2.0 device has a square form factor with rounded corners. Dimensions are 146mm (approximately 5-3/4 inches) in width and height, with a depth of 30mm (approximately 1-3/16 inches).
Included in the package are mounting hardware: two screws and two wall plugs.
Reference is made to BILT intelligent instructions for further guidance.
Installation Steps
The following steps illustrate the installation process for different IQ2.0 models. Multilingual instructions for connecting components are provided: "Plug", "Conectar", "Verbinden", "Branchez", "Conectar".
2.1 Ethernet + Cellular Model
Step 2-a: Connect the cellular module to the device. The action is described as "Plug" in multiple languages.
Step 3-a: Route the cables, ensuring they are managed neatly, and connect them to the device. The action is described as "Plug" in multiple languages.
Step 4-a: Mount the device to the wall. This involves connecting a power adapter and then attaching the device. The action is described as "Plug" in multiple languages.
2.2 Ethernet + Wi-Fi Model
Step 2-b: Connect the Wi-Fi module to the device. The action is described as "Plug" in multiple languages.
Step 3-b: Route the cables, ensuring they are managed neatly, and connect them to the device. The action is described as "Plug" in multiple languages.
Step 4-b: Mount the device to the wall. This involves connecting a power adapter and then attaching the device. The action is described as "Plug" in multiple languages.
2.3 Ethernet + PoE Model
Step 2-c: Connect the PoE cable to the device. The action is described as "Plug" in multiple languages.
Step 3-c: Route the cables, ensuring they are managed neatly, and connect them to the device. The action is described as "Plug" in multiple languages.
2.4 Ethernet Model
Step 2-d: Connect the Ethernet cable to the device. The action is described as "Plug" in multiple languages.
Step 3-d: Route the cables, ensuring they are managed neatly, and connect them to the device. The action is described as "Plug" in multiple languages.
Step 4-d: Mount the device to the wall. This involves connecting a power adapter and then attaching the device. The action is described as "Plug" in multiple languages.
Support and Mounting
The document details support bracket SP225764, which requires TORX 20 screws for installation.
For installations on metal surfaces:
- Correct mounting involves attaching the support to a beam (indicated by ✔️).
- Incorrect mounting involves attaching the support directly to a ceiling grid (indicated by ❌).
A recommended mounting height of 101mm is indicated.
Technical Specifications
| Operation Conditions | ||
|---|---|---|
| Parameter | Value | Unit |
| Temperature | 0 to 40 | °C |
| 2.4 GHz RF Characteristics | ||
|---|---|---|
| Parameter | Value | Unit |
| Frequency Range | 2405-2480 MHz (ISM band) | |
| RF Standard | IEEE 802.15.4 | |
| Indoor Radio Range | 7* | m |
| *Depending upon installed environment. | ||
| Power Supply Characteristics | ||
|---|---|---|
| Parameter | Value | Unit |
| (To be fed only by an official SALTO Power Supply adapter) | ||
| Input Voltage | 12 | V |
| Max Current | 800 | mA |
| Other Characteristics | |
|---|---|
| Wi-Fi | IEEE 802.11 b/g/n radio |
| BLUEnet | Bluetooth 4.2 Compliant, Integrated antenna, TX power: up to +8dBm, RX sensitivity: down to -92dBm, Indoor range: 10m-15m* *Depending upon installed environment. (PoE + Wi-Fi variant might suffer range reduction of up to 30%). |
| PoE | The PoE connection complies to IEEE 802.3af (max 15.40W, also known as 802.3a Type 1) |
BLUEnet Information and LED Indicators
The environment significantly impacts BLUEnet range radiation (e.g., metal, concrete walls). The receiver device must be positioned facing the product's antenna. Recommended connectivity distance is 10m to 15m.
The device features an LED indicator for status.
| LED Mode | LED Colour | Status Indication |
|---|---|---|
| Blink BLUE twice | BLUE | Normal Power Up |
| Blink long BLUE | BLUE | Software reset |
| Blink RED GREEN BLUE | RED, GREEN, BLUE | Factory reset |
| Blink short BLUE | BLUE | IQ2.0 firmware update |
| Blink short GREEN (2 minutes) | GREEN | Until BLE connection is established |
| Blink long GREEN | GREEN | BLE connection is established |
| Blink short RED | RED | No connection to the cloud |
| Blink long PURPLE | PURPLE | Not valid subscription found / Factory Mode |
