SALTO Neo RIM for SCHALGE B-Series Deadbolt Installation Guide

Step 1: Prepare the Deadbolt

Illustration shows the SALTO Neo RIM module (B2) being prepared for attachment to the deadbolt mechanism. An arrow indicates the direction of insertion. A warning symbol ⚠️ is shown, indicating caution is needed.

Step 2: Install Batteries

The illustration shows the battery compartment. Batteries are inserted with correct polarity (indicated by + and - symbols). A green checkmark ✔️ indicates correct installation, while a red cross ❌ indicates incorrect installation.

⚠️ Danger for electronic components due to electrostatic discharge.

Recommended Batteries: SALTO SP01926-5 (Model SP225542).

Note: Screwdriver (PH2) is not included.

A button labeled "[click here]" is shown, likely for more information.

Step 3: Insert RIM Module

The illustration shows the RIM module being pushed into place. Text "[push!]" is displayed. Orange arrows indicate the direction of insertion.

Step 4: Secure the RIM

The illustration shows the RIM module being secured. A sound icon with "[click!]" is displayed, indicating a successful connection. A curved arrow ? shows rotation, and a lock icon ? is present.

Step 5: Mount External Lock Component

Diagram shows the external part of the lock being mounted onto the door.

Step 6: Mount Internal Lock Component

Diagram shows the internal components of the lock being assembled and mounted.

Step 7: Final Assembly

Illustration shows the final assembly of the lock components.

Step 8: Important Programming Note

Crucial Warning: AT THIS POINT DO NOT CLOSE THE DOOR. PROGRAM THE CYLINDER FIRST.

This warning is presented in English, French, Spanish, and Chinese.

Step 1: Access Battery Compartment

Illustrations show the lock mechanism and indicate actions with red crosses ❌, suggesting what not to do. A lock icon ? is shown, with a curved arrow ? indicating unlocking.

Text indicates: "DRY! TROCKEN! DROG! SECO! ASCIUTTO! SEC! 干式" (meaning dry/do not get wet).

Step 2: Remove Old Batteries

Illustration shows the battery compartment being accessed, with red crosses ❌ indicating incorrect handling.

Step 3: Insert New Batteries

Illustration shows new batteries being inserted into the compartment. A green checkmark ✔️ indicates correct polarity, and a warning symbol ⚠️ is shown for incorrect handling.

Step 4: Finalize Battery Installation

Instruction: ONLY LR1 NEW BATTERIES.

Illustration 4.1 shows batteries being inserted. Illustration 4.2 shows the lock mechanism with sound indicators "BEEP BEEP BEEP" ?, suggesting successful battery recognition.

Step 5: Reassemble Lock

Illustration shows the final reassembly of the lock components after battery replacement.

Step 6: Secure Lock

Illustration shows the final securing of the lock mechanism.

Step 7: Maintenance/Settings Icon

An icon showing a wrench ⚙️ and a clock ⏱️ within a circular arrow ? is displayed, possibly indicating maintenance or settings access.